uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2017-03-23	arm: mvebu: theadorable: Add board-specific PEX detection pulse width	Stefan Roese
2017-03-23	arm64: a37xx: Disable DB configurations on ESPRESSOBin board	Konstantin Porotchkin
2017-03-23	mvebu: a37xx: Add init for ESPRESSBin Topaz switch	Konstantin Porotchkin
2017-03-23	arm64: a37xx: Handle pin controls in early board init	Konstantin Porotchkin
2017-03-23	arm64: mvebu: Rename the db-88f3720 to armada-37xx platform	Konstantin Porotchkin
2017-03-20	board: ns2: Add support for Broadcom Northstar 2	Jon Mason
2017-03-20	da850: Add instructions to copy AIS image to NAND	ahaslam@baylibre.com
2017-03-20	ARM: k2g: setup PRU ethernet MAC addresses	Roger Quadros
2017-03-20	ARM: Use Kconfig for board EEPROM's I2C bus and chip address	Roger Quadros
2017-03-20	board: ti: am57xx-idk: Auto detect LCD Panel	Nishanth Menon
2017-03-20	board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet	Roger Quadros
2017-03-20	board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD	Roger Quadros
2017-03-20	ti: common: board_detect: commodify ethaddr environment setting code	Roger Quadros
2017-03-20	ti: common: board_detect: Rename EEPROM scratch start macro	Lokesh Vutla
2017-03-19	ti: boot: Register the MMC controllers in SPL in the same way as in u-boot	Jean-Jacques Hiblot
2017-03-19	Merge branch 'master' of git://www.denx.de/git/u-boot-imx	Tom Rini
2017-03-19	imx: ventana: add EMMC configuration	Tim Harvey
2017-03-19	ARM: vf610: move to standard arch/board approach	Stefan Agner
2017-03-19	imx: ventana: make SD3_VSELECT board specific	Tim Harvey
2017-03-19	imx: ventana: make OTG VBUS power enable board specific	Tim Harvey
2017-03-19	imx: ventana: fix hwconfig	Tim Harvey
2017-03-19	imx: ventana: change name of rs232_en to indicate polarity	Tim Harvey
2017-03-19	imx: ventana: move mmc_init to common	Tim Harvey
2017-03-19	imx: ventana: add additional DRAM configurations	Tim Harvey
2017-03-19	colibri_imx7: use device-tree for MTD partitions	Stefan Agner
2017-03-19	colibri_imx7: setup PMIC sleep mode configuration	Stefan Agner
2017-03-19	colibri_imx7: implement board level USB PHY mode	Stefan Agner
2017-03-19	arm: i.MX6UL: add Armadeus Systems OPOS6UL SoM and OPOS6ULDev carrier board	Sébastien Szymanski
2017-03-17	Merge git://git.denx.de/u-boot-rockchip	Tom Rini
2017-03-17	ARM: DT: stm32f7: add qspi pin contol node	Vikas Manocha
2017-03-17	ARM: DT: stm32f7: add ethernet pin contol node	Vikas Manocha
2017-03-17	ARM: DT: stm32f7: add pin control node for serial port pins	Vikas Manocha
2017-03-17	stm32f7: clk: remove usart1 clock enable from board init	Vikas Manocha
2017-03-17	serial: stm32f7: add device tree support	Vikas Manocha
2017-03-17	arm: imx6: tqma6: add support for TQMa6DL variant	Markus Niebel
2017-03-17	arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settings	Markus Niebel
2017-03-17	i.MX6Q: isiot: Switch the mmc env based on devno	Jagan Teki
2017-03-17	i.MX6Q: icorem6_rqs: Add mmc_late_init	Jagan Teki
2017-03-17	i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init	Jagan Teki
2017-03-17	imx6: icorem6_rqs: Add eMMC boot support	Jagan Teki
2017-03-17	mx6: tqma6: clear enet clk sel for mba6	Markus Niebel
2017-03-17	imx6: tqma6: adjust ethernet phy reset delay	Markus Niebel
2017-03-17	imx6: tqma6: disable spi CS unused in U-Boot	Markus Niebel
2017-03-17	imx6: tqma6: use lower driver stength for I2C pins	Markus Niebel
2017-03-17	imx6: tqma6: implement power_init_board	Markus Niebel
2017-03-17	imx6: icorem6_rqs: Update SPL board boot order for eMMC	Jagan Teki
2017-03-17	i.MX6UL: isiot: Switch the mmc env based on devno	Jagan Teki
2017-03-17	i.MX6UL: isiot: Add mmc_late_init	Jagan Teki
2017-03-17	i.MX6UL: isiot: Add modeboot env via board_late_init	Jagan Teki
2017-03-17	i.MX6UL: isiot: Add eMMC boot support	Jagan Teki