summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2020-01-21ARM: mvebu: clearfog: read basic TLV dataBaruch Siach
Read RAM die capacity from the EEPROM TLV. Follow the ONIE standard that defines the Vendor Extension entry type for vendor specific data. We have no Private Enterprise Number at the moment as the standard requires. Use the dummy all 0xff value for now. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-21Merge tag 'u-boot-imx-20200121' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------- imx8: cleanup, fix warnings imx6ull: add VisionSOM SoM and EVK mx7ulp: fix warning due network, cleanup mx7dsabre: Fix dm probe pmic imx6: fixed for vining2000 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
2020-01-21arm: mvebu: clearfog: enable both DDR clocksBaruch Siach
Enabled both DDR clock signals to support Clearfog variants (currently, Clearfog GTR) that need both clocks. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-20Merge tag '2020-01-20-ti-2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti K3 J721E: * DMA support. * MMC and ADMA support. * EEPROM support. * J721e High Security EVM support. * USB DT nodes K3 AM654: * Fixed boot due to pmic probe error. * USB support and DT nodes. * ADMA support DRA7xx/AM57xx: * BBAI board support * Clean up of net platform code under board/ti AM33/AM43/Davinci: * Reduce SPL size for omap3 boards. * SPL DT support for da850-lcdk * PLL divider fix for AM335x
2020-01-20Merge tag 'u-boot-stm32-20200117' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - stm32mp1: split SOC and board and cleanup config
2020-01-20colibri-imx8x: Remove unused function detail_board_ddr_info()Alifer Moraes
detail_board_ddr_info() is not used anywhere, so simply remove it. This function is only used by Layerscape, not by i.MX. This was detected by the following sparse warning: board/toradex/colibri-imx8x/colibri-imx8x.c:104:6: warning: no previous prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20apalis-imx8: Remove unused function detail_board_ddr_info()Alifer Moraes
detail_board_ddr_info() is not used anywhere, so simply remove it. This function is only used by Layerscape, not by i.MX. This was detected by the following sparse warning: board/toradex/apalis-imx8/apalis-imx8.c:92:6: warning: no previous prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx8qxp_mek: Remove unused function detail_board_ddr_info()Alifer Moraes
detail_board_ddr_info() is not used anywhere, so simply remove it. This function is only used by Layerscape, not by i.MX. This was detected by the following sparse warning: board/freescale/imx8qxp_mek/imx8qxp_mek.c:115:6: warning: no previous prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx8qm_mek: Remove unused function detail_board_ddr_info()Alifer Moraes
detail_board_ddr_info() is not used anywhere, so simply remove it. This function is only used by Layerscape, not by i.MX. This was detected by the following sparse warning: board/freescale/imx8qm_mek/imx8qm_mek.c:102:6: warning: no previous prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes]
2020-01-20imx8qm_rom7720_a1: Remove unused function detail_board_ddr_info()Alifer Moraes
detail_board_ddr_info() is not used anywhere, so simply remove it. This function is only used by Layerscape, not by i.MX. This was detected by the following sparse warning: board/advantech/imx8qm_rom7720_a1/imx8qm_rom7720_a1.c:110:6: warning: no previous prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-01-20imx8qm_mek: Include fdt_support.h headerAlifer Moraes
Include fdt_support.h header file to fix the following sparse warning: board/freescale/imx8qm_mek/imx8qm_mek.c:116:5: warning: no previous prototype for ‘ft_board_setup’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx8qxp_mek: Include fdt_support.h headerAlifer Moraes
Include fdt_support.h header file to fix the following sparse warning: board/freescale/imx8qxp_mek/imx8qxp_mek.c:129:5: warning: no previous prototype for ‘ft_board_setup’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20mx8mm_evk: spl: Staticize functionsAlifer Moraes
Functions spl_dram_init() and power_init_board() are used only in the scope of this file, so make them static to fix the following sparse warnings: board/freescale/imx8mm_evk/spl.c:40:6: warning: no previous prototype for ‘spl_dram_init’ [-Wmissing-prototypes] board/freescale/imx8mm_evk/spl.c:85:5: warning: no previous prototype for ‘power_init_board’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx8mm_evk: Include sys_proto.h headerAlifer Moraes
Add sys_proto.h header file to fix the following sparse warning: board/freescale/imx8mm_evk/imx8mm_evk.c:59:5: warning: no previous prototype for ‘board_mmc_get_env_dev’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx: imx8mm_evk: remove hdmi fw info from READMEFlavio Suligoi
The imx8mm doesn't require the hdmi firmware. Update also the fw version. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-20mx7dsabre: Fix dm probe pmicJoris Offouga
With commit 0d52bab4621 ("mx7dsabre: Enable DM_ETH") Device Tree has been update and change pfuze3000 node Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVKArkadiusz Karas
Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port. Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200Marek Vasut
The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20ARM: imx: vining2000: Clean up uSDHC4 setupMarek Vasut
Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-20arm: mach-k3: Warn when node to disable is not foundAndrew F. Davis
Not finding a node that we try to disable does not always need to be fatal to boot but should at least print out a warning. Return error from fdt_disable_node as it did fail to disable the node, but only warn in the case of disabling the TRNG as this will not prevent boot. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: j721e: Print board name and version during bootLokesh Vutla
Print the board name and ver along with the DT Model. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: j721e: Use EEPROM-based board detectionAndreas Dannenberg
The TI J721E EVM system on module (SOM), the common processor board, and the associated daughtercards have on-board I2C-based EEPROMs containing board config data. Use the board detection infrastructure to do the following: 1) Parse the J721E SOM EEPROM and populate items like board name, board HW and SW revision as well as board serial number into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing associated I2C addresses used for on-board EEPROMs containing daughter card-specific data. If such a card is found, parse the EEPROM data such as for additional Ethernet MAC addresses and populate those into U-Boot accordingly 3) Dynamically apply daughter card DTB overlays to the U-Boot (proper) DTB during SPL execution 4) Dynamically create an U-Boot ENV variable called name_overlays during U-Boot execution containing a list of daugherboard-specific DTB overlays based on daughercards found to be used during Kernel boot. This patch adds support for the J721E system on module boards containing the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS), the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet Expansion Board ("J7X-VSC8514-ETH"), the infotainment board ("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial expansion board ("J7X-GESI-EXP"). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20ti: common: board_detect: Handle EEPROM probe more gracefullyAndreas Dannenberg
Use dm_i2c_probe() rather than i2c_get_chip() when trying to access board-detection EEPROM devices. This has the advantage of more gracefully handling the case when the EEPROM is not present by allowing to exit the function early rather than failing and outputting an error message on the I2C transactions that follow. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: beagleboneai: add initial supportCaleb Robey
These are necessities for beaglebone ai boot. There is the addition of CONFIG_SUPPORT_EMMC_CONFIG to the Kconfig file. This is present upstream but not in 19.01 yet. Signed-off-by: Jason Kridner <jdk@ti.com> Signed-off-by: Caleb Robey <c-robey@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: beagleboneai: IODELAY and pinmuxCaleb Robey
This patch configures the pinmux settings for the BeagleBone AI after the emmc read has completed. Signed-off-by: Jason Kridner <jdk@ti.com> Signed-off-by: Caleb Robey <c-robey@ti.com> Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: beagleboneai: emmc read changesCaleb Robey
BeagleBoard.org BeagleBone AI rev A1 does not include a board identifier I2C EEPROM due to a design oversight. These boards have been put into production and are generally available now. The board identifier information, however, has been included in the second eMMC linear boot partition (/dev/mmcblk1boot1). This patch works by: * First, looking for a board identifier I2C EEPROM and if not found, * Then seeing if the boot mode matches BeagleBone AI with eMMC in the boot chain to make sure we don't enable eMMC pinmuxes on boards that don't support it, and * Finally, initializes the eMMC pins and reading the header. Signed-off-by: Jason Kridner <jdk@ti.com> Signed-off-by: Caleb Robey <c-robey@ti.com> Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: am43xx: remove net platform codeGrygorii Strashko
The TI AM43xx platform has DM_ETH and OF_CONTROL enabled, so remove networking platform code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: dra7-evm: remove net platform codeGrygorii Strashko
The DRA7 has DM_ETH and OF_CONTROL enabled, so remove networking platform code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-17common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17common: Move testdram() into init.hSimon Glass
This function is called during init so move it to the init header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move RAM-sizing functions to init.hSimon Glass
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move reset_cpu() to the CPU headerSimon Glass
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move get_tbclk() to time.hSimon Glass
This function related to timer and most of the timer functions are in time.h, so move this function there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move clock functions into a new fileSimon Glass
