summaryrefslogtreecommitdiff
path: root/board/freescale
AgeCommit message (Collapse)Author
2012-10-15mx6qsabreauto: Add Ethernet supportFabio Estevam
mx6qsabreauto has a AR8031 Gigabit PHY. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15mx31: Fix PDR0_CSI_PODFBenoît Thébaudeau
The CSI PODF bit-field used by the previous code for the i.MX31 CCM PDR0 register is actually composed of two bit-fields: one pre-divider and one post-divider. This patch fixes the CCM access macros and the code using them accordingly. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
2012-10-15mx5/6: Define default SoC input clock frequenciesBenoît Thébaudeau
Define default SoC input clock frequencies for i.MX5/6 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Jason Liu <r64343@freescale.com> Cc: Matt Sealey <matt@genesi-usa.com> Cc: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15mx6q: Add basic support for mx6qsabreautoFabio Estevam
mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15mx6qsabresd: Add 8-bit USDHC supportFabio Estevam
USDHC3 has 8 pins wired in mx6qsabresd. Configure the extra pins. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15mx6qsabresd: Add Ethernet supportFabio Estevam
mx6qsabresd has a AR8031 Gigabit PHY. Add support for it. Also increase CONFIG_SYS_MALLOC_LEN so that FEC buffer allocation does not fail. Tested on 1Gbp and 100Mbps networks. Suggested-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-15mx6: Add basic support for mx6qsabresd board.Fabio Estevam
mx6qsabresd is a board based on mx6q SoC with the following features: - 1GB of DDR3 - 1 USB OTG port - 1 HDMI output port - SPI NOR - LVDS panel - Gigabit Ethernet - Camera Connector - eMMC and SD card slot - Audio Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15mx6q: Factor out common DDR3 init codeFabio Estevam
Factor out common DDR3 initialization code, allowing easier maintainance of such scripts. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-30Merge remote-tracking branch 'u-boot/master'Albert ARIBAUD
2012-09-25Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2012-09-24mx28evk: Remove fecmxc_mii_postcall()Fabio Estevam
fecmxc_mii_postcall() is specific to the KSZ9021 PHY on m28evk and should not be used on mx28evk, which has LAN8270 instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
2012-09-23mx51evk: Add CONFIG_REVISION_TAGBenoît Thébaudeau
FSL 2.6.35 kernel assumes that the bootloader passes the CONFIG_REVISION_TAG information. If this data is not present, the kernel misconfigures the TZIC, which results in the timer interrupt handler never being called, so the kernel deadlocks while calibrating its delay. Suggested-by: Greg Topmiller <Greg.Topmiller@jdsu.com> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-21Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2012-09-20ColdFire: Clean up checkpatch warnings for MCF54451 and MCF54455Alison Wang
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20ColdFire: Clean up checkpatch warnings for MCF547x and MCF548xAlison Wang
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20ColdFire: Clean up checkpatch warnings for MCF523xAlison Wang
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301xAlison Wang
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20ColdFire: Clean up checkpatch warnings for MCF52x2Alison Wang
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-20ColdFire: Clean up checkpatch warnings for MCF5227xAlison Wang
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-18mpc8308rdb: add support for eSDHC MMC controllerIra W. Snyder
Add support for the onboard eSDHC MMC controller. The hardware on the MPC8308RDB has the following errata: - ESDHC111: manual asynchronous CMD12 is broken - DMA is broken (PIO works) Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> [added include fsl_esdhc header to prevent implicit declarations of fsl_esdhc_mmc_init() and fdt_fixup_esdhc()] Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-09-18mpc8308rdb: add support for Spansion SPI flash on header J8Ira W. Snyder
The SPI pins are routed to header J8 for testing SPI functionality. A Spansion flash has been wired up and tested on this header. This patch breaks support for the second TSEC interface, since the GPIO pin used as a chip select is pinmuxed with some of the TSEC pins. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-09-17mx35pdk: README: Remove NAND referencesFabio Estevam
Booting from NAND is currently not supported, so remove its references. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-10MX35: mx35pdk: add support for MMCStefano Babic
Add support for SD card and change the default environment due to increased u-boot size. Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-09-10mx6qsabrelite:Use IMX_GPIO_NR MacroAshok Kumar Reddy
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
2012-09-04mx28evk: Convert to mxs_adjust_memory_params()Fabio Estevam
Recent conversion from mx28_adjust_memory_params to mxs_adjust_memory_params missed to update mx28evk, which caused the board not to boot. Apply the conversion so that the board can boot again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
2012-09-04MX28: mx28evk: Align SSP clock speedOtavio Salvador
Align the SSP clock speed with oscilator to achieve higher transfer stability. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de>
2012-09-01fsl_esdhc: Remove cache snooping for i.MXBenoît Thébaudeau
