summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-07-23Merge tag 'efi-2019-10-rc1-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc1 (2) * Implement the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event. * Address errors of type -Werror=address-of-packed-member when building with GCC9.1 * Fix an error when adding memory add addres 0x00000000. * Rework some code comments for Sphinx compliance.
2019-07-23Merge tag 'u-boot-stm32-20190723' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - add rtc driver for stm32mp1 - add remoteproc driver for stm32mp1 - use kernel qspi compatible string for stm32
2019-07-23Merge tag 'rockchip-for-v2019.07-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399 sdhci driver fixup - TPL BANNER fixup
2019-07-22rockchip: TPL banner should depend on CONFIG_TPL_BANNER_PRINTChris Webb
The generic code in common/spl/spl.c allows TPL/SPL banners to be silenced by unsetting CONFIG_TPL_BANNER_PRINT or CONFIG_SPL_BANNER_PRINT respectively. However, arch/arm/mach-rockchip/tpl.c prints this banner unconditionally. Fix the rockchip-specific tpl.c so that the TPL banner depends on CONFIG_TPL_BANNER_PRINT in the same way as the generic code. Signed-off-by: <chris@arachsys.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-22rockchip: Fix TPL build without CONFIG_TPL_SERIAL_SUPPORTChris Webb
If CONFIG_DEBUG_UART is set but CONFIG_TPL_SERIAL_SUPPORT is not, the serial output should be available in SPL and full U-Boot, but not built in TPL. However, the rockchip tpl.c instead fails to compile with undefined references to the debug UART. Instead, initialise the debug UART and print the TPL banner only if both CONFIG_DEBUG_UART and CONFIG_TPL_SERIAL_SUPPORT are set. Signed-off-by: <chris@arachsys.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-22ARM: dts: stm32: Use kernel qspi compatible string for ↵Patrice Chotard
stm32f469-disco-uboot.dtsi For STM32 QSPI driver, "st,stm32-qspi" compatible string was first introduced in U-boot. But later in kernel side, "st,stm32f469-qspi" was used. To simplify, align U-boot QSPI compatible string with kernel one. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-22ARM: dts: stm32: Use kernel qspi compatible string for stm32f7-uboot.dtsiPatrice Chotard
For STM32 QSPI driver, "st,stm32-qspi" compatible string was first introduced in U-boot. But later in kernel side, "st,stm32f469-qspi" was used. To simplify, align U-boot QSPI compatible string with kernel one. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-22dm: core: Introduce xxx_translate_dma_address()Fabien Dessenne
Add the following functions to translate DMA address to CPU address: - dev_translate_dma_address() - ofnode_translate_dma_address() - of_translate_dma_address() - fdt_translate_dma_address() These functions work the same way as xxx_translate_address(), with the difference that the translation relies on the "dma-ranges" property instead of the "ranges" property. Add related test. Test report: => ut dm fdt_translation Test: dm_test_fdt_translation: test-fdt.c Test: dm_test_fdt_translation: test-fdt.c (flat tree) Failures: 0 Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-21Merge tag 'rockchip-for-v2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399 lpddr4 support - rk3399-rock960 board support improvement - Eliminate pyelftools dependency by make_fit_atf.py - clean up rockchip dts to use -u-boot.dtsi - use ARM arch/generic timer instead of rk_timer - clean up Kconfig options for board support
2019-07-20rockchip: make_fit_atf.py: Eliminate pyelftools dependencyChris Webb
make_fit_aft.py depends on the non-standard library pyelftools to pull out PT_LOAD segments from ELF files. However, this is as easy to do manually, without imposing the extra dependency on users. Structures in the ELF file are unpacked into variables named to exactly match the ELF spec to ensure the destructuring code is reasonably self-documenting. Signed-off-by: Chris Webb <chris@arachsys.com> Reviewed-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20rockchip: enable rk322x TPL_BOOTROM_SUPPORT in KconfigKever Yang
The TPL_BOOTROM_SUPPORT is needed for boot from bootrom like other storages. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: use common TPL board fileKever Yang
Use common tpl.c instead of rk3399-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: remove TPL_BOARD_INITKever Yang
RK3399 TPL do not need a dedicate board init, print the firmware info when debug init instead. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: use common secure_timer_init() for spl/tplKever Yang
SPL/TPL share the same secure_timer_init(), update to use one copy source code and update to use CONFIG_ROCKCHIP_STIMER_BASE as base address and rename to function name to rockchip_stimer_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: use common TPL board fileKever Yang
Use common tpl.c instead of rk3368-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: use common TPL board fileKever Yang
Use Common tpl.c instead of rk3288-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: use common TPL board fileKever Yang
Use Common tpl.c instead of rk322x-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: add common tpl board fileKever Yang
Rockchip SoCs have similar boot process, prefer to use TPL for DRAM init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL common board is a basic TPL board init which can be shared for most of SoCs to avoid copy-pase for different SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: evb-px5: switch to use ARM generic timerKever Yang
