summaryrefslogtreecommitdiff
path: root/drivers/fpga
AgeCommit message (Collapse)Author
2019-07-30fpga: altera: cyclon2: Check function pointer before callingAlexander Dahl
As already done for the 'pre' function, a check is added to not follow a NULL pointer, if somebody has not assigned a 'post' function. Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: cyclon2: Fix indentationAlexander Dahl
Some code parts stood too far left … Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: cyclon2: Fix most checkpatch warningsAlexander Dahl
Nothing special, but done before further cleanup. * spacing * braces * __FUNCTION__ → __func__ Suggested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: virtex2: Add slave serial programming supportRobert Hancock
This adds support for slave serial programming, in addition to the previously supported slave SelectMAP mode. There are two ways that this can be used: -Using the clk and wdata callbacks in order to write image data one bit at a time using pure bit-banging. This works, but is rather painfully slow with typical image sizes. -By specifying the wbulkdata callback instead, the image loading process can be offloaded to SPI hardware. In this mode the clk and wdata callbacks do not need to be specified. This allows the image to be loaded much faster, taking only a few seconds with even relatively large images. Slave serial programming has been tested on the Kintex-7 series of FPGAs. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: Add additional clock cycles after DONE assertionRobert Hancock
Some Xilinx FPGA configuration options can result in the startup sequence extending past the end of the FPGA bitstream. Continue applying CCLK clock cycles for 8 cycles after DONE is asserted in order to ensure the startup sequence is complete, as recommended by Xilinx. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: Split out image writing from pre/post operationsRobert Hancock
This is in preparation for adding slave serial programming support, which uses the same pre/post operations as slave SelectMAP, to avoid duplicating code. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: added Kconfig optionRobert Hancock
Add an option to allow this driver to be selected with Kconfig. As noted in the description, this driver should also work with many newer Xilinx FPGA families as the programming methods are essentially the same. Also added a missing FPGA_XILINX dependency to the similar Spartan 3 driver. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: cosmetic: Cleanup code styleRobert Hancock
Address Checkpatch warnings in virtex2 code prior to making other changes. No functional change intended. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-21fpga: arria10: Fix error in fpga pin configurationDalon Westergreen
Pin configuration of the FPGA devicetree block should be done after core configuration in the arria10 fpga driver. This fix corrects the check of status, and ensures that the fpga pin mux is configured on correct configuration of the core fpga image. Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
2019-05-10spl: socfpga: Implement fpga bitstream loading with socfpga loadfsTien Fong Chee
Add support for loading FPGA bitstream to get DDR up running before U-Boot is loaded into DDR. Boot device initialization, generic firmware loader and SPL FAT support are required for this whole mechanism to work. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-10ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loadingTien Fong Chee
Add FPGA driver to support program FPGA with FPGA bitstream loading from filesystem. The driver are designed based on generic firmware loader framework. The driver can handle FPGA program operation from loading FPGA bitstream in flash to memory and then to program FPGA. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-10ARM: socfpga: Moving the watchdog reset to the for-loop status pollingTien Fong Chee
Current watchdog reset is misplaced after for-loop status polling, so this poses a risk that watchdog can't be reset timely if polling taking longer than watchdog timeout. This patch moving the watchdog reset into polling to ensure the watchdog can be reset timely. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-10ARM: socfpga: Cleaning up and ensuring consistent format messages in driverTien Fong Chee
Ensure all the debug messages are always prefix with "FPGA: " and comment beginning with uppercase letter. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-04-16arm: zynq: Add an info message about post configSiva Durga Prasad Paladugu
Post configuration cant be run at u-boot as u-boot didn't has any info about the design.So,this patch adds an info message that post config was not run and needs to be run manually if needed. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16fpga: Replace char * with const char * for filenameTien Fong Chee
