summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-10-25Merge tag 'mips-pull-2019-10-25' of git://git.denx.de/u-boot-mipsTom Rini
- bmips: add BCRM NAND support for BCM6368, BCM6328, BCM6362 and BCM63268 SoCs - bmips: various small fixes - mtmips: add new drivers for clock, reset-controller and pinctrl - mtmips: add support for high speed UART - mtmips: update/enhance drivers for SPI and ethernet - mtmips: add support for MMC
2019-10-25Merge branch '2019-10-24-ti-imports'Tom Rini
- Enable DFU on dra7xx boards - Further Keystone 3 platform improvements
2019-10-25arm: dts: k3-am65: Add R5F ranges in interconnect nodesSuman Anna
Add the address spaces for the R5F cores in MCU domain to the ranges property of the cbass_mcu interconnect node so that the addresses within the R5F nodes can be translated properly by the relevant OF address API. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25armv7R: K3: j721e: Add support for triggering ddr init from SPLLokesh Vutla
In SPL, DDR should be made available by the end of board_init_f() so that apis in board_init_r() can use ddr. Adding support for triggering DDR initialization from board_init_f(). Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25arm: dts: k3-j721e: Add ddr nodeLokesh Vutla
Use the 3733MTs DDR configuration that is auto generated from DDR_Regconfig tool. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2019-10-25ram: k3-am654: Do not rely on default values for certain DDR registerJames Doublesin
Added the following registers to the DDR configuration: - ACIOCR0, - ACIOCR3, - V2H_CTL_REG, - DX8SLxDQSCTL. Modified enable_dqs_pd and disable_dqs_pd to only touch the associated bit fields for pullup and pulldown registers (to preserve slew rate and other bits in that same register). Also update the dts files in the same patch to maintain git bisectability. Signed-off-by: James Doublesin <doublesin@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25armv7r: dts: am654-base-board: Rename 1600MHz to 1600MTs in dtsi filenameJames Doublesin
The current configuration of DDR on AM654 base board is for 1600MTs but the file name is specified as k3-am654-base-board-ddr4-1600MHz.dtsi. Since 1600MHz is misleading, rename it to k3-am654-base-board-ddr4-1600MTs.dtsi Signed-off-by: James Doublesin <doublesin@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25arm: K3: Clean and invalidate Linux Image before jumping to LinuxLokesh Vutla
U-Boot cleans and invalidate L1 and L2 caches before jumping to Linux by set/way in cleanup_before_linux(). Additionally there is a custom hook provided to clean and invalidate L3 cache. Unfortunately on K3 devices(having a coherent architecture), there is no easy way to quickly clean all the cache lines for L3. The entire address range needs to be cleaned and invalidated by Virtual Address. This can be implemented using the L3 custom hook but it take lot of time to clean the entire address range. In the interest of boot time this might not be a viable solution. The best hit is to make sure the loaded Linux image is flushed so that the entire image is written to DDR from L3. When Linux starts running with caches disabled the full image is available from DDR. Reported-by: Andrew F. Davis <afd@ti.com> Reported-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25boot: arm: Enable support for custom board_prep_linuxLokesh Vutla
Once the arch specific boot_prepare_linux completes, boards wants to have a custom preparation for linux. Add support for a custom board_prep_linux. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25ARM: dts: dra7: Add usb peripheral nodes in splFaiz Abbas
Add usb peripheral and usb phy nodes in spl to enable SPL_DFU bootmode. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-25Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DWC3 improvements - i.MX7 EHCI bugfix
2019-10-25Merge tag 'u-boot-atmel-2020.01-b' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel Second set of u-boot-atmel features and fixes for 2020.01 cycle This feature set includes Eugen's work on a new tiny flexcom driver and eeprom mac retrieval for the sam9x60-ek board.
