summaryrefslogtreecommitdiff
path: root/doc/board
AgeCommit message (Collapse)Author
2020-04-24doc: boards: add Cubieboard7 documentationAmit Singh Tomar
This adds build and flash steps for Actions S700 based Cubieboard7 board. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 boardMarek Vasut
The AV96 is in fact an assembly of DH Electronics DHCOR SoM on top of an AV96 reference board. Split the DTs to reflect that and make sure to DHCOR SoM can be reused on other boards easily. It is also highly recommended to configure the board for the DHCOM make stm32mp15_dhcom_basic_defconfig make DEVICE_TREE=stm32mp15xx-dhcor-avenger96 as that permits reusing the board code for the DH components, like accessing and reading out the ethernet MAC from EEPROM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Change-Id: I7db47280d4eb0d668eb4e006355240271154f97f
2020-04-23riscv: qemu: Remove the simple-bus driver for the SoC nodeBin Meng
Prior to QEMU v3.1.0, QEMU generated the 'virt' SoC node with a "riscv-virtio-soc" compatible string, and a "simple-bus" driver was created to accommodate that special case in U-Boot. Starting from QEMU v3.1.0, the SoC node was set as a "simple-bus", hence the special simple-bus driver is no longer needed. Update the doc to mention the latest tested QEMU version 4.2.0. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-17image: Add compressed Image parsing support in booti.Atish Patra
Add compressed Image parsing support so that booti can parse both flat and compressed Image to boot Linux. Currently, it is difficult to calculate a safe address for every board where the compressed image can be decompressed. It is also not possible to figure out the size of the compressed file as well. Thus, user need to set two additional environment variables kernel_comp_addr_r and filesize to make this work. Following compression methods are supported for now. lzma, lzo, bzip2, gzip. lz4 support is not added as ARM64 kernel generates a lz4 compressed image with legacy header which U-Boot doesn't know how to parse and decompress. Tested on HiFive Unleashed and Qemu for RISC-V. Tested on Qemu for ARM64. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix minor rST formatting problems] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-13Merge branch 'next'Tom Rini
Pull in changes that have been pending in our 'next' branch. This includes: - A large number of CI improvements including moving to gcc-9.2 for all platforms. - amlogic, xilinx, stm32, TI SoC updates - USB and i2c subsystem updtaes - Re-sync Kbuild/etc logic with v4.19 of the Linux kernel. - RSA key handling improvements
2020-04-09doc: board: qemu-mips.rst: fix code examplesHeinrich Schuchardt
Code sections should be syntax highlighted as bash. Comment lines in code should start with a hash sign ('#') but code lines should not. Most commands can be executed as normal users. Prepend those commands requiring elevated authorization with 'sudo'. dd does not have a parameter cout. sfdisk does not have a -C parameter on Debian Buster. Provide the necessary input to sfdisk. Creating a partition of length zero makes no sense. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-07Merge tag 'xilinx-for-v2020.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.07 common: - Align ENV_FAT_INTERFACE - Fix MAC address source print log - Improve based autodetection code xilinx: - Enable netconsole Microblaze: - Setup default ENV_OFFSET/ENV_SECT_SIZE Zynq: - Multiple DT updates/fixes - Use DEVICE_TREE environment variable for DTB selection - Switch to single zynq configuration - Enable NOR flash via DM - Minor SPL print removal - Enable i2c mux driver ZynqMP: - Print multiboot register - Enable cache commands in mini mtest - Multiple DT updates/fixes - Fix firmware probing when driver is not enabled - Specify 3rd backup RAM boot mode in SPL - Add SPL support for zcu102 v1.1 and zcu111 revA - Redesign debug uart enabling and psu_init delay - Enable full u-boot run from EL3 - Enable u-boot.itb generation without ATF with U-Boot in EL3 Versal: - Enable distro default - Enable others SPI flashes - Enable systems without DDR Drivers: - Gem: - Flush memory after freeing - Handle mdio bus separately - Watchdog: - Get rid of unused global data pointer - Enable window watchdog timer - Serial: - Change reinitialization logic in zynq serial driver Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-06ARM: zynq: Switch to single zynq configurationsMichal Simek
There are a lot of zynq configurations which can be merged together and use only one for all. The similar change has been done for ZynqMP by commit be1b6c32d940 ("arm64: zynqmp: Use zynqmp_virt platform") Build SPL with u-boot.img for zc706 like this. export DEVICE_TREE=zynq-zc706 && make xilinx_zynq_virt_defconfig && make -j8 u-boot.img is generic for all boards. Tested on Zybo, zc702, zc706, zc770-xm011-x16, cc108 and microzed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-04doc: board: verdin-imx8mm: use mainline TF-AIgor Opaniuk
1. Update build steps where mainline Trusted Firmware A is used. 2. Fix BL31_BASE to the proper one according to the SoC reference manual. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-24stm32mp1: add 800 MHz profile supportPatrick Delaunay