Ensure the string for filename is always constant, otherwise it can be corrupted by the writing. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-18ARM: socfpga: stratix10: Return valid error code from FPGA driverAng, Chee Hong
This patch prevent the Stratix 10 FPGA driver incorrectly return the transaction ID as the mailbox error code. It should always return the actual mailbox error code from SDM firmware. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2019-01-24fpga: zynqmp: show an error message when FPGA programming failsLuca Ceresoli
When FPGA programming fails, it does so silently, unless debugging code is enabled. This makes it hard to detect problems in production environments. Print the error message unconditionally so the error doesn't go unnoticed. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-20arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device tableAng, Chee Hong
Enable 'fpga' command in u-boot. User will be able to use the FPGA command to program the FPGA on Stratix10 SoC. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration DriverAng, Chee Hong
Enable FPGA reconfiguration support for Stratix 10 SoC. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-10-31arm: socfpga: fpga: fix type of local variableSimon Goldschmidt
The 'status' variable in 'socfpga_load()' for both gen5 and arria10 is of type 'unsigned long' while it is always used as 'int' only. Change it to 'int'. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-09-26fpga: zynqmp: Modify PL bitstream loading sequenceSiva Durga Prasad Paladugu
This patch modifies PL bitstream loading sequence as per latest Xilfpga which supports all variants of bitstream images generated from vivado and from bootgen. With this new change in Xilfpga, uboot doesn't need to validate and swap bitstream as it will be taken care inside Xilfpga. ZynqMP PL driver now checks for supporting PMUFW version before skipping the validation and swap sequence as there can be old PMUFW which doesn't supports this feature. In this case, driver uses old way of PL bitstream loading sequence. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-11fpga: Kconfig: Replace spaces with tabsMichal Simek
Trivial Kconfig cleanup. Use tabs instead of spaces. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19drivers: fpga: zynqpl: fix compilation with SPLLuis Araneda
Disable the use of function zynq_loadfs when compiling the driver for the SPL, as the following filesystem functions are not found by the linker: - fs_set_blk_dev - fs_read - fs_set_blk_dev - fs_read - fs_read Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19xilinx: zynq: Add support to secure imagesSiva Durga Prasad Paladugu
This patch basically adds two new commands for loadig secure images. 1. zynq rsa adds support to load secure image which can be both authenticated or encrypted or both authenticated and encrypted image in xilinx bootimage(BOOT.bin) format. 2. zynq aes command adds support to decrypt and load encrypted image back to DDR as per destination address. The image has to be encrypted using xilinx bootgen tool and to get only the encrypted image from tool use -split option while invoking bootgen. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-01fpga: zynqmp: Add secure bitstream loading for ZynqMPSiva Durga Prasad Paladugu
This patch adds support for loading secure bitstreams on ZynqMP platforms. The secure bitstream images has to be generated using Xilinx bootgen tool. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-01cmd: fpga: Add support to load secure bitstreamsSiva Durga Prasad Paladugu
This patch adds support to load secure bitstreams(authenticated or encrypted or both). As of now, this feature is added and tested only for xilinx bitstreams and the secure bitstream was generated using xilinx bootgen tool, but the command is defined in more generic way. Command example to load authenticated and device key encrypted bitstream is as follows "fpga loads 0 100000 2000000 0 1" Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27arm: socfpga: Fix with the correct polling on bit is setTien Fong Chee
Commit 2baa997240d ("arm: socfpga: Add FPGA driver support for Arria 10") Polling on wrong cleared bit. Fix with correct polling on bit is set. Fixes: 2baa997240d ("arm: socfpga: Add FPGA driver support for Arria 10") Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-04-09fpga: zynq: Add delay after PCFG_PROG_B changeSiva Durga Prasad Paladugu
There is delay needed after PCFG_PROGB change if AES key source is efuse. This fixes the issue of encrypted bitstream loading with AES efuse as key source. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09fpga: zynqmp: Fix the nonsecure bitstream loading issueSiva Durga Prasad Paladugu
Xilfpga library expects the size of bitstream in a pointer but currenly we are passing the size as a value. This patch fixes this issue. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Nava kishore Manne <navam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09fpga: zynqmp: Update zynqmp_load() as per latest xilfpgaSiva Durga Prasad Paladugu
