summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)Author
2020-10-01arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvellPali Rohár
Some Espressobin boards got assigned more than one MAC address. Update instructions how to correctly store and preserve all MAC addresses. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andre Heider <a.heider@gmail.com>
2020-09-22doc/build/gcc.rst: add missing apt-get *install*Heinrich Schuchardt
The install command is missing for an apt-get command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-21x86: fsp: Replace e-mmc with emmc in devicetree bindingsWolfgang Wallner
The term eMMC is used inconsistently within the FSP devicetree bindings (e-mmc and emmc), especially for "emmc-host-max-speed" documentation and code disagree. Change all eMMC instances within the FSP bindings to consistently use "emmc". The term "emmc" is already used a lot within U-Boot, while "e-mmc" is only used in the FSP bindings. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct one typo in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-18Merge tag 'u-boot-imx-20200918' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx ---------------------------------------------------------------- Fixes for 2020.10 ----------------- - Toradex boards - mx6qsabrelite: fix env offset - esdhc_imx: waiting for clock instead of sleep - dyn RAM calibration for entry point i.MX6 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/728274602
2020-09-17apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker
The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx8qxp: rename all occurences to colibri-imx8xPhilippe Schenker
The Toradex product is called colibri-imx8x consisting of SoM with i.MX8QXP and i.MX8DX SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-16doc: qemu: debug UART settings for QEMU ARM virtHeinrich Schuchardt
Provide the settings for the debug UART on the QEMU ARM virt board. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-12doc: describe building with GCCHeinrich Schuchardt
Provide a description of the U-Boot build process with GCC in the HTML documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-12doc: describe source repositoryHeinrich Schuchardt
Add a chapter to the HTML documentation describing how to retrieve the U-Boot sources. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01fastboot: Support defining raw partitions without a partition tableFilip Brozovic
Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2020-08-31arm: mvebu: Espressobin: Update README.marvell filePali Rohár
Include information about permanent ethernet MAC address and add link how to build ATF as U-Boot on Espressobin cannot be flashed without ATF. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Sipeed Maix support S-mode. - Provide command sbi. - Use fdtdec_get_addr_size_auto_parent to get fu540 cache base address. - Fix a compiler error with CONFIG_SPL_SMP=n. - Fix sifive ram driver 32 compiler warnings. - Fix kendryte/pll.h redefine nop() warning.
2020-08-25configs: defconfig for Sipeed Maix in S-modeHeinrich Schuchardt
Provide a defconfig that can be used to build U-Boot for the Maix boards running upon OpenSBI. Update the documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-08-24efi_loader: use ':' as separator for setenv -iHeinrich Schuchardt
setenv -e -i <address>,<filesize> can be used to set a UEFI variable from memory. For separating an address and a size we use ':' in most commands. Let's do the same for setenv -e -i. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-24doc: update UEFI documentationHeinrich Schuchardt
* UEFI variables can be persisted * describe that the sequence of files loaded before bootefi matters Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-23Merge tag 'dm-pull-22aug20' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm replace devfdt_get_addr_ptr() with dev_read_addr_ptr() binman fixes for portage various minor fixes 'bind' command improvements
2020-08-23Convert CONFIG_SYS_DEVICE_NULLDEV to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SYS_DEVICE_NULLDEV Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-22doc: add bind/unbind command documentationPatrice Chotard
Add documentation in doc/drivel-model for the bind/unbind command. Part of this documentation is extracted from original patch commit message: commit 49c752c93a78 ("cmd: Add bind/unbind commands to bind a device to a driver from the command line") Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-14doc: xen: Add Xen guest ARM64 board documentationAnastasiia Lukianenko
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-08-14doc: riscv: debug UART for MAIXHeinrich Schuchardt
Provide the required settings for the debug UART. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-08-14doc: riscv: Update documentation for Sipeed MAIX boardsHeinrich Schuchardt
The MAIXDUINO runs fine with the sipeed_maix_bitm_defconfig but a different board id parameter should be passed to kflash. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-08-07dm: Rename DM test flags to make them more genericSimon Glass
The test flags used by driver model are currently not available to other tests. Rather than creating two sets of flags, make these flags generic by changing the DM_ prefix to UT_ and moving them to the test.h header. This will allow adding other test flags without confusion. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04doc: move Clang documentation to HTMLHeinrich Schuchardt
* Move README.clang to doc/build/clang.rst and reformat as reStructeredText. * Indicate that -ffixed-r9 and -ffixed-x18 are used to reserve registers for gd. * Minor editing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-03doc: qemu-mips build instructionsHeinrich Schuchardt
Correct the make commands for the defconfigs. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-03arch: x86: apl: Update FSP parametersBernhard Messerklinger
Add missing parameters to support full configuration of the latest FSP MR6 release. Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29doc: add README doc for bcmns3 platformRayagonda Kokatanur
Add README doc for bcmns3 platform. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29arm: add (default) config for nanopi2 boardStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29pinctrl: add nexell driverStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - livetree API (dev_read_...) is used instead of fdt one (fdt...). - doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt added. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29i2c: add nexell driverStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - i2c/nx_i2c.c: Some adaptions mainly because of changes in "struct udevice". - several Bugfixes in nx_i2c.c. - the driver has been for s5p6818 only. Code extended appropriately in order s5p4418 is also working. - "probe_chip" added. - pinctrl-driver/dt is used instead of configuring the i2c I/O-pins in the i2c-driver. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29msm_gpio: Add support for Qualcomm IPQ40xxRobert Marko
