summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-07-17acpi: Support copying properties from device tree to ACPISimon Glass
Some drivers in Linux support both device tree and ACPI. U-Boot itself uses Linux device-tree bindings for its own configuration but does not use ACPI. It is convenient to copy these values over to the ACPI DP table for passing to linux. Add some convenience functions to help with this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add a function to get a device path and scopeSimon Glass
Add a function to build up the ACPI path for a device and another for its scope. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: fsp: Support a warning message when DRAM init is slowSimon Glass
With DDR4, Intel SOCs take quite a long time to init their memory. During this time, if the user is watching, it looks like SPL has hung. Add a message in this case. This works by adding a return code to fspm_update_config() that indicates whether MRC data was found and a new property to the device tree. Also add one more debug message while starting. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Tested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUMESimon Glass
At present this enables a few arch-specific members of the global_data struct which are otherwise not part of the struct. As a result we have to use #ifdef in various places. The cost of always having these in the struct is small. Adjust things so that we can use compile-time code instead of #ifdefs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: p2sb: make P2SB driver depend on P2SB uclassWolfgang Wallner
Currently it is possible to select the P2SB driver without selecting the P2SB uclass, which can't work. Fix this by adding a "depends on" in Kconfig. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-16arm: dts: imx7: Fix error in coresight TPIU graph connectionIlko Iliev
OF graph endpoint connections must be bidirectional and dtc warn if they are not. i.MX7 based DTs have an error and generate warnings: arch/arm/dts/imx7d-sdb.dtb: Warning (graph_endpoint): /replicator/ports/port@0/endpoint: graph connection to node '/soc/tpiu@30087000/port/endpoint' is not bidirectional arch/arm/dts/imx7d-sdb.dtb: Warning (graph_endpoint): /soc/tpiu@30087000/port/endpoint: graph connection to node '/replicator/ports/port@1/endpoint' is not bidirectional Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2020-07-16ARM: mx6: make CAAM usable on the i.MX6 boardsHeinrich Schuchardt
Even if the HAB fuse is not set we want to be able to use the Cryptographic Accelerator and Assurance Module (CAAM) for generating random numbers. So SYS_FSL_HAS_SEC should be selected even if IMX_HAB is not set. arch_misc_init() has to be called to initialize the CAAM. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16misc: scu_api: Add SCFW API to get the index of boot container setYe Li
Add SCFW API sc_misc_get_boot_container to get current boot container set index. The index value returns 1 for primary container set, 2 for secondary container set. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-07-14arm: imx6q: pcm058: Convert pcm058 to use DM with DTsNiel Fourie
Convert pcm058 support to use device trees and the driver model. Add rudimentary boot scripts to the environment, expand README. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-07-14arm: dts: imx6q: Add Linux dts files for Phytec MiraNiel Fourie
Add Phytec Mira device tree files, for use with pcm058. >From Linux 5.6, commit 7111951b8d49 upstream Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-07-14imx8m: implement armv8_el2_to_aarch32Peng Fan
Add iMX8M specific armv8_el2_to_aarch32 to let AArch64 mode U-Boot could boot aarch32 mode linux with FIT image as below: /dts-v1/; / { description = "Configuration to load ARM32 Linux"; images { kernel@1 { description = "ARM32 Linux kernel"; data = /incbin/("./Image"); type = "kernel"; arch = "arm"; os = "linux"; compression = "none"; load = <0x40008000>; entry = <0x40008000>; hash@1 { algo = "md5"; }; }; fdt@1 { description = "Flattened Device Tree blob"; data = /incbin/("./imx8mm-evk.dtb"); type = "flat_dt"; arch = "arm"; compression = "none"; load = <0x43000000>; hash@1 { algo = "md5"; }; }; }; configurations { default = "config@1"; config@1 { description = "fsl-imx8mm-evk"; kernel = "kernel@1"; fdt = "fdt@1"; }; }; }; Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8m: Refactor the OPTEE memory removalPeng Fan
Current codes assume the OPTEE address is at the end of first DRAM bank. Adjust the process to allow OPTEE in the middle of first bank. When OPTEE memory is removed from first bank, it may split the first bank to two banks, adjust the MMU table for the split case, Since the default CONFIG_NR_DRAM_BANKS is 4, it is enough, just enlarge i.MX8MP evk to default to avoid issue. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Silvano di Ninno <silvano.dininno@nxp.com> Tested-by: Silvano di Ninno <silvano.dininno@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8m: disable nodes before kernel/mfgtool boot for fused partPeng Fan
To fused part, we need to disable nodes of dtb to let kernel boot. To mfgtool, USB issue when using super-speed for mfgtool, temporally work around the problem to use high-speed only. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8mn/imx8mp: override env_get_offset and env_get_locationYe Li
To use one defconfig for all boot device, we have to runtime set env offset and return env medium according to the boot device. This patch overrides the env_get_offset and env_get_location to implement the feature. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8m: power down fused coresPeng Fan
