Age | Commit message (Expand) | Author |
2012-08-13 | mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs | Holger Brunck |
2012-08-13 | cfi_flash: add support for Spansion flash PPB sector protection | Anatolij Gustschin |
2012-03-21 | cfi: fix the incomplete erased status check in buffer write | Tao Hou |
2012-02-09 | * Fix: watchdog timed out, if flash blank (0xFF) blocks | Jens Scharsig (BuS Elektronik) |
2011-10-27 | GCC4.6: Squash warning in cfi_flash.c | Marek Vasut |
2011-07-26 | Timer: Allow reset_timer() only for systems with low resolution timers | Graeme Russ |
2011-06-29 | cfi_flash: reverse geometry for newer STM parts | Mike Frysinger |
2011-04-21 | cfi_flash driver - Add delay after reset command | Aaron Williams |
2011-04-21 | mtd, cfi: read AMD 3-byte (expanded) device ids on 16bit devices | Heiko Schocher |
2011-04-21 | cfi_flash: reverse geometry for M29W800DT parts | Mike Frysinger |
2011-04-13 | cfi_flash: Fix CONFIG_SYS_FLASH_AUTOPROTECT_LIST usage | Peter Tyser |
2011-04-07 | mtd, cfi: introduce void flash_protect_default(void) | Heiko Schocher |
2011-04-07 | cfi_flash: use AMD fixups for AMIC (e.g. A29L160A series) too | Mario Schuknecht |
2011-03-28 | cfi_flash: fix bug with flash banks with different sector numbers | Martin Krause |
2011-01-19 | Replace "FLASH" strings with "Flash" or "flash" | Peter Tyser |
2011-01-09 | cfi_flash: avoid flash_verbose when possible | Mike Frysinger |
2010-12-17 | cfi_flash: Add optional config register write to cfi-detection | Stefan Roese |
2010-12-17 | cfi_flash: Use flash_read32() in sector_erased() | Stefan Roese |
2010-12-17 | cfi_flash: Fix problems with status/id read mode | Stefan Roese |
2010-11-28 | cfi_flash: fix bug introduced while recent change to flash_get_size() | Anatolij Gustschin |
2010-10-23 | cfi_flash: handle 'chip size exceeds address window' situation | Ilya Yanok |
2010-10-12 | cfi_flash: Fix "Unknown FLASH" error message | John Schmoller |
2010-09-20 | cfi_flash: Simplify dynamic flash bank number detection | Stefan Roese |
2010-09-20 | cfi_flash: Add weak default for cfi_flash_bank_addr() | Stefan Roese |
2010-09-20 | cfi_flash: Simplify flash_get_info() | Stefan Roese |
2010-08-18 | Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips. | Philippe De Muyter |
2010-08-18 | cfi_flash: Cleanup flash_print_info() | Stefan Roese |
2010-08-18 | Fix printing & reading of 16-bit CFI device identifiers | Philippe De Muyter |
2010-08-18 | cfi_flash: flinfo: allow user interrupt in flash print info fn | Kim Phillips |
2010-08-04 | Rename getenv_r() into getenv_f() | Wolfgang Denk |
2010-04-07 | cfi_flash: reset timer in flash status check | Thomas Chou |
2010-03-29 | Merge remote branch 'origin/master' into next | Wolfgang Denk |
2010-03-26 | cfi flash: add status polling method for amd flash | Thomas Chou |
2010-03-25 | cfi_flash: precision and underflow problem in tout calculation | Renato Andreola |
2010-03-04 | ] fix monitor protection for CONFIG_MONITOR_IS_IN_RAM | Wolfgang Wegner |
2009-10-28 | cfi: Add weak default function for flash_cmd_reset() | Stefan Roese |
2009-08-26 | Support up to 7 banks for ids as specified in JEDEC JEP106Z | Niklaus Giger |
2009-08-13 | flash: Fix CFI buffer size bug | John Schmoller |
2009-07-13 | issue write command to base for JEDEC flash | Po-Yu Chuang |
2009-06-04 | Redundant Environment: protect full sector size | Wolfgang Denk |
2009-04-04 | Add support for the AT91RM9200EK Board. | Ulf Samuelsson |
2009-03-23 | Make flash protection work, when the environment is in EEPROM | Eric Schumann |
2009-03-19 | CFI: geometry reversal for STMicro M29W320DT | Richard Retanubun |
2009-02-11 | cfi: make flash_get_info() non static | Heiko Schocher |
2009-02-07 | Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master | Wolfgang Denk |
2009-02-05 | cfi_flash: Fix typo in cfi_flash.c | Stefan Roese |
2009-02-05 | cfi_flash: Silence compilation warning | Stefan Roese |
2009-02-05 | flash/cfi_flash: Use virtual sector start address, not phys | Becky Bruce |
2009-02-04 | Fix compiler warning | Wolfgang Denk |
2009-01-26 | CFI: Add geometry reversal for STMicro M29W320ET | Richard Retanubun |