summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)Author
2019-08-10Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DaVinci USB updates - Various OHCI fixes - Gadget fixes
2019-08-09Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Enable SD slot on Intel Edison - Populate CSRT ACPI table for shared DMA controller on Intel Tangier - Convert Intel ICH-SPI driver to use new spi-mem ops - Enable config_distro_bootcmd for QEMU x86 - Support U-Boot as a payload for Intel Slim Bootloader - Avoid writing temporary asl files into the source tree which fixes the parallel build issue occasionally seen
2019-08-09sound: Add codec enable to the sound bindingsSimon Glass
For U-Boot we allow a GPIO to be specified to enable the codec. Add this to the relevant binding files. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09sound: tegra: Add the binding file for tegra-audioSimon Glass
This file was missed when adding the sound driver to U-Boot. Bring it in from Linux 5.0. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09sound: snow: Add the binding file for snowSimon Glass
This file was missed when adding the sound driver to U-Boot. Bring it in from Linux 5.0. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09board: intel: Add new slimbootloader boardPark, Aiden
Add slimbootloader board to run U-boot as a Slim Bootloader payload - Add new board/intel/slimbootloader directory with minimum codes - Add slimbootloader configuration files - Add doc/board/intel/slimbootloader.rst Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: add slimbootloader board MAINTAINERS file] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09qemu-x86: Use config_distro_bootcmdJoshua Watt
Converts qemu x86 machines to boot using distro_config. The intent is to allow u-boot in qemu to be maximally compatible with many boot methods without having to change the config. Previously, u-boot would only boot in a very limited set of circumstances where there was a /boot/vmlinuz on scsi 0:3 with no ramdisk. Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: convert doc updates to reST] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09Merge tag 'u-boot-rockchip-20190809' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add rk3399 boards Khadas Edge/-V/-Captain - Add fully souce code support for rk3328 including TPL/DRAM init - Enable boot from eMMC for rk3399 rock960/ficus boards - turn on the IO supply for dw_mmc
2019-08-08fastboot: Remove "bootloader-version" variableSam Protsenko
As per [1], there is no such fastboot variable as "bootloader-version". Only "version-bootloader" is supported. Let's reflect this and not confuse users further. [1] https://android.googlesource.com/platform/system/core/+/refs/tags/android-q-preview-4/fastboot/README.md Fixes: 3aab70afc531d1 ("usb/gadget: add the fastboot gadget") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-08-05doc: rockchip: Adapt Pine64 Rock64 board instructionsMatwey V. Kornilov
Now we have our own TPL implementation. Remove obsolete notes. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-04Merge tag 'efi-2019-10-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc2 With this pull request a workaround for GRUB on 32bit ARM is re-enabled and made customizable. Without the patch booting on ARM 32bit with GRUB prior to version 2.04 or with a cache which is not managed via CP15 fails. Further work will be needed to achieve a UEFI compliant cache handling. According to the UEFI spec all caches except those that cannot be managed via CP15 should be enabled. An implementation of the ConvertPointer() runtime service is provided. efi_crt0 is always rebuild to avoid having to call 'make mrproper' when switching architectures.
2019-08-02autoboot: Rename CONFIG_MENU_SHOW to include AUTOBOOTSimon Glass
Rename this option to CONFIG_AUTOBOOT_MENU_SHOW this it relates to the autoboot functionality. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02autoboot: Rename CONFIG_MENUKEY to CONFIG_AUTOBOOT_MENUKEYSimon Glass
Since this is part of the autoboot functionality, it makes sense to name it with an AUTOBOOT prefix. No mainline boards use it so this should be safe, and downstream boards will need to adjust. Since this option is just an integer value, it really needs another option to control whether the feature is enabled or not. Add a new CONFIG_USE_AUTOBOOT_MENUKEY for that. This fits better with how things are done with Kconfig, avoiding the need to use a specific value to disable the feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02autoboot: Improve docs for CONFIG_AUTOBOOT_ENCRYPTIONSimon Glass
This option is not documented properly at present. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-30doc: integrate UEFI documentation into Sphinx toctreeHeinrich Schuchardt
Change the UEFI documentation to Sphinx style and integrate it into the rest of the Sphinx generated documentation. Remove the inaccurate TODO list in doc/uefi/uefi.rst. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-29gpio: fixes for gpio-hog supportHeiko Schocher
recently added gpio hog patch was "in discussion" state with Simon Glass. This patch now adds most of comments from Simon Glass. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29doc: arch: sandbox: Replace all the instances of README.sandboxKeerthy
commit 49116e6d236d ("doc: arch: Convert README.sandbox to reST") Moves README.sandbox to doc/arch. Replace all the existing instances to point to the right documentation file. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-07-29doc: board: Add missing board index.rst filesBin Meng
These board index.rst files are missing in previous html doc patch series, hence it causes some build warnings. Add those files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-29fit: Support compat string property in configuration nodeJulius Werner