Latest xilfpga expects to set BIT5 of flags for nonsecure bitsream and also expects length in bytes instead of words This patch does the same. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09fpga: zynqmp: Add support to get the PCAP status for fpga info commandNitin Jain
This patch adds support for ZynqMP platform to print FPGA PCAP status for "fpga status" command. Signed-off-by: Nitin Jain <nitinj@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23fpga: Simplify error path in fpga_addMichal Simek
Check !desc earlier to simplify code. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Reviewed-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
2018-02-28arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPLVipul Kumar
This patch added Kconfig support for CONFIG_FPGA_ZYNQPL and migrates the values over to the defconfigs. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2018-02-28fpga: Added Kconfig support for FPGA_SPARTAN3Vipul Kumar
This patch added Kconfig support for FPGA_SPARTAN3 and migrates the values over to the defconfigs. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2018-01-24wait_bit: use wait_for_bit_le32 and remove wait_for_bitÁlvaro Fernández Rojas
wait_for_bit callers use the 32 bit LE version Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-12-14fpga: allow programming fpga from FIT image for all FPGA driversGoldschmidt Simon
This drops the limit that fpga is only loaded from FIT images for Xilinx. This is done by moving the 'partial' check from 'common/image.c' to 'drivers/fpga/xilinx.c' (the only driver supporting partial images yet) and supplies a weak default implementation in 'drivers/fpga/fpga.c'. Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (On zcu102) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-26arm: socfpga: Enhance FPGA program write rbf data with size >= 4 bytesTien Fong Chee
Existing FPGA program write is always assume RBF data >= 32 bytes, so any rbf data less than 32 bytes writing to FPGA would be failed. This patch enhances the FPGA program write to support rbf data with size >= 4 bytes. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2017-08-02fpga: xilinx: Avoid using local intermediate bufferSiva Durga Prasad Paladugu
Dont use local temporary buffer for printing out the info instead use directly from memroy. This fixes the issue of stack corruprion due to local buffer overflow. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-07-26arm: socfpga: Add FPGA driver support for Arria 10Tien Fong Chee
Add FPGA driver support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-07-26kconfig: Convert FPGA_SOCFPGA configuration to KconfigTien Fong Chee
This converts the following to Kconfig: CONFIG_FPGA_SOCFPGA Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-07-26arm: socfpga: Restructure FPGA driver in the preparation to support A10Tien Fong Chee
Move FPGA driver which is Gen5 specific code into Gen5 driver file and keeping common FPGA driver intact. All the changes are still keeping in driver/fpga/ and no functional change. Subsequent patch would move FPGA manager driver from arch/arm into driver/fpga/. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-06-20fpga: zynqmppl: Reuse invoke_smc routineSiva Durga Prasad Paladugu
Reuse invoke_smc() routine which is already defined instead of duplicating same at multiple places. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-04-18FPGA: drivers/fpga/ivm_core.c: incorrect printfxypron.glpk@gmx.de
The number of arguments for printf does not match the format string. The problem was indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-10fpga: zynqmp: Remove empty functionsMichal Simek
Xilinx core files will take care about it. There is no need to have these functions because they do nothing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-16arm: imx: add i.MX53 Beckhoff CX9020 Embedded PCPatrick Bruenn
Add CX9020 board based on mx53loco. Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse serial_mxc with DTE and prepare for device tree migration of other functions and imx53 devices. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2016-09-23treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-22fpga: xilinx: zynqmp: Add PL bitstream download support for ZynqMPSiva Durga Prasad Paladugu
Add PL bitstream dowload support for ZynqMP Bitstream will be validated by uboot and loaded to PL by invoking an smc instruction to ATF which route this request to PMU FW which will take care of loading it to PL Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22fpga: Add Kconfig to fpga subsystemMichal Simek
Add missing Kconfig to fpga subsystem to be able to add new options. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2024-12-27 00:39:35 +0000