For non-Quad SoCs, the fused cpu cores could be powered down in SPL to save power. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8mp: Add fused parts supportYe Li
iMX8MP has 6 fused parts in each qualification tier, with core, VPU, ISP, NPU or DSP fused respectively. The configuration tables for enabled modules: MIMX8ML8DVNLZAA Quad Core, VPU, NPU, ISP, DSP MIMX8ML7DVNLZAA Quad Core, NPU, ISP MIMX8ML6DVNLZAA Quad Core, VPU, ISP MIMX8ML5DVNLZAA Quad Core, VPU MIMX8ML4DVNLZAA Quad Lite MIMX8ML3DVNLZAA Dual Core, VPU, NPU, ISP, DSP Add the support in U-Boot Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8m: workaround ROM serrorPeng Fan
ROM SError happens on two cases: 1. ERR050342, on iMX8MQ HDCP enabled parts ROM writes to GPV1 register, but when ROM patch lock is fused, this write will cause SError. 2. ERR050350, on iMX8MQ/MM/MN, when the field return fuse is burned, HAB is field return mode, but the last 4K of ROM is still protected and cause SError. Since ROM mask SError until ATF unmask it, so then ATF always meets the exception. This patch works around the issue in SPL by enabling SPL Exception vectors table and the SError exception, take the exception to eret immediately to clear the SError. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8m: add eqos clkPeng Fan
Add imx_eqos_txclk_set_rate/imx_get_eqos_csr_clk to override the weak function in driver Add set_clk_eqos to configure eQoS clk Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8m: add sdhc/nand/ecspi clk apiPeng Fan
Current DM CLK is a bit complicated, for simplity, let DM clk only support enable/disable/get_rate. For the expected rate settings, we use non-DM clk to do that. Then we could have simple DM clk for i.MX and could also share between SPL/U-Boot proper. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8m: configure NoC clkPeng Fan
Configure NoC clk for better system performance Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8m: configure arm clk sources from PLLPeng Fan
A53 CCM root max support 1GHz, to support high freq, we need to switch ARM clk sources from ARM PLL directly. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx: remove imx sip filePeng Fan
We have switch to use arm_smccc_smc, no need to keep i.MX specific sip wrapper. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx: bootaux: use arm_smccc_smcPeng Fan
Use arm_smccc_smc to replace call_imx_sip Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8m: soc: use arm_smccc_smcPeng Fan
Use arm_smccc_smc to replace call_imx_sip Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14imx8: misc: use arm_smccc_smcPeng Fan
Use arm_smccc_smc to replace call_imx_sip Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14drivers: ddr: imx Workaround for i.MX8M DDRPHY rank to rank issueOliver Chen
Add logic to automatically update umctl2's setting based on phy training CDD value for rank to rank space issue Acked-by: Ye Li <ye.li@nxp.com> Signed-off-by: Oliver Chen <Oliver.Chen@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14drivers: ddr: imx8mp: Add inline ECC feature supportSherry Sun
the DRAM Controller in i.MX8MP will support a feature called "Inline ECC". This is supported for all 3 supported DRAM technologies (LPDDR4, DDR4 and DDR3L). When this feature is enabled by software, the DRAM Controller reserves 12.5% of DRAM capacity for ECC information, and presents only the non-ECC portion (lower 87.5% of the installed capacity of DRAM) to the rest of the SoC. The DRAM memory can be divided into 8 regions so that if a use case only requires ECC protection on a subset of memory, then only that subset of memory need support inline ECC. If this occurs, then there is no performance penalty accessing the non-ECC-protected memory (no need to access ECC for this portion of the memory map). This is all configured with the DRAM Controller. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-13arm: k3: use correct weak function name spl_board_prepare_for_linuxPatrick Delaunay
Replace the function spl_board_prepare_for_boot_linux by the correct name of the weak function spl_board_prepare_for_linux defined in spl.h. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-13arm: k3: Consolidate and silence k3_fit_atf.sh callJan Kiszka
Buiding u-boot-spl-k3[_HS].its is currently unconditionally verbose about what it does. Change that by wrapping the call to k3_fit_atf.sh into a cmd, also using that chance to reduce duplicate lines of makefile code - only IS_HS=1 is different when CONFIG_TI_SECURE_DEVICE is on. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-07-13arm: dts: k3-am65: Sync CPSW DT node from kernelVignesh Raghavendra
Sync CPSW DT node from kernel and move it out of -u-boot.dtsi file. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13arm: dts: k3-j721e: Sync CPSW DT node from kernelVignesh Raghavendra
Sync CPSW DT node from Kernel and move it out of -u-boot.dtsi file. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DTVignesh Raghavendra
Sync DT bindings from kernel DT and move them to out of -u-boot.dtsi files. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2020-07-11Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- Enable DM_SPI on siemens omap boards (Jagan) - Dropped some non-dm supported omap3 boards (Jagan) - Dropped non-dm code in omap3 spi driver (Jagan) - Dropped non-dm code in kirkwood spi driver (Bhargav)
2020-07-11Merge tag 'uniphier-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2020.10 - remove workaround for Cortex-A72 - increase U-Boot proper size to 2MB - sync DT with Linux - add system bus controller driver - improve serial driver - add reset assertion to Denali NAND driver