Snapdragon SoCs and IPQ40xx use common TLMM IP, so existing driver supports IPQ40xx as well. So lets simply add a compatible for IPQ40xx. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
2020-07-29msm_serial: Read bit rate register value from DTRobert Marko
IPQ40xx and currently supported Snapdragon boards don't use the same one so enable reading it from DT, if no DT property is found default value is the same as the previous define. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27Move eSDHC adapter card identification to board filesYangbo Lu
The eSDHC adapter card identification and multiplexing configuration through FPGA had been implemented in both common mmc driver and fsl_esdhc driver. However it is proper to move these code to board files and do it during board initialization. The FPGA registers are also board specific. This patch is to move eSDHC adapter card identification and multiplexing configuration from mmc driver to specific board files. And the option CONFIG_FSL_ESDHC_ADAPTER_IDENT is no longer needed. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [Rebased, Removed T1040QDS change as board does not exist] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27fsl_dspi: Introduce DT bindings for CS-SCK and SCK-CS delaysVladimir Oltean
Communication with some SPI slaves just won't cut it if these delays (before the beginning, and after the end of a transfer) are not added to the Chip Select signal. These are a straight copy from Linux: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt drivers/spi/spi-fsl-dspi.c Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-25doc: Add new doc for soc ID driver modelDave Gerlach
Add a new documentation file for UCLASS_SOC and its usage to describe the SoC Device ID framework that allows SoC identification and device data matching. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25mkimage: Allow updating the FIT timestampSimon Glass
Normally the FIT timestamp is created the first time mkimage is run on a FIT, when converting the source .its to the binary .fit file. This corresponds to using the -f flag. But if the original input to mkimage is a binary file (already compiled) then the timestamp is assumed to have been set previously. Add a -t flag to allow setting the timestamp in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-24Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Fix SiFive HiFive Unleashed board booting failure problem. - Enable SiFive fu540 PWM driver. - Support SiFive fu540: SPI boot. - Update OpenSBI used for RISC-V CI testing. - Revert "riscv: Allow use of reset drivers". - Revert "Revert "riscv: sifive: fu540: Add gpio-restart support"". - sysreset: syscon: - Don't assume default value for offset and mask property. - Support value property. - qemu: Add syscon reboot and poweroff support. - Fix SIFIVE debug serial dependency. - Fix linking error when building u-boot-spl with no SMP support. - AE350 use fdtdec_get_addr_size_auto_noparent to parse smc reg. - Make memory node available to SPL in hifive-unleashed-a00-u-boot.dtsi - SiFive fu540 avoid using hardcoded ram base and size.
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24sifive: fu540: Add Booting from SPIJagan Teki
Add booting from SPI for SiFive Unleashed board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-20doc: Add new doc for soc ID driver modelDave Gerlach
Add a new documentation file for UCLASS_SOC and its usage to describe the SoC Device ID framework that allows SoC identification and device data matching. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-20mkimage: Allow updating the FIT timestampSimon Glass
Normally the FIT timestamp is created the first time mkimage is run on a FIT, when converting the source .its to the binary .fit file. This corresponds to using the -f flag. But if the original input to mkimage is a binary file (already compiled) then the timestamp is assumed to have been set previously. Add a -t flag to allow setting the timestamp in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20x86: coral: Update the memory mapSimon Glass
This currently excludes the temporary memory used to start up the APs. Add it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17doc: fit: Write hex address as hex instead of intMichal Simek
When update_uboot.its is used directly there is syntax error for no reason. Error report: mkimage -f update_uboot.its boot Error: update_uboot.its:18.12-13 syntax error FATAL ERROR: Unable to parse input tree mkimage: Can't read boot.tmp: Invalid argument Fixes: 4bae90904b69 ("Automatic software update from TFTP server") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-07-17doc: correct description of crash dumpsHeinrich Schuchardt
Correct the description of the ESR register. Fix a typo. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-17doc: multi-dtb-fit: Remove double underscoresFabio Estevam
Remove the incorrect usage of double underscores for the CONFIG_OF_LIST and CONFIG_SPL_OF_LIST symbols. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-07-17treewide: convert bd_t to struct bd_info manuallyMasahiro Yamada
Some code was not converted by coccinelle, somehow. I manually fixed up the remaining, and comments, README docs. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> [trini: Add arch/arm/mach-davinci/include/mach/sdmmc_defs.h and include/fdt_support.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-17doc: Coccinelle: move to HTML docHeinrich Schuchardt
Move doc/README.coccinelle to doc/develop/coccinelle.rst using the current linux-next version of the text. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-17sound: Add an ACPI driver for Maxim MAX98357acSimon Glass
This chip is used on coral and we need to generate ACPI tables for sound to make it work. Add a driver that does just this (i.e. at present does not actually support playing sound). Signed-off-by: Simon Glass <sjg@chromium.org> [bmeng: Use the correct acpi_irq_polarity enum number] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17sound: Add an ACPI driver for Dialog Semicondutor da7219Simon Glass
This chip is used on coral and we need to generate ACPI tables for sound to make it work. Add a driver that does just this (i.e. at present does not actually support playing sound). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-17dm: core: Add a way of overriding the ACPI device pathSimon Glass
Some devices such as GPIO need to override the normal path that would be generated by driver model. Add a device-tree property for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
generated by cgit (git 2.34.1) at 2024-12-22 20:02:56 +0000