summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2011-12-01ppc4xx: remove invalid access to PCI_BRDGOPT2 registerMatthias Fuchs
This patch removes an invalid call to pci_write_config_dword to PCI_BRDGOPT2 register. This function must not be used from pci_target_init and is also at the wrong place. The correct call is done later in pci_target_init via pci_hose_write_config_dword. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2011-12-01ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementationMatthias Fuchs
This patch switches PMC440 board code to the CONFIG_PCI_BOOTDELAY option instead of using a private implemention. This relies on Anatolji's patch that moves the pcidelay handling behind pci_target_init. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-29mpc85xx: support for Freescale COM Express P2020Ira W. Snyder
This adds support for the Freescale COM Express P2020 board. This board is similar to the P1_P2_RDB, but has some extra (as well as missing) peripherals. Unlike all other mpc85xx boards, it uses a watchdog timeout to reset. Using the HRESET_REQ register does not work. This board has no NOR flash, and can only be booted via SD or SPI. This procedure is documented in Freescale Document Number AN3659 "Booting from On-Chip ROM (eSDHC or eSPI)." Some alternative documentation is provided in Freescale Document Number P2020RM "P2020 QorIQ Integrated Processor Reference Manual" (section 4.5). Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-29powerpc/p3060qds: Add board related support for P3060QDS platformShengzhou Liu
The P3060QDS is a Freescale reference board for the six-core P3060 SOC. P3060QDS Board Overview: Memory subsystem: - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus) - 128M Bytes NOR flash single-chip memory - 16M Bytes SPI flash - 8K Bytes AT24C64 I2C EEPROM for RCW Ethernet: - Eight Ethernet controllers (4x1G + 4x1G/2.5G) - Three VSC8641 PHYs on board (2xRGMII + 1xMII) - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3 PCIe: Two PCI Express 2.0 controllers/ports USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board I2C: Four I2C controllers UART: Supports two dUARTs up to 115200 bps for console RapidIO: Two RapidIO, sRIO1 and sRIO2 Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-29sc520: Create arch asm-offsetsGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29cosmetic: checkpatch cleanup of board/eNET/*.cGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-27hawkboard: Replace HAWKBOARD_KICK{0, 1}_UNLOCK definesChristian Riesch
This patch replaces the HAWKBOARD_KICK{0,1}_UNLOCK defines by DV_SYSCFG_KICK{0,1}_UNLOCK. The kick register values are not hawkboard specific but may be used for all davinci boards. In commit f3c149d6c6e5ba8dd72baa86fe527837e4fb0e9a new defines for these values wer introduced. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Syed Mohammed Khasim <sm.khasim@gmail.com> Cc: Sughosh Ganu <urwithsughosh@gmail.com> Cc: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-27davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata boardChristian Riesch
This patch fixes the build breakage for the davinci_sonata board. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sergey Kubushyn <ksi@koi8.net> Cc: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-27davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie boardChristian Riesch
This patch fixes the build breakage for the davinci_schmoogie board. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sergey Kubushyn <ksi@koi8.net> Cc: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-27arm: a320evb: define mach-type in board config fileYan-Pai Chen
MACH_TYPE_FARADAY was dropped from mach-types.h. Add it back to board config file. Signed-off-by: Yan-Pai Chen <ypchen@faraday-tech.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-27Fix Stelian's email addressStelian Pop
Change my old email address which is no longer valid. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-27mvblx: punt unused clean/distclean targetsMichael Jones
Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
2011-11-23Merge branch 'hs@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk
* 'hs@denx.de' of git://git.denx.de/u-boot-staging: drivers/net/dnet.c: Fix GCC 4.6 warnings board/xaeniax/flash.c: Fix GCC 4.6 warnings net/bootp.c: Fix GCC 4.6 warning common/cmd_bootm.c: Fix GCC 4.6 warnings board/mx1ads/mx1ads.c: Fix GCC 4.6 warning board/mx1ads/syncflash.c: Fix GCC 4.6 warnings board/lubbock/flash.c: Fix GCC 4.6 warnings drivers/net/cs8900.c: Fix GCC 4.6 warning arch/arm/cpu/arm926ejs/omap/cpuinfo.c: Fix GCC 4.6 warnings drivers/net/lan91c96.c: Fix GCC 4.6 warning board/ronetix/pm9263/pm9263.c: Fix GCC 4.6 warning drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warning drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning
2011-11-23i2c: Codingstyle cleanup for i2c evb64260 board driverHeiko Schocher
