summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-04-23ARM: dts: stm32: Update sdmmc binding for stm32mp157c-ed1Patrice Chotard
Update some sdmmc properties which have been updated with v4.19 DT bindings: - st,dirpol becomes st,sig-dir - st,negedge becomes st,neg-edge - st,pin-ckin becomes st,use-ckin Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Update sdmmc binding for stm32h743i-evalPatrice Chotard
Update some sdmmc properties which have been updated with v4.19 DT bindings: - st,dirpol becomes st,sig-dir - st,negedge becomes st,neg-edge - st,pin-ckin becomes st,use-ckin Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Restore old usart1 clock bindings for stm32f7Patrice Chotard
As U-boot stm32f clock driver doesn't support new bindings for auxiliary clocks (clocks = <&rcc 1 ....>), restore old bindings for usart1 to get console output. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7Patrice Chotard
Synchronize stm32h7 device tree with kernel v4.20. U-boot DT files and pinctrl bindings are updated, useless nodes are removed and gpio compatible added. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: Migrate U-boot nodes to U-boot DT files for stm32h7Patrice Chotard
In order to prepare and ease future DT synchronization with kernel DT, migrate all U-boot specific nodes/properties/addons to U-boot DT files. As sdmmc is not yet supported on kernel side, sdmmc nodes are located in eval-u-boot and disco-u-boot DT files. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7Patrice Chotard
Synchronize stm32f7 device tree with kernel v4.20. All pinctrl bindings are updated. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Migrate U-boot nodes to U-boot DT files for stm32f7Patrice Chotard
In order to prepare and ease future DT synchronization with kernel DT, migrate all U-boot specific nodes/properties/addons to U-boot DT files. Migrate also DT nodes which are not yet available on kernel DT side as ethernet, ltdc and qspi nodes. Fix ethernet_mii pins and add missing qspi_pins for stm32746g-eval Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4Patrice Chotard
Synchronize stm32f7 device tree with kernel v4.20. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM:dts: stm32: sort nodes by alphabetical order in f4 u-boot filesPatrice Chotard
Sort nodes alphabetically to be coherent with all others STM32 DT files. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-18Merge tag 'arc-for-2019.07' of git://git.denx.de/u-boot-arcTom Rini
In this small series we migrate ARC boards to DM_MMC so we're hopefully are good now and our boards will be kept in U-Boot for some more time :)
2019-04-18ARC: [plat-axs10x]: migrate to DM_MMCEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18ARC: [plat-hsdk]: migrate to DM_MMCEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-17arm: am57xx: cl-som-am57x: remove board supportUri Mashiach
U-Boot support for the CL-SOM-AM57x module is no longer required. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2019-04-17Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- Convert DM_MMC and DM_SCSI - A20, R40, H6 Linux dts(i) sync - CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx/FPGA changes for v2019.07 fpga: - Add support for external data in FIT - Extend testing for external data case - Inform user about a need to run post config on Zynq arm: - Tune zynq command functions - Fix internal variable setting arm64: - Add support for zc39dr decoding - Disable WDT for zcu100 - Small changes in reset_reason() - Some DT changes (spi) - Tune qspi-mini configuration - Remove useless eeprom setting - Fix two sdhci boot case spi: - Fix tap delay programming clk: - Enable i2c in SPL net: - Fix gem phydev handling - Remove phy detection code from gem driver general: - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17Merge tag 'uniphier-v2019.07' of git://git.denx.de/u-boot-uniphierTom Rini
UniPhier SoC updates for v2019.07 - Sync DT with Linux 5.1-rc4 - Enable CONFIG_SUPPORT_EMMC_RPMB for uniphier_v8_defconfig
