summaryrefslogtreecommitdiff
path: root/board/freescale/imx8qxp_mek/spl.c
AgeCommit message (Collapse)Author
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10imx: imx8qm/qxp: check whether m4 partition bootedPeng Fan
Add code to check m4 partition booted or not, we will use this to runtime set device tree file that passed to Linux Kernel. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-bootPeng Fan
Make sure that all devices that are powered up by SPL are powered down before entering into the u-boot. Otherwise the subsystem/device will never be powered down by SCFW, due to SPL and u-boot are in different partitions. Benefiting from power domain driver, this patch implements the function "imx8_power_off_pd_devices" to power off all active devices. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-04-17imx8qxp_mek: Start with USDHC2 unpoweredFabio Estevam
After triggering a "reboot" command in Linux the following hang in SPL is observed: U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300) Normal Boot WDT: Not found! Trying to boot from MMC2_2 spl: mmc init failed with error: -70 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### This error happens because the CMD_ERR bit is set in the IRQ status register after booting from Linux. To ensure a fresh start, force the VMMC supply to get unpowered first. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-04-25imx8qxp_mek: drop warning due to unused variableStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-04-25imx8qxp: mek: enable dm-spl for pmPeng Fan
with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled, the bind and probe code in board file could be removed. Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28imx8qxp: mek: default enable SPLPeng Fan
Enable SPL for i.MX8QXP MEK, and currently use SPL FIT. The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK. Note: SPL FIT could not support secure boot chain, because i.MX8/8X only support i.MX container format. This container format has not been upstreamed, so we use FIT for now. When SPL container supported, we could switch to that. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-28 13:13:52 +0000