2020-07-11ARM: uniphier: remove NAND reset codeMasahiro Yamada
Now that commit 3e57f879eee6 ("mtd: nand: raw: denali: Assert reset before deassert") added the reset assertion, this code in the board file is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-11ARM: uniphier: remove sbc/ directoryMasahiro Yamada
Now that this directory contains only uniphier_sbc_boot_is_swapped(), move it to boot-device.c and delete the sbc/ directory entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-11bus: uniphier-system-bus: move hardware init from board filesMasahiro Yamada
Move the bus initialization code to this driver from board files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-11bus: uniphier-system-bus: add UniPhier System Bus driverMasahiro Yamada
Since commit 1517126fdac2 ("ARM: uniphier: select DM_ETH"), DM-based drivers/net/smc911x.c is compiled, but it is never probed because the parent node lacks the DM-based driver. I need a skeleton driver to populate child devices (but the next commit will move more hardware settings to the this driver). I put this to drivers/bus/uniphier-system-bus.c because this is the same path as the driver in Linux kernel. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-11ARM: uniphier: remove support for NOR Flash on support cardMasahiro Yamada
I actually do not see this used these days because eMMC or NAND is used for non-volatile devices. Dump the burden to maintain this crappy code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-11ARM: uniphier: remove unused uniphier_sbc_init_admulti()Masahiro Yamada
This was used by the old sLD3 SoC, the support of which was removed by commit 00aa453ebf56 ("ARM: uniphier: remove sLD3 SoC support"). There is no more user of this function. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-11ARM: uniphier: fix build error when CONFIG_MICRO_SUPPORT_CARD=nMasahiro Yamada
If CONFIG_MICRO_SUPPORT_CARD is unset, the build fails due to function redefinition. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-11ARM: uniphier: sync with Linux 5.8-rc4Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-11ARM: uniphier: consolidate SoC select menuMasahiro Yamada
Currently, the supports for the following two ARMv7 SoC groups are exclusive, because the boot ROM loads the SPL to a different address: - LD4, sLD8 (SPL is loaded at 0x00040000) - Pro4, Pro5, PXs2, LD6b (SPL is loaded at 0x00100000) This limitation exists only when CONFIG_SPL=y. Instead of using crappy CONFIG options, checking SPL and SPL_TEXT_BASE is cleaner. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-11Revert "ARM: uniphier: add weird workaround code for LD20"Masahiro Yamada
This reverts commit 45f41c134baf5ff1bbf59d33027f6c79884fa4d9. This weird workaround was the best I came up with at that time to boot U-Boot from TF-A. I noticed U-Boot successfully boots on LD20 (i.e. CA72 CPU) by using the latest TF-A. Specifically, since the following TF-A commit, U-Boot runs at EL2 instead of EL1, and this issue went away as a side-effect. |commit f998a052fd94ea082833109f25b94ed5bfa24e8b |Author: Masahiro Yamada <yamada.masahiro@socionext.com> |Date: Thu Jul 25 10:57:38 2019 +0900 | | uniphier: run BL33 at EL2 | | All the SoCs in 64-bit UniPhier SoC family support EL2. | | Just hard-code MODE_EL2 instead of using el_implemented() helper. | | Change-Id: I7ab48002c5205bc8c013e1b46313b57d6c431db0 | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> However, if I reverted that, this problem would come back, presumably because some EL1 code in U-Boot triggers this issue. Now that commit f8ddd8cbb513 ("arm64: issue ISB after updating system registers") fixed this issue properly, this weird workaround is no longer needed irrespective of the exception level at which U-Boot runs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-10Merge tag 'dm-pull-10jul20' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm of-platdata: better phandle and compatible-string support patman support for Python3 on Ubuntu 14.04 new checkpatch check to avoid #ifdefs
2020-07-10Merge tag 'rpi-next-2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi - add support for PCI and XHCI for RPi4 (64 bit only) - optionally reset XHCI device on registration - enable USB_KEYBOARD for rpi_4_defconfig
2020-07-10rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)Marek Szyprowski
Create a non-cacheable mapping for the 0x600000000 physical memory region, where MMIO registers for the PCIe XHCI controller are instantiated by the PCIe bridge. Due to 32bit limit in the CPU virtual address space in ARM 32bit mode, this region is mapped at 0xff800000 CPU virtual address. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-07-10arm: provide a function for boards init code to modify MMU virtual-physical mapMarek Szyprowski
Provide function for setting arbitrary virtual-physical MMU mapping and cache settings for the given region. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-10arm: update comments to the common styleMarek Szyprowski
Update the comments in include/asm/system.h to the common style. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-10arm: rpi: Add function to trigger VL805's firmware loadNicolas Saenz Julienne
On the Raspberry Pi 4, after a PCI reset, VL805's (a xHCI chip) firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's VideCore (the SoC's co-processor). Introduce the function that informs VideCore that VL805 may need its firmware loaded. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
generated by cgit (git 2.34.1) at 2024-12-29 06:42:52 +0000