There are some magic constants in this drivers, which I cannot fixup ... Eran, can you help here? Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Eran Man <eran@nbase.co.il>
2011-11-23board/xaeniax/flash.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: flash.c: In function 'flash_erase': flash.c:223:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:392:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23board/mx1ads/mx1ads.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: mx1ads.c: In function 'board_early_init_f': mx1ads.c:83:24: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23board/mx1ads/syncflash.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: syncflash.c: In function 'SF_SR': syncflash.c:60:10: warning: variable 'tmp1' set but not used [-Wunused-but-set-variable] syncflash.c: In function 'SF_PrechargeAll': syncflash.c:96:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] mx1ads.c: In function 'board_early_init_f': mx1ads.c:83:24: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] syncflash.c: In function 'SF_Erase': syncflash.c:112:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] syncflash.c: In function 'flash_init': syncflash.c:155:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23board/lubbock/flash.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: flash.c: In function 'flash_erase': flash.c:223:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:392:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23board/ronetix/pm9263/pm9263.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: pm9263.c: In function 'pm9263_lcd_hw_psram_init': pm9263.c:167:20: warning: variable 'x' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-22env: move extern default_environment[] to environment.hIgor Grinberg
Extract all extern declarations for default_environment[] out of c files into the environment.h header. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
2011-11-22common: move extern char console_buffer[] to common.hIgor Grinberg
Extract all extern declarations for console_buffer[] out of c files into the common.h header. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Frank Gottschling <fgottschling@eltec.de> Cc: Murray Jensen <Murray.Jensen@csiro.au>
2011-11-21Merge branch 'master' of git://git.denx.de/u-boot-niosWolfgang Denk
* 'master' of git://git.denx.de/u-boot-nios: nios2: Offer ft_board_setup() capability and call fdt_fixup_ethernet(). board/nios2-generic: Use altera_pio driver and remove board specific driver gpio: Add driver for Altera's PIO core nios2: Pseudo implement dcache_status/enable/disable()
2011-11-16mpc83xx: km83xx_i2c - fix gcc 4.6 compiler warningKim Phillips
Configuring for kmeter1 board... km83xx_i2c.c: In function 'i2c_make_abort': km83xx_i2c.c:44:8: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Heiko Schocher <hs@denx.de>
2011-11-16mpc83xx: mpc8360emds - fix gcc 4.6 compiler warningKim Phillips
Configuring for MPC8360EMDS_66_HOST_33 - Board: MPC8360EMDS, Options: CLKIN_66MHZ,PCI,PCI_33M,PQ_MDS_PIB=1 mpc8360emds.c: In function 'board_eth_init': mpc8360emds.c:178:12: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-11-16board/cm4008/flash.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: flash.c: In function 'flash_erase': flash.c:209:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:373:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16board/cm41xx/flash.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: flash.c: In function 'flash_erase': flash.c:209:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:373:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16pip405.c: Fix GCC 4.6 build warningsStefan Roese
Fix: pip405.c: In function 'board_early_init_f': pip405.c:192:16: warning: variable 'tctp_clocks' set but not used [-Wunused-but-set-variable] pip405.c:182:16: warning: variable 'dataout' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16mip405.c: Fix GCC 4.6 build warningsStefan Roese
Fix: mip405.c: In function 'init_sdram': mip405.c:250:4: warning: variable 'tctp_clocks' set but not used [-Wunused-but-set-variable] mip405.c: In function 'initdram': mip405.c:629:9: warning: variable 'ds' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16auto_update.c: Fix GCC 4.6 build warningsStefan Roese
Fix: ../common/auto_update.c: In function 'au_check_header_valid': ../common/auto_update.c:94:16: warning: variable 'checksum' set but not used [-Wunused-but-set-variable] ../common/auto_update.c: In function 'do_auto_update': ../common/auto_update.c:400:30: warning: variable 'got_ctrlc' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16cmd_dasa_sim.c: Fix GCC 4.6 build warningsStefan Roese
Fix: cmd_dasa_sim.c: In function 'updatePci9054': cmd_dasa_sim.c:135:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] cmd_dasa_sim.c: In function 'clearPci9054': cmd_dasa_sim.c:189:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16cmd_pci405.c: Fix GCC 4.6 build warningsStefan Roese