Default to use ARM generic timer in ARM64, switch from rk timer to generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368-lion: switch to use ARM generic timerKever Yang
Default to use ARM generic timer in ARM64, switch from rk timer to generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: enable stimer for rk3368Kever Yang
Add stimer_init() for spl/tpl so that we able to switch to use arch timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: move sgrf init to spl as arch_cpu_init()Kever Yang
The SoC related init will move to SPL and keep TPL clean, so that we can reuse the common TPL board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: remove rk_timerKever Yang
We have convert all SoC to use DM timer or ARM arch/generic timer, we can remove this rk_timer now. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: remove no use header file in board codeKever Yang
The timer.h is no use any more, remove it from the board files. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3128: use ARM arch timer instead of rk_timerKever Yang
We prefer to use ARM arch timer instead of rockchip timer, so that we are using the same timer for SPL, U-Boot and Kernel, which will make things simple and easy to track to boot time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: use ARM arch timer instead of rk_timerKever Yang
We prefer to use ARM arch timer instead of rockchip timer, so that we are using the same timer for SPL, U-Boot and Kernel, which will make things simple and easy to track to boot time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3036: use ARM arch timer instead of rk_timerKever Yang
We prefer to use ARM arch timer instead of rockchip timer, so that we are using the same timer for SPL, U-Boot and Kernel, which will make things simple and easy to track the boot time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3036: sdram: use udelay instead of rockchip_udelayKever Yang
Use system api for udelay instead of vendor defined api, and rockchip_udelay() will be removed. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: use ARM arch timer instead of rk_timerKever Yang
We prefer to use ARM arch timer instead of rockchip timer, so that we are using the same timer for SPL, U-Boot and Kernel, which will make things simple and easy to track to boot time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: dts: enable spl-boot-orderKever Yang
We share the same default SPL boot order for all rk3288 boards, use dts instead of hard code in board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: spl-boot-order: update dependency to OF_LIBFDTKever Yang
The fdt interfaces are actuall depends on OF_LIBFDT instead of OF_CONTROL, some boards may enable OF_CONTROL while disable OF_LIBFDT. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: popmetal-rk3288: add -u-boot.dtsiKever Yang
Move U-Boot relate dts node/property into -u-boot.dtsi Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: miqi-rk3288: add -u-boot.dtsiKever Yang
Move U-Boot relate dts node/property into -u-boot.dtsi Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288-firefly: sync sdmmc pinctrl from mainlineKever Yang
The rk3288-firefly board have different setting for sdmmc io, sync then from kernel mainline: 6fbc7275c7a9 Linux 5.2-rc7 Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: firefly-rk3288: add -u-boot.dtsiKever Yang
Move U-Boot relate dts node/property into -u-boot.dtsi Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: fennec-rk3288: add -u-boot.dtsiKever Yang
Move U-Boot relate dts node/property into -u-boot.dtsi Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: evb-rk3288: add -u-boot.dtsiKever Yang
Move U-Boot relate dts node/property into -u-boot.dtsi Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: enable TPL for evb-rk3288Kever Yang
Enable TPL for evb-rk3288 so that we can have a free size limited SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: add default TPL_LDSCRIPT value in KconfigKever Yang
We share the same TPL_LDSCRIPT for all rk3288 board, add default value in Kconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: move configure_l2ctlr back to rk3288Kever Yang
The configure_l2ctlr() is used only by rk3288, do not need to locate in sys_proto.h Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: add arch_cpu_init in splKever Yang
Add arch_cpu_init() in SPL for soc related init, and move configure_l2ctlr() into it. The arch_cpu_init() only need to run once, so no need to run in TPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3328: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: use defaule value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3368 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3328: use defaule value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3328 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: use default value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3399 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: use default value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3288 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: use defconfig for SYS_MALLOC_F_LENKever Yang
There is no difference in rk322x board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-28 03:19:02 +0000