summaryrefslogtreecommitdiff
path: root/drivers/clk/rockchip
AgeCommit message (Collapse)Author
2018-03-13rockchip: clk: rk3328: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3288: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk322x: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3188: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3036: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-02-24rockchip: clk: rk3399: handle set_rate/get_rate for PLL_PPLLPhilipp Tomsich
The device-tree node for the PMU clk controller assigns to its parent (i.e. PLL_PPLL) even though this clock currently is set up statically by an init-function. In order to avoid unexpected failures, a simple implementation of set_rate (which accepts requests, but notifies the caller of the preset frequency in its return value) and get_rate (which always returns the preset frequency) are added. Note that this is required for the RK808 PMIC to probe successfully on the RK3399-Q7, following the support for the assigned-clocks property. References: commit f4fcba5c5baa ("clk: implement clk_set_defaults()") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2018-02-24rockchip: clk: rk3368: handle clk_enable requests for GMACPhilipp Tomsich
Since commit ba1f96672522 ("net: designware: add clock support"), the designware GMAC driver enables all referenced clocks. While this is a no-op for the RK3368 during boot-up (reset behaviour has all the clock gates open anyway), we still need to handle the clock-ids passed in the enable op of the clock-driver and return a success. This change extends the RK3368 clk driver to: (a) provide a enable op (b) signals success to the caller when the clocks for the GMAC are enabled (no actual action is necessary as the gates are open after reset) References: commit ba1f96672522 ("net: designware: add clock support") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2018-02-24rockchip: clk: rk3399: handle clk_enable requests for GMACPhilipp Tomsich
Since commit ba1f96672522 ("net: designware: add clock support"), the designware GMAC driver enables all referenced clocks. While this is a no-op for the RK3399 during boot-up (reset behaviour has all the clock gates open anyway), we still need to handle the clock-ids passed in the enable op of the clock-driver and return a success. This change extends the enable-op of the rk3399 clk driver to signal success to the caller when the clocks for the GMAC are enabled. References: commit ba1f96672522 ("net: designware: add clock support") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2018-01-28rockchip: clk: guard set_parent implementations against OF_PLATDATAPhilipp Tomsich
The set_parent implementations do not make sense when OF_PLATDATA is enabled. We guard these against OF_PLATDATA and don't populate the set_parent-op when this is the case. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28clk: rockchip: clk_rk3368: Implement "assign-clock-parent"David Wu
Implement the setting parent for gmac clock, and add internal pll div set for mac clk. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and ↵David Wu
"assign-clock-rate" The RK3288 CRU-node assigns rates to a number of clocks that are not implemented in the RK3288 clock-driver (but which have been sufficiently initialised from rkclk_init()): for these clocks, we implement the gmac clock set parent, but simply ignore the others' set_rate() operation and return 0 to signal success. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28clk: rockchip: Add rk322x gamc clock supportDavid Wu
Assuming mac_clk is fed by an external clock, set clk_rmii_src clock select control register from IO for rgmii interface. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28clk: rockchip: Add rk3328 gamc clock supportDavid Wu
The rk3328 soc has two gmac controllers, one is gmac2io, the other is gmac2phy. We use the gmac2io rgmii interface for 1000M phy here. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: clk: rk3399: accept all assigned-clocks from the 'cru'-nodePhilipp Tomsich
The RK3399 CRU-node assigns rates to a number of clocks that are not implemented in the RK3399 clock-driver (but which have been sufficiently initialised from rkclk_init()): for these clocks, we simply ignore the set_rate() operation and return 0 to signal success. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: David Wu <david.wu@rock-chips.com> Series-changes: 2 - Fixed David's email address.
2018-01-28rockchip: clk: rk3399: implement set_parent() operationPhilipp Tomsich
This implements the (newly added) set_parent() operation for the RK3399 with a focus on allowing the RGMII clock parent to be configured via the assigned-clock-parents property of the GMAC node. This implementation supports only the GMAC (in fact only the RGMII clock parent) and allows to set this clock's parent either to the internal SCLK_GMAC or to an external clock input (identifiable by it providing a 'clock-output-name' of "gmac_clkin"). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: David Wu <david.wu@rock-chips.com> Series-changes: 2 - Fixed David's email address.