Fix: cmd_pci405.c: In function 'do_loadpci': cmd_pci405.c:45:6: warning: variable 'status' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16dlvision-10g.c: Fix GCC 4.6 build warningsStefan Roese
Fix: dlvision-10g.c: In function 'print_fpga_info': dlvision-10g.c:90:11: warning: variable 'feature_compression' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16board/esd/cpci750/sdram_init.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: sdram_init.c: In function 'check_dimm': sdram_init.c:267:50: warning: variable 'trrd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:37: warning: variable 'tras_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:24: warning: variable 'trcd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:8: warning: variable 'trp_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:253:16: warning: variable 'spd_checksum' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'initdram': sdram_init.c:1693:14: warning: variable 's1' set but not used [-Wunused-but-set-variable] sdram_init.c:1693:6: warning: variable 's0' set but not used [-Wunused-but-set-variable] Biggest part o the fix is converting the custom debug code to standard debug(). No attempts were made to cleanup the code. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2011-11-16board/esd/cpci750/cpci750.c: Fix error handlingWolfgang Denk
ThE code recorded error conditions but did not pass these on to the higher level caller. Fixing this fixes also this build warning: cpci750.c: In function 'do_loadpci': cpci750.c:569:6: warning: variable 'status' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2011-11-16board/evb64260/zuma_pbb_mbox.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: zuma_pbb_mbox.c: In function 'zuma_mbox_dump': zuma_pbb_mbox.c:115:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] zuma_pbb_mbox.c:117:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/zuma_pbb_mbox.c: CodingStyle cleanupWolfgang Denk
Make (mostly) checkpatch-clean Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/sdram_init.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: sdram_init.c: In function 'setup_sdram_common': sdram_init.c:333:49: warning: variable 'ecc' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'setup_sdram': sdram_init.c:410:13: warning: variable 'check' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/eth.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: eth.c: In function 'gt6426x_handle_SMI': eth.c:130:15: warning: variable 'psr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/evb64260.c: Fix GC 4.6 build warningWolfgang Denk
Fix: evb64260.c: In function 'debug_led': evb64260.c:363:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/i2c.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: i2c.c: In function 'i2c_init': i2c.c:23:15: warning: variable 'actualFreq' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Eran Man <eran@nbase.co.il> Acked-by: Heiko Schocher <hs@denx.de>
2011-11-16board/evb64260/i2c.c: Coding Style cleanupWolfgang Denk
Make checkpatch-clean Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Eran Man <eran@nbase.co.il>
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk
* 'master' of git://git.denx.de/u-boot-video: api: export LCD device to external apps font: split font data from video_font.h tools: logo: split bmp arrays from bmp_logo.h lcd: add clear and draw bitmap declaration VIDEO: mx3fb: GCC4.6 fix build warnings Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: arm, davinci: add DAVINCI_MMC_CLKID arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: da850/dm365 lowlevel cleanup omap5: Add omap5_evm board build support. omap4/5: Add support for booting with CH. omap5: emif: Add emif/ddr configurations required for omap5 evm omap5: clocks: Add clocks support for omap5 platform. omap5: Add minimal support for omap5430. omap: Checkpatch fixes omap4: make omap4 code common for future reuse GCC4.6: Squash warnings in onenand_base.c GCC4.6: Fix common/usb.c on xscale OneNAND: Add simple OneNAND SPL PXA: vpac270: Enable the new generic MMC driver PXA: Cleanup serial_pxa PXA: Drop csb226 and innokom boards (unmaintained) m28evk: Fix comment about the number of RAM banks mx31: Fix checkpatch warnings in generic.c mx31: Use proper IO accessor for GPR register mx31: Remove duplicate definition for GPR register qong: Use generic function for configuring GPR register M28EVK: Enable USB HOST support iMX28: Add USB HOST driver iMX28: Add USB and USB PHY register definitions M28: Add memory detection into SPL iMX28: Fix ARM vector handling M28: Add doc/README.m28 documentation M28: Add MMC SPL iMX28: Add support for DENX M28EVK board iMX28: Add u-boot.sb target to Makefile iMX28: Add image header generator tool iMX28: Add driver for internal RTC iMX28: Add GPMI NAND driver iMX28: Add APBH DMA driver iMX28: Add SPI driver iMX28: Add GPIO control iMX28: Add I2C bus driver iMX28: Add PINMUX control FEC: Add