The STM32MP1 series is available in 3 different lines which are pin-to-pin compatible: - STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz, 3D GPU, DSI display interface and CAN FD - STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz and CAN FD - STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz Each line comes with a security option (cryptography & secure boot) & a Cortex-A frequency option : - A : Cortex-A7 @ 650 MHz - C : Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz - D : Cortex-A7 @ 800 MHz - F : Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz This patch adds the support of STM32MP15xD and STM32MP15xF in U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24arm: stm32mp: bsec: add permanent lock support in bsec driverPatrick Delaunay
Add BSEC lock access (read / write) at 0xC0000000 offset of misc driver. The write access only available for Trusted boot mode, based on new SMC STM32_SMC_WRLOCK_OTP. With the fuse command, the permanent lock status is accessed with 0x10000000 offset (0xC0000000 - 0x8000000 for OTP sense/program divided by u32 size), for example: Read lock status of fuse 57 (0x39) STM32MP> fuse sense 0 0x10000039 1 Sensing bank 0: Word 0x10000039: 00000000 Set permanent lock of fuse 57 (0x39) STM32MP> fuse prog 0 0x10000039 1 Sensing bank 0: Word 0x10000039: 00000000 WARNING: the OTP lock is updated only after reboot WARING: Programming lock or fuses is an irreversible operation! This may brick your system. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-05doc: Chromebook Coral: Fix typo for "Top of CAR region"Wolfgang Wallner
The value for "Top of CAR region" should be fefc0000, not fefc000. This matches the Kconfig default values, as SYS_CAR_ADDR and SYS_CAR_SIZE are 0xfef00000 and 0xc0000 respectively. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05doc: board: colibri-imx8x: convert readme to reSTIgor Opaniuk
Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05doc: board: apalis-imx8: convert readme to reSTIgor Opaniuk
Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05doc: board: verdin-imx8mm: convert readme to reSTIgor Opaniuk
Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: spell out U-Boot correctly] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05doc: board: toradex: add colibri_imx7.rstIgor Opaniuk
- add initial index for toradex boards reST documentation - add initial colibri_imx7.rst doc file which provides all needed information for obtaining a workable image ready for flashing for both eMMC/NAND versions of Colibri iMX7. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: make title underline the same length as the title itself] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-02doc: add board documentation for stm32mp1Patrick Delaunay
Change plain test README to rst format and move this file in documentation directory. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13doc: board: add Rockchip to doc/board/index.rstHeinrich Schuchardt
Fix a build error checking consistency... /doc/board/rockchip/index.rst: WARNING: document isn't included in any toctree Fixes: 338b86c9b305 ("doc: boards: Add rockchip documentation") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-10Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Move P2SB from Apollo Lake to a more generic location - Add a function to find a device by drvdata in DM core - Enhancement of DM IRQ uclass driver - Add a clock driver for Intel devices - Add support for ACPI general-purpose events - Add a TPM driver for H1/Cr50 - Enable TPM on Google Chromebook Coral
2020-02-10doc: fix opensbi build steps for AX25-AE350Jagan Teki
OpenSBI build steps are marked as normal text in AX25-AE350 documentation. Move them into code-block so-that it can show it as build steps. Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-10doc: fix AX25-AE350 RISC-V documentationHeinrich Schuchardt
Since commit 04883bf7acca ("doc: update AX25-AE350 RISC-V documentation") `make htmldocs` produces a log of warnings like doc/board/AndesTech/ax25-ae350.rst:373: WARNING: Block quote ends without a blank line; unexpected unindent. doc/board/AndesTech/ax25-ae350.rst:0: WARNING: Undefined substitution referenced: "_ __ ___ _ __ | (___ | |_) |". Reformat the problematic passages. Fixes: 04883bf7acca ("doc: update AX25-AE350 RISC-V documentation") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: coral: Update i2c and rtc statusSimon Glass
These are actually working correctly, so update the status. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-04doc: Chromebook Coral: fix build warningsHeinrich Schuchardt
Use valid restructured text to avoid warnings like WARNING: Title underline too short. WARNING: Block quote ends without a blank line; unexpected unindent. when building with `make htmldocs`. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-04doc: intel: Update serial driver changes in slimbootloader.rstPark, Aiden
Now, Slim Bootloader uses NS16550_DYNAMIC to support serial port configuration at runtime, so no more code change is required. Therefore, remove unnecessary steps and fix minor typo. Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-30doc: boards: Add rockchip documentationJagan Teki