2018-01-09rockchip: clk: bind reset driverElaine Zhang
Bind rockchip reset to clock-controller with rockchip_reset_bind(). Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3128: add clock driverKever Yang
Add rk3128 clock driver and cru structure definition. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-26rockchip: clk: rk3399: change extract_bits to bitfield_extractPhilipp Tomsich
The RK3399 clk driver still has a left-over use of extract_bits, which can be replaced by using bitfield_extract from include/bitfield.h. This rewrites the invocation to use the shared function. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21rockchip: clock: update sysreset driver bindingKever Yang
Using priv for new sysreset driver binding. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01rockchip: rk3399: init CPU clock when rkclk_init()Kever Yang
Init the CPU and its buses to speed up the boot time. Move rkclk_init() to a place after rk3399_configure_cpu has defined at the same time, or else there will be a warning. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-04treewide: replace with error() with pr_err()Masahiro Yamada
U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-01rockchip: rk322x: fix pd_bus hclk/pclkKever Yang
The pd_bus hclk/pclk source is pd_bus aclk, not the PLL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: clk: fix typo in rk322x clock driverKever Yang
Fix typo RK322X/RK3036 in rk322x clock driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: clk: Add rk3399 SARADC clock supportDavid Wu
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 8-bits width. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: clk: Add rk3368 SARADC clock supportDavid Wu
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 8-bits width. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: clk: Add rk3328 SARADC clock supportDavid Wu
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 10-bits width. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: clk: Add SARADC clock support for rk3288David Wu
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 8-bits width. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: clk: Add rv1108 SARADC clock supportDavid Wu
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 10-bits width. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-18rockchip: clk: rk3399: Convert to livetreePhilipp Tomsich
Update the clock driver for the RK3399 to support a live device tree. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-18rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1Philipp Tomsich
The generic ehci-driver (ehci-generic.c) will try to enable the clocks listed in the DTSI. If this fails (e.g. due to clk_enable not being implemented in a driver and -ENOSYS being returned by the clk-uclass), the driver will bail our and print an error message. This implements a minimal clk_enable for the RK3399 and supports the clocks mandatory for the EHCI controllers; as these are enabled by default we simply return success. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-18rockchip: clk: rk3368: Convert to livetreePhilipp Tomsich
Update the clock driver for the RK3368 to support a live device tree. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Version-changes: 2 - use the dev_read_addr_ptr function in clk_rk3368.c
2017-09-15dtoc: Add support for 32 or 64-bit addressesSimon Glass
When using 32-bit addresses dtoc works correctly. For 64-bit addresses it does not since it ignores the #address-cells and #size-cells properties. Update the tool to use fdt64_t as the element type for reg properties when either the address or size is larger than one cell. Use the correct value so that C code can obtain the information from the device tree easily. Alos create a new type, fdt_val_t, which is defined to either fdt32_t or fdt64_t depending on the word size of the machine. This type corresponds to fdt_addr_t and fdt_size_t. Unfortunately we cannot just use those types since they are defined to phys_addr_t and phys_size_t which use 'unsigned long' in the 32-bit case, rather than 'unsigned int'. Add tests for the four combinations of address and size values (32/32, 64/64, 32/64, 64/32). Also update existing uses for rk3399 and rk3368 which now need to use the new fdt_val_t type. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Heiko Stuebner <heiko@sntech.de> Reported-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-08-13rockchip: clk: remove RATE_TO_DIVKever Yang
Use DIV_ROUND_UP instead RATE_TO_DIV for all Rockchip SoC clock driver. Add or fix the div-field overflow check at the same time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-13rockchip: clk: update dwmmc clock divKever Yang
dwmmc controller has default internal divider by 2, and we always provide double of the clock rate request by dwmmc controller. Sync code for all Rockchip SoC with: 4055b46 rockchip: clk: rk3288: fix mmc clock setting Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [fixup for 'missing DIV_ROUND_UP' conflict for clk_rk3288.c:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-13rockchip: clk: rk3368: add support for configuring the SPI clocksPhilipp Tomsich
As SPI support may be useful in the boot-flow, this adds support for configuring the SPI controller's clocks in the RK3368 clock driver. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13rockchip: clk: rk3368: mark 'priv' __maybe_unused in rk3368_clk_set_rate()Philipp Tomsich
With the clock support in rk3368_clk_set_rate() conditionalized on various feature definitions, 'priv' can remain unused (e.g. in the SPL build when only MMC is enabled). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13rockchip: clk: rk3368: add support for GMAC (SLCK_MAC) clockPhilipp Tomsich