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move upmconfig() to ppc.hSimon Glass
This file is only used by PowerPC so move it to an arch-specific header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move device-tree setup functions to fdt_support.hSimon Glass
These functions relate to setting up the device tree for booting the OS. The fdt_support.h header file supports similar functions, so move these there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move reset_phy() to net.hSimon Glass
This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move relocate_code() to init.hSimon Glass
This is an init function so move it out of the common header. Avoid using the typedef so that we don't have to include the global_data header file. Also tidy up the function style in comments while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move functions for loading from fat/ext2 to fs.hSimon Glass
These are filesystem functions and belong in the filesystem header file. Move them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17stm32mp1: split board and SOC support for STM32MP15x familyPatrick Delaunay
Split the board and SOC support for STM32MP15x family and prepare the introduction of new boards with STM32MP15x. This path define the 2 configurations: - STM32MP15x: STM32MP15x soc support (new) - TARGET_ST_STM32MP15x: STMicroelectronics board support (choice) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-17board: stm32mp1: move CONFIG_ENV_XXX in defconfigPatrick Delaunay
Move CONFIG_ENV_SECT_SIZE and CONFIG_ENV_OFFSET in stm32mp15_*_defconfig for ST board with NOR support (STM32MP15xx-EV1 boards) - CONFIG_SECT_SIZE values = the max supported NOR erase size (256KB) - CONFIG_ENV_OFFSET = offset for NOR (ENV_IS_IN_SPI_FLASH) This Patch prepares the U-Boot support of boards with STM32MP15x SOC not provided by STMicroelectronics. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-17stm32mp1: move stboard command in board/st/common directoryPatrick Delaunay
Move the ST command in board/st/common, as this command is only used by ST board. Prepare the support in U-Boot of boards with STM32MP15x SOC but not STMicroelectronics. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Clearfog: Fix SD booting (Baruch) - Misc updates to MMC handling in SPL to support booting from main data partition (vs hardware boot partition) on MVEBU (Baruch)
2020-01-16Merge tag 'xilinx-for-v2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.04 ARM64: - Add INIT_SPL_RELATIVE dependency SPL: - FIT image fix - Enable customization of bl2_plat_get_bl31_params() Pytest: - Add test for octal/hex conversions Microblaze: - Fix manual relocation for one SPI instance Nand: - Convert zynq/zynqmp drivers to DM Xilinx: - Enable boot script location via Kconfig - Support OF_SEPARATE in board FDT selection - Remove low level uart setup it is done later by code - Add support for DEVICE_TREE variable passing for SPL Zynq: - Enable jtag boot mode via distro boot - Removing unused baseaddresses from hardware.h - DT fixups ZynqMP: - Fix emmc boot sequence - Simplify spl logic around bss and board_init_r() - Support psu_post_config_data() calling - Tune mini-nand DTS - Fix psu wiring for a2197 boards - Add runtime MMC device boot order filling in spl - Clear ATF handoff handling with custom bl2_plat_get_bl31_params() - Add support u-boot.its generation - Use single image configuration for all platforms - Enable PANIC_HANG via Kconfig - DT fixups - Firmware fixes - Add support for zcu208 and zcu1285 Versal: - Fix emmc boot sequence - Enable board_late_init() by default
2020-01-16Add support for MT7622 reference boardSam Shih
This adds a general board file based on MT7622 SoCs from MediaTek. This commit is adding the basic boot support for the MT7622 rfb. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-01-16ARM: MediaTek: add basic support for MT8512 boardsmingming lee
This adds a general board file based on MT8512 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8512 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16arm: mvebu: clearfog: update eMMC documentationBaruch Siach
SPL now automatically selects the correct U-Boot image offset for both eMMC and SD card. No need to tweak CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-14imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVKGiulio Benetti
This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14pico-imx7d: Convert to DM_ETHJoris Offouga
Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-14mx6ul_14x14_evk: Fix SPL boot hangFabio Estevam
Currently the following SPL hang is observed: U-Boot SPL 2020.01-rc5-00079-g797eee36a1 (Jan 06 2020 - 11:24:09 -0300) Trying to boot from MMC1 Card did not respond to voltage select! spl: mmc init failed with error: -95 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### Fix it by moving the eSDHC2 initialization to SPL. While at it, since this board uses DM_MMC all the esdhc board code can be removed to make the code simpler. Signed-off-by: Fabio Estevam <festevam@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-07 11:10:27 +0000