Rockchip has documentation file, doc/README.rockchip but which is not so readable to add or understand the existing contents. Even the format that support is legacy readme in U-Boot. Add rockchip specific documentation file using new rst format, which describes the information about Rockchip supported boards and it's usage steps. Added minimal information about rk3288, rk3328, rk3368 and rk3399 boards and usage. This would indeed updated further based on the requirements and updates. Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-15x86: Add chromebook_coralSimon Glass
Add support for coral which is a range of Apollo Lake-based Chromebook released in 2017. This also includes reef released in 2016, since it is based on the same SoC. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-10doc: update AX25-AE350 RISC-V documentationRick Chen
Add descriptions about U-Boot SPL feature and how to build and run. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-10Use dts support from U-Boot via OF_SEPARATE instead of depending from opensbi.Rick Chen
This would help to make the necessary changes in drivers and device trees in U-Boot tree itself. This feature would also be helpful to not pass dtb during opensbi builds. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Rick Chen <rick@andestech.com>
2019-10-08doc: README.xilinx: Add dt bindingsT Karthik Reddy
Devicetree bindings are already specified in Linux kernel documentation. Instead of maintaining same dt bindings in U-Boot doc specify path to dt bindings in Linux kernel & documenting specific changes that are in U-Boot. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10doc: slimbootloader: Update Linux booting steps on QEMUPark, Aiden
Add steps to test Linux booting on QEMU with Yocto image. Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-26doc: update QEMU RISC-V documentationLukas Auer
The available defconfigs for RISC-V QEMU have changed. We now have configurations to compile U-Boot to run in supervisor mode and for U-Boot SPL. Update the QEMU RISC-V documentation to reflect these changes. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-18doc: formatting slimbootloader.rstHeinrich Schuchardt
Avoid a warning when building the 'make htmldocs' target: doc/board/intel/slimbootloader.rst:90: WARNING: Title underline too short. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-15doc: sifive-fu540: Update README to explicitly load DTB for LinuxAnup Patel
We should explicitly load DTB from TFTP server or MMC/SD card for Linux booting. This will allow us: 1. To use different Linux DTB for SiFive Unleashed board with expansion board connected. 2. Avoid re-flashing OpenSBI firmware whenever board connections change. This patch updates reference bootlog in SiFive FU540 README as-per above. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-09board: intel: Add new slimbootloader boardPark, Aiden
Add slimbootloader board to run U-boot as a Slim Bootloader payload - Add new board/intel/slimbootloader directory with minimum codes - Add slimbootloader configuration files - Add doc/board/intel/slimbootloader.rst Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: add slimbootloader board MAINTAINERS file] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09qemu-x86: Use config_distro_bootcmdJoshua Watt
Converts qemu x86 machines to boot using distro_config. The intent is to allow u-boot in qemu to be maximally compatible with many boot methods without having to change the config. Previously, u-boot would only boot in a very limited set of circumstances where there was a /boot/vmlinuz on scsi 0:3 with no ramdisk. Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: convert doc updates to reST] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-29doc: board: Add missing board index.rst filesBin Meng
These board index.rst files are missing in previous html doc patch series, hence it causes some build warnings. Add those files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-24doc: board: Convert README.zynq to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.b4860qds to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.at91 to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.sh7753evb to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.sh7752evb to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.sifive-fu540 to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.ag101p to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Add AndesTech ax25-ae350 board docBin Meng
This converts README.AX25 and README.ae350 plain text documentation to reST format, merges them into one ax25-ae350 doc, and adds it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.qemu-mips to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.qemu-riscv to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.qemu-arm to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Add QEMU x86 board docBin Meng
This extracts QEMU x86 board specific information from README.x86, converts plain text documentation to reST format and adds it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Add coreboot board docBin Meng
This extracts coreboot board specific information from README.x86, converts plain text documentation to reST format and adds it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Add Google Chromebook Samus board docBin Meng
This extracts Google Chromebook Samus board specific information from README.x86, converts plain text documentation to reST format and adds it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-29 17:26:15 +0000