This patch adds support for an optional optimization to compatible string matching where the compatible string property from the root node of the kernel FDT can be copied into the configuration node of the FIT image. This is most useful when using compressed FDTs or when using FDT overlays, where the traditional extraction of the compatible string from the kernel FDT itself is not easily possible. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-27Merge branch '2019-07-26-ti-imports'Tom Rini
- Bring in the rest of the J271E platform - Various OMAP3/AM3517, DA850 fixes
2019-07-27Merge tag 'u-boot-imx-20190719' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20190719 - CCF for i.MX6 - nandbcb command to write SPL into NAND - Switch to DM (i.MX28) - Boards: Toradex, engicam, DH - Fixes for i.MX8 - Fixes for i.MX7ULP Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-26dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared accessLokesh Vutla
TISCI protocol supports for enabling the device either with exclusive permissions for the requesting host or with sharing across the hosts. There are certain devices which are exclusive to Linux context and there are certain devices that are shared across different host contexts. So add support for getting this information from DT by increasing the power-domain cells to 2. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-25net: tsec: Change compatible strings to match LinuxVladimir Oltean
In the case of the tsec network driver, so far there has been no mainline user of DM_ETH where the DT bindings get used. In the case of the mdio bus, it looks like the "fsl,tsec-mdio" string was made up for the documentation, but there is no mainline code that parses the "compatible" property anyway. In both cases, there are no DT blobs that contain the old strings. So change the documentation to "fsl,etsec2" for the Ethernet ports and "fsl,etsec2-mdio" for the MDIO buses, which are strings that Linux also uses, at least for LS1021A. More compatible strings can be added once other (PowerPC) SoCs are migrated to DM_ETH. The current ls1021a.dtsi doesn't match what was documented for the MDIO buses anyway (the "compatible" is "gianfar" currently). This will be fixed in the next patch. Fixes: 69a00875e3db ("doc: dt-bindings: Describe Freescale TSEC ethernet controller") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25doc: bindings: Add binding for register driven MDIO muxesAlex Marginean
This binding documents two properties that describe the registers used to perform MUX selection. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24Merge branch '2019-07-24-master-imports'Tom Rini
- Various Android related changes including A/B update and BCB updates - Assorted minor fixes
2019-07-24doc: fitImage: Cosmetics break linesMickaël Tansorier
Add missing newline before title and subtitle. Signed-off-by: Mickaël Tansorier <mickael.tansorier@smile.fr>
2019-07-24doc: fitImage: Fix conf number incrementationMickaël Tansorier
Increment conf id to avoid to have two same conf name into one configuration description. Signed-off-by: Mickaël Tansorier <mickael.tansorier@smile.fr>
2019-07-24doc: Add the U-Boot logo to the html docBin Meng
Now we have a logo for U-Boot, we can include it in the Sphinx html doc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: Add .gitignore for the Sphinx build output directoryBin Meng
With Sphinx documentation moving from Documentation directory to doc directory, we missed updating .gitignore for the Sphinx build output directory. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: Cope with Sphinx logging deprecationsJonathan Corbet
Recent versions of sphinx will emit messages like: doc/sphinx/kerneldoc.py:103: RemovedInSphinx20Warning: app.warning() is now deprecated. Use sphinx.util.logging instead. Switch to sphinx.util.logging to make this unsightly message go away. Alas, that interface was only added in version 1.6, so we have to add a version check to keep things working with older sphinxes. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Rebased for U-Boot Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-24doc: android: Add simple guide for A/B updatesRuslan Trofymenko
Add a short documentation for A/B enablement and 'ab_select' command usage. Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Alistair Strachan <astrachan@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-24doc: Remove README.blackfinBin Meng
U-Boot no longer supports blackfin architecture. Remove the doc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: arch: Convert README.xtensa to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: arch: Convert README.sandbox to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: arch: Convert README.sh to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: arch: Convert README.m68k to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: arch: Convert README.ARC to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: arch: Convert README.nios2 to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: arch: Convert README.NDS32 to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. This also merges README.N1213 contents into the new nds32.rst file. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: arch: Convert README.arm64 to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: arch: Convert README.x86 to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.zynq to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.b4860qds to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.at91 to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.sh7753evb to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.sh7752evb to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.sifive-fu540 to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.ag101p to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Add AndesTech ax25-ae350 board docBin Meng
This converts README.AX25 and README.ae350 plain text documentation to reST format, merges them into one ax25-ae350 doc, and adds it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24doc: board: Convert README.qemu-mips to reSTBin Meng
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-29 01:56:00 +0000