2019-04-17arm: sunxi: Enable DM_MMC and DM_SCSIJagan Teki
- Enable DM_MMC if MMC defined - Enable DM_SCSI if SCSI defined globally through Allwinner platform, the effected SoC families and boards will make use of MMC and SCSI subsystems in driver-model. Tested DM_MMC in one board from A64, H6, H5, H3, R40, A83T, A20, A10 SoCs. Tested-by: Pablo Sebastián Greco <pgreco@centosproject.org> # BPI-M2-Ultra Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: dts: sun8i-r40-bananapi-m2-berry: Enable AHCIJagan Teki
Enable ahci node for BPI-M2-Berry, this would require since we have DM_SCSI enabled on the respective SoC. Unable to sync the same node from Linux, since the similar change is still in Linux ML. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: dts: a20-wits-pro-a20-dkt: Enable AHCIJagan Teki
Enable ahci node for a20-wits-pro-a20-dkt, this would require since we have DM_SCSI enabled on the respective SoC. Right now, ahci enabled in -u-boot.dtsi and will remove once same supported by Linux. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: dts: a20-m5: Enable AHCIJagan Teki
Enable ahci node for sun7i-a20-m5.dts, this would require since we have DM_SCSI enabled on the respective SoC. No need to send patch to Linux for this change, since this dts is U-Boot specific. Cc: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2Jagan Teki
Sync sun7i-a20 dts(i) files from Linux 5.1-rc2 Linux commit details about the sun7i-a20* sync: "ARM: dts: sun7i: bananapi: Add GPIO banks regulators" (sha1: 09c6572290f018d73ec2e812e28bada34d41815f) Here are U-Boot specific dts changes. - s/uart0_pins_a/uart0_pb_pins for sun7i-a20-ainol-aw1.dts sun7i-a20-m5.dts sun7i-a20-primo73.dts sun7i-a20-yones-toptech-bd1078.dts sunxi-itead-core-common.dtsi - s/gmac_pins_mii_a/gmac_rgmii_pins for sun7i-a20-m5.dts - drop i2c0, i2c1 pins from sunxi-itead-core-common.dtsi - drop mmc0 pins from sun7i-a20-primo73.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2Jagan Teki
Sync sun8i-r40 dts(i) files from Linux 5.1-rc2 Linux commit details about the sun8i-r40* sync: "ARM: dts: sun8i: r40: bananapi-m2-ultra: Add Bluetooth device node" (sha1: 1e5f1db4ccd8348a21da55bff82f4263000879ef) Linux commit details about the sun8i-v40* sync: "ARM: dts: sunxi: Fix I2C bus warnings" (sha1: 0729b4af5753b65aa031f58c435da53dbbf56d19) Cc: Pablo Sebastián Greco <pgreco@centosproject.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: dts: uniphier: sync with Linux 5.1-rc4Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-16arm64: zynqmp: fix preprocessor check for SPL_ZYNQMP_TWO_SDHCILuca Ceresoli
A missing CONFIG_ prefix while checking for this Kconfig variable makes the check always fail. Fix it. While there also switch from the '#if defined' form to the '#ifdef' form as the other checks in this function. Fixes: 35e2b92344b1 ("arm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI") Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Define label for flash nodeSiva Durga Prasad Paladugu
Define a label for flash node so that it can be referenced easily as required. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Add spi-flash compatible string to flash nodeSiva Durga Prasad Paladugu
spi-flash compatible string is needed for reading tx and rx bus widths, hence add this compatible string to flash node. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Add debug message about clearing BSSMichal Simek
Just have better view on system. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-15Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imxTom Rini
Move to DM ----------- - DM support in sata - Toradex Board to DM - wandboard to DM - tbs2910 to DM - GE boards to DM - VHybrid boards to DM - DM_VIDEO for i.MX
2019-04-15Merge tag 'efi-2019-07-rc1-2' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc1 (2) In the aarch64 crash dump information about the loaded EFI images is added. In README.uefi the development target is for the UEFI subsystem is described as "Embedded Base Boot Requirements (EBBR) Specification" compliance. Several bug fixes are supplied.
