summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-05-10mtd: nand: support GPMI NAND driver for i.MX8Peng Fan
enable the GPMI NAND driver for i.MX8, i.MX8 use similar controller as i.MX8M - register definition for i.mx8 - DMA structure must be 32bit address Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10mtd: mxs_nand: fix the gf_13/14 definition issueHan Xu
gf_13/14 mask was not set correctly in register definition. Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10mxs_nand: Add support for i.MX8MYe Li
Update the gpmi/apbh_dma/bch drivers and relevant registers for i.MX8M. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10nand: mxs: correct bitflip for erased NAND pagePeng Fan
This patch is a porting of http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/ commit/?h=imx_4.1.15_1.0.0_ga&id=e4dacc44d22e9474ec456cb330df525cd805ea38 " i.MX6QP and i.MX7D BCH module integrated a new feature to detect the bitflip number for erased NAND page. So for these two platform, set the erase threshold to gf/2 and if bitflip detected, GPMI driver will correct the data to all 0xFF. Also updated the imx6qp dts file to ditinguish the GPMI module for i.MX6Q with the one for i.MX6QP. " In this patch, i.MX6UL is added and threshold changed to use ecc_strength. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx: cpu: support tmuPeng Fan
Support tmu when print cpu info Signed-off-by: peng Fan <peng.fan@nxp.com>
2020-05-10imx: regs: add more fuse bank structurePeng Fan
Add more fuse bank structure for use. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx8mp: Set default SNSR25C for TMU probe1Ye Li
So far u-boot only load SNSR25C for TMU main probe (probe 0). However, kernel enables two probes. So it also needs to set default SNSR25C of TCALIV1 for blank samples. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx: load calibration parameters from fuse for i.MX8MPYe Li
i.MX8MP thermal which has two probes and supports temperature range from -40 to 125. The driver still uses default 1p HW calibration at 25C and loads calibration parameters from fuse. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx: i.MX8MN: Enable loading TASR and TCALIV from fuseYe Li
Like iMX8MM, iMX8MN also needs SW to load TMU TASR and TCALIV registers value from fuse before enabling TMU calibration. Otherwise the calibration is not exact. Reviewed-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx8mm: Load fuse for TMU TCALIV and TASRYe Li
On iMX8MM, the default value of TMU registers TCALIV and TASR need be loaded from fuse. HW won't do this, it expect SW loads them before using TMU. Reviewed-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10fec: Move imx_get_mac_from_fuse declare to imx fileYe Li
imx_get_mac_from_fuse is used to load MAC address from fuse. On imx8mp, we have two different ENET controllers and both need to call this function. So decouple its declare from fec driver. Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx: add module fuse supportPeng Fan
There are different parts from one SoC. Take i.MX6ULL for example, some part might not have ENET, some might have; some might not have USB, some might have. The information could be got from OCOTP, to make one image support the different parts, we need runtime disable linux kernel dts node and uboot driver probe if the corresponding module not exists in the part. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQMarek Vasut
Add initial support for Technexion Pico-iMX8MQ SoM on PicoPI carrier board. Currently working is ethernet, serial, eMMC. DT is imported from Linux 5.4.28 ("462afcd6e7ea") . Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-05-10Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
2020-05-07cmd: cache: Fix non-cached memory cachabilityPatrice Chotard
If dcache is switched OFF to ON state and if non-cached memory is used, this non-cached memory must be re-declared as uncached to mmu each time dcache is set ON. Introduce noncached_set_region() to set this non-cached region's mmu settings. Let architecture override it by defining it as a weak function. For ARM architecture, noncached_set_region() defines all noncached region as non-cacheable. Issue found on STM32MP1 platform using dwc_eth_qos ethernet driver, when going from dcache OFF to dcache ON state, ethernet driver issued TX timeout errors when performing dhcp or ping. It can be reproduced with the following sequence: dhcp while true ; do ping 192.168.1.300 ; dcache off ; ping 192.168.1.300 ; dcache on ; done Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Cc: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Reviewed-by: Marek Vasut <marex@denx.de>
2020-05-07arm: juno: enable USBAndre Przywara
The Juno board features a standard compliant EHCI/OHCI USB host controller pair, which we can just enable. The platform data is taken from the device tree. This allows to use USB mass storage (the only storage on a Juno r0) for loading. At least on my board USB seems a bit flaky, I need two "usb reset" sequences after the "usb start" to detect an USB hard drive. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-07arm: juno: Use PSCI based resetAndre Przywara
So far the Juno board wasn't implementing reset. Let's just use the already existing PSCI_RESET based method to avoid any extra code. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-07arm: juno: Enable OF_CONTROLAndre Przywara
The Arm Juno board was still somewhat stuck in "hardcoded land", even though there are stable DTs around, and one happens to actually be on the memory mapped NOR flash. Enable the configuration options to let the board use OF_CONTROL, and add a routine to find the address of the DTB partition in NOR flash, to use that for U-Boot's own purposes. This can also passed on via $fdtcontroladdr to any kernel or EFI application, removing the need to actually load a device tree. Since the existing "afs" command and its flash routines require flash_init() to be called before being usable, and this is done much later in the boot process, we introduce a stripped-down partition finder routine in vexpress64.c, to scan the NOR flash partitions for the DT partition. This location is then used for U-Boot to find and probe devices. The name of the partition can be configured, if needed, but defaults to "board.dtb", which is used by Linaro's firmware image provided. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-05Merge git://git.denx.de/u-boot-usbTom Rini
