uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2012-09-01	arm:at91-boards: remove console_init_f where unnecessary	Andreas Bießmann
2012-09-01	at91sam9263ek: remove unnecessary console_init_f	Andreas Bießmann
2012-09-01	arm : at91sam9x5 : fix a small bug for NAND	Bo Shen
2012-09-01	fsl_esdhc: Remove cache snooping for i.MX	Benoît Thébaudeau
2012-09-01	MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR	Stefano Babic
2012-09-01	mx5:Use IMX_GPIO_NR macro	Ashok Kumar Reddy
2012-09-01	efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's prod...	Matt Sealey
2012-09-01	efikamx: update to Efika MX Smarttop and Smartbook boards	Matt Sealey
2012-09-01	efikamx: configure Smarttop PCBID and LED pads in DCD for convenience	Matt Sealey
2012-09-01	efikamx: remove drive strength function and roll its functionality into the DCD	Matt Sealey
2012-09-01	efikamx: move and rename Efika MX directories and config files to prepare for...	Matt Sealey
2012-09-01	MX28: m28evk: Align SSP clock speed	Marek Vasut
2012-09-01	mx6qarm2:Use IMX_GPIO_NR macro	Ashok Kumar Reddy
2012-09-01	imx27lite: update with gpio api change (v4)	trem
2012-09-01	mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'	Otavio Salvador
2012-09-01	mx53ard: Use IMX_GPIO_NR macro	Fabio Estevam
2012-09-01	mx51evk: Use IMX_GPIO_NR macro	Fabio Estevam
2012-09-01	mx53loco: Use IMX_GPIO_NR macro	Fabio Estevam
2012-09-01	mx35: Fix broken pin definitions	Benoît Thébaudeau
2012-09-01	MX: Set a common gpio.h for all i.MX	Stefano Babic
2012-09-01	mx53evk: add boot_mode support	Troy Kisky
2012-09-01	mx6qsabrelite: add boot_mode support	Troy Kisky
2012-09-01	iomux: move IOMUX_GPR13_xxx defines	Troy Kisky
2012-09-01	mx35: Fix typo on EDIO	Benoît Thébaudeau
2012-09-01	tx25: Use generic gpio_* calls	Vikram Narayanan
2012-09-01	mxs: Convert sys_proto.h prefixes to 'mxs'	Otavio Salvador
2012-09-01	SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0	Rajeshwari Shinde
2012-09-01	Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0	Rajeshwari Shinde
2012-09-01	EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0	Rajeshwari Shinde
2012-09-01	SMDK5250: Add smdk5250-uboot-spl.lds	Rajeshwari Shinde
2012-09-01	SMDK5250: SPL: Define parametric board initializer	Rajeshwari Shinde
2012-09-01	tegra20: move SDRAM param save to later in boot	Allen Martin
2012-09-01	tegra20: remove timer_init from SPL build	Allen Martin
2012-09-01	tegra20: make board mkdir commands unconditional	Allen Martin
2012-09-01	tegra20: rename tegra2 -> tegra20	Allen Martin
2012-09-01	ARM: add Raspberry Pi model B board, using BCM2835 SoC	Stephen Warren
2012-09-01	u8500: Separating mmc config parameters from driver	John Rigby
2012-09-01	u8500: Enabling power to MMC device on AB8500 V2	Mathieu J. Poirier
2012-09-01	u8500: Moving processor-specific functions to cpu area.	Mathieu J. Poirier
2012-09-01	snowball: applying power to LAN and GBF controllers	Mathieu J. Poirier
2012-09-01	snowball: Adding architecture dependent initialisation	Mathieu J. Poirier
2012-09-01	u8500: Moving prcmu to cpu directory	Mathieu J. Poirier
2012-09-01	snowball: Add support for ux500 based snowball board	Mathieu J. Poirier
2012-09-01	davinci: enbw_cmc: change switch init behaviour	Heiko Schocher
2012-09-01	da8xx/hawkboard: Add support for ohci host controller	Sughosh Ganu
2012-09-01	am335x evm: Enable support for spi0	Tom Rini
2012-09-01	am335x evm: Enable MMC1 pinmux	Tom Rini
2012-09-01	am335x evm: Initial support for AM335x GP EVM Profiles	Tom Rini
2012-09-01	sc_sps_1: Adjust board config to use 'mxs' SoC code	Otavio Salvador
2012-09-01	MX28: Add SchulerControl SC_SPS_1 platform	Marek Vasut