The cache snooping feature of Freescale's eSDHC IP is not available on i.MX, so disable it globally for this architecture. This avoids setting no_snoop for all i.MX boards, and it prevents setting a reserved bit of a reserved register if fsl_esdhc_mmc_init() is used on i.MX, like in arch/arm/cpu/armv7/imx-common/cpu.c/cpu_mmc_init(). Since no_snoop was only used on i.MX, get rid of it BTW. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com>
2012-09-01mx5:Use IMX_GPIO_NR macroAshok Kumar Reddy
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
2012-09-01mx6qarm2:Use IMX_GPIO_NR macroAshok Kumar Reddy
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'Otavio Salvador
The DRAM initialization, after SPL has complete, is exactly the same for all mxs SoCs so we should name it accordinly. The following boards has been changed: * apx4devkit * m28evk * mx28evk * sc_sps_1 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
2012-09-01mx53ard: Use IMX_GPIO_NR macroFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01mx51evk: Use IMX_GPIO_NR macroFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01mx53loco: Use IMX_GPIO_NR macroFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01MX: Set a common gpio.h for all i.MXStefano Babic
Each i.MX has its own gpio.h, defining the same structure. The internal GPIO controller has the same layout (at least for the register used by u-boot) and can be shared. Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Matt Sealey <matt@genesi-usa.com>
2012-09-01mx53evk: add boot_mode supportTroy Kisky
This allows a watchdog reset to start the ROM's usb/serial downloader, or boot from an sdcard. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-09-01mx6qsabrelite: add boot_mode supportTroy Kisky
This allows a watchdog reset to start the ROM's usb downloader, or boot from an sdcard. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-09-01iomux: move IOMUX_GPR13_xxx definesTroy Kisky
Move mx6 specific defines to arch-mx6 directory. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01mx35: Fix typo on EDIOBenoît Thébaudeau
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01MX28: Move the u-boot.bd info CPUDIR/SOCDIRMarek Vasut
This gets us rid of duplication of the same file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01mx51evk: do not overwrite the consoleFabio Estevam
On this board, the console is always set to the serial line. Do not allow to overwrite it when video is enabled. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01MX5: mx53loco: do not overwrite the consoleStefano Babic
On this board, the console is always set to the serial line. Do not allow to overwrite it when video is enabled. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01mxs: Reowork SPL to use 'mxs' prefix for methodsOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-01mxs: prefix register structs with 'mxs' prefixOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-08-23powerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPLScott Wood
LAW init is skipped in the SPL payload because it's assumed that the SPL has taken care of it -- so make sure the SPL loads all the LAWs as is done on other boards. This bug was introduced by: commit 4589728e214958a4e6e011a081a68d360c49d7a5 Author: Kumar Gala <galak@kernel.crashing.org> Date: Fri Nov 11 08:14:53 2011 -0600 powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND Size grew a bit so nand-spl didn't fit in 4k, reduce done by removing LAW entries not needed during SPL phase. Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-08-23powerpc/85xx: remove support for the Freescale P3060Timur Tabi
The P3060 was cancelled before it went into production, so there's no point in supporting it. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23powerpc/85xx: get rid of enum board_slots in P4080 MDIO driverTimur Tabi
enum board_slots contained six values, where SLOT1 == 1, SLOT2 == 2, and so on. This is pointless, so remove it. Also move the lane_to_slot[] array to the top of the file so that it can be used by other functions. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23powerpc/85xx: introduce function serdes_device_from_fm_port()Timur Tabi
In order to figure out which SerDes lane a given Fman port is connected to, we need a function that maps the fm_port namespace to the srds_prtcl namespace. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23mpc85xx: use LCRR_DBYP define instead of raw constantPaul Gortmaker
Using the raw value of 0x80000000 directly in the code can lead to "count the zeros" bugs like that fixed in commit 718e9d13b98 ("MPC85xxCDS: Fix missing LCRR_DBYP bits for 66-133MHz LBC") Change all existing raw values to use the symbolic value of LCRR_DBYP instead. Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23p1010rdb: fix ddr values for p1014rdb (setting bus width to 16bit)Matthew McClintock
There was an extra 0 in front of the value we were using to mask, remove it to improve the code. Also fix the value written to ddr_sdram_cfg to set the bus width properly to 16 bits Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23powerpc/CoreNet: add tool to support pbl image build.Shaohui Xie
Provides a tool to build boot Image for PBL(Pre boot loader) which is used on Freescale CoreNet SoCs, PBL can be used to load some instructions and/or data for pre-initialization. The default output image is u-boot.pbl, for more details please refer to doc/README.pblimage. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
generated by cgit (git 2.34.1) at 2024-12-28 01:01:02 +0000