- MediaTek USB host support
2020-05-05Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- Add DM model for P1010RDB - Add I2C DM Model support for P1010RDB, T1042RDB, T2080, T4240RDB, MPC8548CDS, T1024RDB, P4080, P3041DS, P2041RDB, P2020RDB, P1020RDB, P5040DS - Fix reference to READM.qe_firmware
2020-05-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Support 64-bit U-Boot as the payload for coreboot x86
2020-05-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- 2 MVEBU related fixes
2020-05-04Merge tag 'u-boot-imx-20200502' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2020.07 ---------------- - imxrt: fix LCD clock, fix doc - new board: Coral Dev - imx8: enable Cache in SPL. SNVS, update SCFW API - imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading - MX6ULL : is_imx6ull to include i.MX6ULZ - Net: add config to enable TXC delay Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
2020-05-04Merge tag 'u-boot-rockchip-20200501' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - dts clean up to use -u-boot for px30, rk3399 boards - dts sycn from upstream kernel for rk3328, rk3399 - add rockchip rng driver - new board support: rk3328-roc-cc, rk3399-roc-pc,Nanopi M4 2GB
2020-05-04x86: coreboot: Allow building an SPL imageSimon Glass
Make a few adjustments to allow us to build an SPL image for coreboot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04x86: Update SPL for corebootSimon Glass
At present SPL only works on bare-metal builds. With a few tweaks it can be used for coreboot also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04x86: Move work-around out of cpu_jump_to_64bit_uboot()Simon Glass
At present this function copies U-Boot from the last 1MB of ROM. This is not the right way to do it. Instead, the binman symbol should provide the location. But in any case the code should live in the caller, spl_board_load_image(), so that the 64-bit jump function can be used elsewhere. Move it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04x86: Allow building an SPL image for corebootSimon Glass
Coreboot runs in 32-bit mode and cannot run a 64-bit U-Boot. To get around this we can build a combined image with 32-bit SPL and 64-bit U-Boot. Add a build rule and binman definition for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04x86: Move coreboot-table detection to common 32/64-bit codeSimon Glass
At present this function is only available in 32-bit code. Move it to the common cpu file so it can be used by 64-bit U-Boot too. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04arm: dts: uDPU: switch default PHY speed to 3.125GbitJakov Petrina
This resolves issues with certain SFP modules. Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-04powerpc: dts: p1010: add i2c nodeBiwen Li
Add i2c node of p1010 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04powerpc: Enable device tree support for P1010RDBHou Zhiqiang
Add device tree for P1010RDB boards and enable CONFIG_OF_CONTROL so that device tree can be compiled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dm: powerpc: T1040/T1042: add i2c DM supportBiwen Li
This supports i2c DM for SoC T1040/T1042 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dm: powerpc: T2080/T2081: add i2c DM supportBiwen Li
This supports i2c DM for SoC T2080/T2081 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dm: ppc: T4240: add i2c DM supportBiwen Li
This supports i2c DM for SoC T4240 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dm: powerpc: T1023/T1024: add i2c DM supportBiwen Li
This supports i2c DM for SoC T1023/T1024 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04powerpc: dts: P4080: add i2c nodeBiwen Li
This adds i2c node for SoC P4080 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04powerpc: dts: P3041: add i2c nodeBiwen Li
This adds i2c node for SoC P3041 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dm: powerpc: P2041RDB: add i2c DM supportBiwen Li
This supports i2c DM for board P2041RDB Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dts: powerpc: P2020RDB: add i2c nodeBiwen Li
This adds i2c node for board P2020RDB Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dm: powerpc: P1020: add i2c DM supportBiwen Li
This supports i2c DM for SoC P1020 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dm: powerpc: P5040DS: add i2c DM supportBiwen Li
This supports i2c DM for board P5040DS Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04powerpc: create dts component of i2c to build up an SoCBiwen Li
Provide a common i2c components that we can utilize to build up the various device tree. Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-03cpu: imx8: show RevC instead of Rev? at boot logFrank Li
Add REVC informaiton. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-02arm: dts: mt7629: add usb related nodesChunfeng Yun
Add usb, phy and clock nodes Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02test: dm: phy: add a test item for the phy_bulk APIChunfeng Yun
Add a test item for the phy_bulk API Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02test: dm: add test item for ofnode_get_child_count()Chunfeng Yun
Add a test item for ofnode_get_child_count() Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-01actions: Fix syntax for enabling SYS_RELOC_GD_ENV_ADDRTom Rini
The correct syntax is 'select SYS_...' and not 'select CONFIG_SYS...' Fixes: d5c819b885c2 ("actions: Move defconfig options to Kconfig") Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-01imx: spl: Fix use of removed SPL_FAT_SUPPORT configHarald Seiler
CONFIG_SPL_FAT_SUPPORT was removed in commit 0c3a9ed409a5 ("spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT"). Fixup a leftover use of the symbol. Fixes: 9d86dbd9cf9d ("imx: spl: implement spl_boot_mode for i.MX7/8/8M") Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01imx: spl: Remove ifdefs in spl_mmc_boot_mode()Harald Seiler
It is hard to read code which contains nested ifdef blocks. Replace them with normal if-blocks and the IS_ENABLED() macro. This is not only more readable but also helps as both arms are validated by the compiler in all cases. Signed-off-by: Harald Seiler <hws@denx.de>
generated by cgit (git 2.34.1) at 2024-12-27 05:57:31 +0000