2019-04-14arm64: allwinner: sun50i: Sync H6 dts(i) files from LinuxJagan Teki
Usually the Linux dts changes were synced in specific tags in Allwinner, to keep track for whats been synced so-far and plan for future syncs. But this patch sync sun50i-h6* dts(i) files from Linux w/o any specific tag since these dts(i) changes are required for new H6 boards support. Linux commit details about the sun50i-h6* sync: "arm64: dts: allwinner: h6: move MMC pinctrl to dtsi" (sha1: 6ba2e45d57afdfd982d12f168edd6a79a65075d8) Linux commit details about the sun8i-tcon-top.h sync: "dt-bindings: display: sunxi-drm: Add TCON TOP description" (sha1: 59a9c39544cd1e5952c2a33028d71aa8180648f8) Part of the sync initiated by 'Clément Péron'. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-14Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
Conflicts: arch/arm/dts/armada-385-amc.dts arch/arm/dts/armada-xp-theadorable.dts arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-13imx6: dts: add wandboard dtb target to fix build errorAnatolij Gustschin
Fix broken build: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: tbs2910: fix dtb build errorAnatolij Gustschin
Fix broken build: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13apalis/colibri_imx6: add device trees to makefileMarcel Ziswiler
Add device trees to Makefile to avoid newly introduced error: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument make[1]: *** [dts/Makefile:28: arch/arm/dts/imx6-apalis.dtb] Error 1 make: *** [Makefile:1009: dts/dt.dtb] Error 2 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13arm: vf610: add uart2 clock/pinmux supportStefan Agner
Add support for Vybrid's UART2 (Colibri UART_B). Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13ARM: dts: colibri_vf: update device treesMarcel Ziswiler
Update device tree in preparation of further driver model migration: Ethernet FEC, ESDHC aka MMC/SD card, I2C, NFC aka NAND flash controller, USBH_PEN GPIO regulator. Add iomux resp. pinctrl entries to be removed from proprietary platform data: DSPI, ESDHC, FEC, I2C, NFC, UART, USBH_PEN GPIO. Introduce a U-Boot specific device tree with some required u-boot,dm-pre-reloc properties: soc, aips0, pinctrl_ddr and uart0 incl. pinctrl. While at it also update the MAINTAINERS file. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13imx: bootaux: add dependency on vf610Marcel Ziswiler
Allow using bootaux also on VF610 aka Vybrid. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13vf610: ddrmc: add missing includeMarcel Ziswiler
The DDR memory controller include file for the Vybrid uses iomux_v3_cfg_t without actually including iomux-vf610.h. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13imx6: wandboard: convert to DM_PMICAnatolij Gustschin
Enable DM_PMIC_PFUZE100 driver and add PMIC description to DTS. Rework power_init_board() code. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: wandboard: add device treeAnatolij Gustschin
Add device trees from Linux in preparation for driver model conversions. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodesAnatolij Gustschin
u-boot,dm-pre-reloc is required for reserving video memory when binding DM_VIDEO driver. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13video: ipuv3: add DM_VIDEO supportAnatolij Gustschin
Extend the driver to build with DM_VIDEO enabled. DTS files must additionally include 'u-boot,dm-pre-reloc' property in soc and ipu nodes to enable driver binding to ipu device. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13board: tbs2910: Add device treeSoeren Moch
... as preparation for additional driver model coonversions. We use CONFIG_OF_EMBED here to keep u-boot.imx as final binary name. So we maintain compatibility with the original TBS u-boot and available HOWTOs for u-boot updates. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13colibri_imx6: migrate to using device treeMarcel Ziswiler
Migrate to using device tree required for further driver model integration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: migrate to using device treeMarcel Ziswiler
Migrate to using device tree required for further driver model integration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13board: ge: ppd: Enable CONFIG_DM_MMCIan Ray
Use MMC device model, and remove USDHC pin configuration code since the pinctrl driver is used. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13arm: imx: Add esdhc3/4 nodes to imx53.dtsiIan Ray
These nodes are required by mx53ppd when built with CONFIG_DM_MMC=y. They are copied from Linux 4.20.5. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13board: ge: ppd: Enable CONFIG_DMIan Ray
Add simplified, generalised, ppd device tree and enable CONFIG_DM. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13board: ge: bx50v3: Enable CONFIG_DM_SPI, CONFIG_DM_SPI_FLASHIan Ray
Use SPI flash device model, and remove SPI pin configuration code since the pinctrl driver is used. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13board: ge: bx50v3: Enable CONFIG_DM_MMCIan Ray
Use MMC device model, and remove USDHC pin configuration code since the pinctrl driver is used. Signed-off-by: Ian Ray <ian.ray@ge.com>
generated by cgit (git 2.34.1) at 2025-01-01 06:57:59 +0000