2019-10-25Merge tag 'xilinx-for-v2020.01-part2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 part 2 common: - Fix manual relocation for repeatable commands arm: - Also clean up generated dtbos microblaze: - Add support for Manual relocation in crypto framework - Tune and align architecture bootm support zynq: - DT sync ups - Some defconfig updates - Remove empty board_early_init_f() zynqmp: - Clean firmware handing via drivers/firmware/ - DT/defconfig name alignments - DT cleanups with using firmware based clock driver - Some defconfig updates - Add IIO ina226 DT description - Tune zynqmp_psu_init_minimalize.sh script - Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216 versal: - Clean firmware handing via drivers/firmware/ - Add gpio support - Enable DT overlay/USB/CLK/FPGA - DT updates - Tune mini configuration spi: - gqspi - Remove unused headers
2019-10-25mips: mtmips: select essential drivers in KconfigWeijie Gao
Some drivers (clk, pinctrl, reset, ...) are necessary for reset of the system, they should be always selected. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add default pinctrl to eth nodes for all boardsWeijie Gao
This patch adds default eth pinctrl for all boards. There are two pinctrl nodes used for two scenarios: ephy_iot_mode - for IOT boards which have only one port (PHY0) ephy_router_mode - For routers which have more than one ports Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add default pinctrl for gardena-smart-gateway-mt7688Weijie Gao
This adds default pinctrl (dual SPI chip select) for gardena smart gateway Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add mmc related nodes for mt7628an.dtsiWeijie Gao
This patch adds mmc related nodes for mt7628an.dtsi Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: enable eth port0 led and link poll functions for all boardsWeijie Gao
This patch adds default p0led status and phy0 link polling for all boards. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: update reset controller node for mt7628Weijie Gao
This patch updates reset controller node for mt7628 Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add default pinctrl for uart nodesWeijie Gao
This patch adds default pinctrl for uart nodes Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add pinctrl node for mt7628Weijie Gao
This patch adds pinctrl node with default pin state for mt7628an.dtsi. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add clock node for mt7628Weijie Gao
This patch adds clkctrl node for mt7628 and adds clocks property for some node. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: enable high-speed UART support for mt7628Weijie Gao
All three UARTs of mt7628 are actually MediaTek's high-speed UARTs which support baudrate up to 921600. The high-speed UART is compatible with ns16550 when baudrate <= 115200. Add compatible string to dtsi file so u-boot can use it when serial_mtk driver is built in. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: move uart property clock-frequency into mt7628an.dtsiWeijie Gao
The UART of MT7628 has fixed 40MHz input clock so there is no need to put clock-frequency in every dts files. Just put it into the common dtsi file. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25mips: bmips: switch to board defines for dtbÁlvaro Fernández Rojas
Fixes commit 344db3f, which added missing bmips dtbs depending on their SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: correct name charactersÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: enable vr-3032u nand supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: bcm63268: add support for brcmnandÁlvaro Fernández Rojas
BCM63268 uses 4.0 HW nand controller, which is currently supported by brcmnand driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: bcm6362: add support for brcmnandÁlvaro Fernández Rojas
BCM6362 uses old 2.2 HW nand controller, which isn't currently supported by brcmnand driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: bcm6328: add support for brcmnandÁlvaro Fernández Rojas
BCM6328 uses old 2.2 HW nand controller, which isn't currently supported by brcmnand driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25bmips: bcm6368: add support for brcmnandÁlvaro Fernández Rojas
BCM6368 uses old 2.1 HW nand controller, which isn't currently supported by brcmnand driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25MIPS: add compile time definition of L2 cache sizeRamon Fried
If configuration is set to skip low level init, automatic probe of L2 cache size is not performed and the size is set to 0. Flushing or invalidating the L2 cache will fail in this case. Add a static configuration (SYS_DCACHE_LINE_SIZE) with default set to 0. Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
2019-10-24Merge branch '2019-10-24-UFS-support'Tom Rini
- Add Universal Flash Storage (UFS) support
2019-10-24microblaze: Fix tab indentation in start.SMichal Simek
Use tab instead of spaces. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24microblaze: Unify Linux bootm processMichal Simek
Record two bootstages and add "Starting kernel" message to have standard handoff message between U-Boot and OS. Also use debug() instead of #ifdef DEBUG to clean the code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24microblaze: Fix FDT message in boot_prep_linux()Michal Simek
There is no need to show FDT message in regular flow that's why switch it to debug level. Fixes: 0905046050b0 ("microblaze: Switch to generic bootm implementation") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for e-a2197-00 System ControllerMichal Simek
Add support for System Controller available on e-a2197-00 base board. System is very similar to p-a2197-00 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Remove unused board_early_init_f()Michal Simek
board_early_init_f added by commit e6cc3b25d721 ("arm: zynq: Wire watchdog internals") is no longer needed that's why remove it also with Kconfig enabling. Fixes: ccd063e9812a ("watchdog: Move watchdog_dev to data section (BSS may not be cleared)") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for zcu216Michal Simek
zcu104/6 defconfig was used as source. Standard features are enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for m-a2197-03Michal Simek
It is based on m-a2197-01 with some changes in i2c intrastructure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for m-a2197-02Michal Simek
It is based on m-a2197-01 with some changes in i2c intrastructure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: List lpd watchdog in dtsiMichal Simek
There are use cases where lpd watchdog can be configured for APU use. By design this IP should be listed in zynqmp.dtsi to make sure that node is properly enabled by DTG. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Use power header in zynqmp.dtsiMichal Simek
Use power header and add power-domains property. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Use reset header in zynqmp.dtsiMichal Simek
Wire reset-controller and use macros from reset header. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Use backward compatible string for gemMichal Simek
Add backward compatible string for gem ("cdns,gem"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Switch to xlnx-zynqmp-clk headerMichal Simek
Use prepared header instead of hardcoded values. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Update nand device tree node propertiesNaga Sureshkumar Relli
This patch updates the nand device tree node properties as per updated driver. Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix DT style for ipi mailboxMichal Simek
Remove additional empty space. Fixes: 95497afada58 ("arm64: zynqmp: add firmware and mailbox node to DT") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: dt: Also clean dtbo filesMichal Simek
dtbo files can be also generated that's why also clean them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Fix sdhci node address for versal-mini-emmc1Michal Simek
Add missing trailing 0 to mach node name address with reg property. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-15 06:00:40 +0000