To enable the GMAC on the RK3368, we need to set up the clocking appropriately to generate a tx_clk for the MAC. This adds an implementation that implements the use of the <&ext_gmac> clock (i.e. an external 125MHz clock for RGMII provided by the PHY). This is the clock setup used by the boards currently supported by U-Boot (i.e. Geekbox, Sheep and RK3368-uQ7). This includes the change from commit - rockchip: clk: rk3368: define GMAC_MUX_SEL_EXTCLK Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13rockchip: clk: rk3368: support configuring the DRAM PLL (from TPL)Philipp Tomsich
As part of the DRAM initialisation process (running as part of the TPL stage) on the RK3368, we need to set up the DRAM PLL. This implements support for configuring the PLL to for 1200, 1332 or 1600 MHz (i.e. for DDR3-1200, DDR3-1333, DDR3-1600 operating modes). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13rockchip: clk: rk3368: implement MMC/SD clock reparentingPhilipp Tomsich
The original clock support for MMC/SD cards on the RK3368 suffered from a tendency to select a divider less-or-equal to the the one giving the requested clock-rate: this can lead to higher-than-expected (or rather: higher than supported) clock rates for the MMC/SD communiction. This change rewrites the MMC/SD clock generation to: * always generate a clock less-than-or-equal to the requested clock * support reparenting among the CPLL, GPLL and OSC24M parents to generate the highest clock that does not exceed the requested rate In addition to this, the Linux DTS uses HCLK_MMC/HCLK_SDMMC instead of SCLK_MMC/SCLK_SDMMC: to match this (and to ensure that clock setup always works), we adjust the driver appropriately. This includes the changes from: - rockchip: clk: rk3368: convert MMC_PLL_SEL_* definitions to shifted-value form Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13rockchip: clk: rk3368: implement DPLL (DRAM PLL) supportPhilipp Tomsich
To implement a TPL stage (incl. its DRAM controller setup) for the RK3368, we'll want to configure the DPLL (DRAM PLL). This commit implements setting the DPLL (CLK_DDR) and provides PLL configuration details for the common DRAM operating speeds found on RK3368 boards. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13rockchip: clk: rk3368: do not change CPLL/GPLL before returning to BROMPhilipp Tomsich
The RK3368 has a somewhat temperamental BootROM (which I learned the hard way) when it comes to reconfiguring the CPLL and GPLL (in fact, experiments show that changing the GPLL broke things for me, while changing the CPLL seems to be more benign). These should not be modified by the SPL stage, if we intend to return to the BootROM for chain booting the next stage. This commit changes the clock initialisation to not change CPLL/GPLL before returning to the BootROM (i.e. in TPL). As it's safe to change these settings if we no longer intend to return to U-Boot, we'll run the full PLL setup a little later (i.e. in SPL). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13rockchip: clk: rk3368: support OF_PLATDATA for the RK3368 clk driverPhilipp Tomsich
With the RK3368's limited TPL size, we'll want to use OF_PLATFDATA for the SPL stage. This implements support for OF_PLATDATA in the clock driver for the RK3368. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13rockchip: clk: rk3368: implement bandwidth adjust for PLLsPhilipp Tomsich
The RK3368 TRM recommends to configure the bandwith adjustment (CON2) for PLLs to NF/2. This implements this for all reconfigurations of PLLs and removes the 'has_bwadj' flag (as the RK3368 always has the bandwidth-adjustment feature according to its manual). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-27rockchip: clk: rk3368: use correct (i.e. 'rk3368_clk_priv') structure for ↵Philipp Tomsich
auto-alloc The clk driver for the RK3368 picked the wrong data structure's size for its auto-alloc size: the size was calculated on the structure representing the CRU hardware block instead of the priv structure. As the CRU's register file is much larger than the driver's priv, this did not cause any pain (except wasting memory). Fix this by using the correct data structure's size. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11rockchip: rk322x: add clock driverKever Yang
Add clock driver init support for: - cpu, bus clock init; - emmc, sdmmc clock; - ddr clock; Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed format specified (%x -> %p) in clk_rk322x.c: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-23Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini
2017-06-23rockchip: clk: rk3036: correct setting for pll integer modeKever Yang
According to rk3036 TRM, pll_con1[12] should be set to '1' for the pll integer mode, while the '0' means the frac mode. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-23clk_rv1108.c: Fix unused variable warningTom Rini
The variables gpll_init_cfg and apll_init_cfg are unused in this file, remove them. Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-09rockchip: Init clocks again when chain-loadingSimon Glass
Detect with a previous boot loader has already set up the clocks and set them up again so that U-Boot gets what it expects. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09rockchip: rk3288: Convert clock driver to use shifted masksSimon Glass
Shifted masks are the standard approach with rockchip since it allows use of the mask without shifting it each time. Update the definitions and the driver to match. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-23 18:06:42 +0000