support for iMX28 quirks iMX28: Add SSP MMC driver iMX28: Initial support for iMX28 CPU MX25: zmx25: GCC4.6 fix build warnings da850: add new config file for AM18xx BeagleBoard: config: Switch to ttyO2 OMAP3: Change omap3_evm maintainer devkit8000: Fix NAND SPL on boards with 256MB NAND integrator: enable Vpp and disable flash protection integrator: add system controller header integrator: make flash writeable on boot integrator: use io-accessors for board init integrator: move text offset to config integrator: pass configs for core modules ARM: remove superfluous setting of arch_number in board specific code. SPL: Allow ARM926EJS to avoid compiling in the CPU support code integrator: do not test first part of the memory arm: a320: fix broken timer ARM: define CONFIG_MACH_TYPE for all ronetix boards dm646x: pass board revision info to kernel dm646x: add new configuration for dm6467T arm, davinci: Fix setting of the SDRAM configuration register arm, davinci: Remove the duplication of LPSC functions arm, davinci: Rename AM1808 lowlevel functions to DA850 da8xxevm: fix build error ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
* 'master' of git://git.denx.de/u-boot-mpc85xx: powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning drivers/qe/uec.c: Fix GCC 4.6 build warning drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning drivers/net/fm/fm.c: Fix GCC 4.6 build warning board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning board/freescale/common/pixis.c: Fix GCC 4.6 build warning board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning phylib: Enable AR8021 phy support powerpc/85xx: Set max alloc length to 10MB on P1022DS powerpc/mpc85xx: Set SYSCLK to the required frequency powerpc/85xx: Fix NAND SPL support powerpc/85xx: Fix MPC8572DS NAND build fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399 powerpc/85xx: Add support for Book-E MMU Arch v2.0 powerpc/85xx: Make inclusion of USB device fixup conditional powerpc/85xx: Fix warning for USB device-fixup powerpc/85xx: resize the boot page TLB before relocating CCSR powerpc/85xx: verify the current address of CCSR before relocating it powerpc/85xx: add some missing sync instructions in the CCSR relocation code powerpc/85xx: fix some comments in the CCSR relocation code powerpc/85xx: fix definition of MAS register macros powerpc/mpc8548cds: Fix network initialization powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129 powerpc/QorIQ: fix network frame manager TBI PHY address settings
2011-11-15font: split font data from video_font.hChe-Liang Chiou
While video_font.h is useful even without referencing the font data, it is not possible to be included multiple times because it defines font data array right in the header. This patch splits the font data array into video_font_data.h and so now video_font.h can be included multiple times. This at least solves the code duplication in board/mcc200/lcd.c. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-15omap4/5: Add support for booting with CH.Sricharan
Configuration header(CH) is 512 byte header attached to an OMAP boot image that will help ROM code to initialize clocks, SDRAM etc and copy U-Boot directly into SDRAM. CH can help us in by-passing SPL and directly boot U-boot, hence it's an alternative for SPL. However, we intend to support both CH and SPL for OMAP4/5. Initialization done through CH is limited and is not equivalent to that done by SPL. So U-Boot has to distinguish between the two cases and handle them accordingly. This patch takes care of doing this. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-15omap5: Add minimal support for omap5430.Sricharan
This patch adds the minimal support for OMAP5. The platform and machine specific headers and sources updated for OMAP5430. OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Also moved some part of code from the basic platform support that can be made common for OMAP4/5. Rest is kept out seperately. The same approach is followed for clocks and emif support in the subsequent patches. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-15PXA: vpac270: Enable the new generic MMC driverMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-11-15PXA: Drop csb226 and innokom boards (unmaintained)Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Robert Schwebel <robert@schwebel.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-11-11powerpc/83xx: fix sdram initialization for keymile boardsAndreas Huber
commit b11f53f3 (keymile: Fix Coding style issues for keymile boards) introduces a bug according the SDRAM initialization for all km83xx boards. im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; was replaced with out_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); and this is wrong, because this overwrites the intial value CONFIG_SYS_DDR_SDRAM_CFG. Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
generated by cgit (git 2.34.1) at 2024-12-28 13:15:58 +0000