summaryrefslogtreecommitdiff
path: root/drivers/ram/rockchip
AgeCommit message (Collapse)Author
2020-02-13ram: rockchip: Fix Kconfig dependency for RAM_ROCKCHIP_DEBUGMichal Simek
There is no reason to show RAM_ROCKCHIP_DEBUG entry in other .config files as I see it for Xilinx ZynqMP. \# CONFIG_U_QE is not set \# CONFIG_RAM is not set CONFIG_RAM_ROCKCHIP_DEBUG=y Add missing dependency on RAM_ROCKCHIP driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-01-30ram: rk3328: only do data traning for cs0Kever Yang
No need to do twice data training for rk3328 ddr sdram, we re-use the setting for both channel. And adjust the sdram_init properly for correct init flow. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2020-01-30arm: rockchip: Add common cru.hJagan Teki
Few of the rockchip family SoC atleast rk3288, rk3399 are sharing some cru register bits so adding common code between these SoC families would require to include both cru include files that indeed resulting function declarations error. So, create a common cru include as cru.h then include the rk3399 arch cru include file and move the common cru register bit definitions into it. The rest of rockchip cru files will add it in future. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-30ram: rk3399: don't assume phy_io_config() uses real regsThomas Hebb
In the RK3399 DRAM driver, the function set_ds_odt() supports operating in two different modes, selected by the ctl_phy_reg argument: when true, the function reads and writes directly from the DRAM registers, accessed through "chan->pctl->denali_*"; when false, the function reads and writes from an array, accessed through "params->pctl_regs.denali_*", which is written to DRAM registers at a later time. However, phy_config_io(), which is called by set_ds_odt() to do a subset of its register operations, operates directly on DRAM registers at all times. This means that it reads incorrect values (and writes new values prematurely) when ctl_phy_reg in set_ds_odt() is false. Fix this by passing in the address of the registers to work with. This prevents an "Invalid DRV value" error in the SPL debug log and (presumably) results in a more correct end state. See the following logs from a RK3399 NanoPi M4 board (4GB LPDDR3): Before: sdram_init() Starting SDRAM initialization... phy_io_config() Invalid DRV value. phy_io_config() Invalid DRV value. sdram_init() sdram_init: data trained for rank 2, ch 0 phy_io_config() Invalid DRV value. phy_io_config() Invalid DRV value. sdram_init() sdram_init: data trained for rank 2, ch 1 Channel 0: LPDDR3, 933MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR3, 933MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride 256B stride sdram_init() Finish SDRAM initialization... After: sdram_init() Starting SDRAM initialization... sdram_init() sdram_init: data trained for rank 2, ch 0 sdram_init() sdram_init: data trained for rank 2, ch 1 Channel 0: LPDDR3, 933MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR3, 933MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride 256B stride sdram_init() Finish SDRAM initialization... Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-17common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-17rockchip: rk3308: Add sdram driverAndy Yan
A dm based dram driver for rk3308 u-boot to get capacity. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3399: Fix dram setting to make dram more stableYouMin Chen
There are some code different with rockchip vendor code which may lead to different bugs, including: 1) Fix setting error about LPDDR3 dram size ODT. 2) Set phy io speed to 0x2. 3) Fix setting error about phy_pad_fdbk_drive. 4) Fix setting error about PI_WDQLVL_VREF_EN Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3399: update calculate_strideKever Yang
Update the calculation of the stride to support all the DRAM case. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3399: Sync the io setting from Rockchip vendor codeKever Yang
The io setting are updated after some bugfix in different rk3399 boards, sync the code from vendor. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rockchip: update lpddr4 timing for rk3399Kever Yang
Update lpddr timing in lpddr4-400 and lpddr4-800 file from rockchip vendor code; Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3399: add support detect capacityYouMin Chen
Add capacity detect for rk3399 so that the driver able to detect the capacity automatically. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3399: update the function of sdram_initYouMin Chen
Clean up the sdram_init to keep sync with rockchip source code. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3399: fix error about get_ddrc0_con reg addrYouMin Chen
Correct the register to its correct name. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3399: Clean up codeYouMin Chen
Clean up rk3399 dram driver source code for more readable. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3399: migrate to use common codeYouMin Chen
For there are some structures and functions are common for all rockchip SoCs, migrate to use the common code so that we can clean up reduandent codes. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3328: use common sdram driverYouMin Chen
RK3328 has a similar controller and phy with PX30, so we can use the common driver for it and remove the duplicate codes. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: px30: add sdram driverYouMin Chen
Add the sdram driver for PX30 to support ddr3, ddr4, lpddr2 and lpddr3. For TPL_BUILD, the driver implement full dram init and without DM support due to the limit of internal SRAM size. For SPL and U-Boot proper, it's a simple driver with dm for get dram_info like other SoCs. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rockchip: add phy driver code for PX30Kever Yang
This sdram_phy_px30.c is based on PX30 SoC, the functions are common for phy, other SoCs with similar hardware could re-use it. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rockchip: add controller code for PX30Kever Yang
This sdram_pctl_px30.c is based on PX30 SoC, the functions are common for controller, other SoCs with similar hardware could re-use it. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rockchip: Default enable DRAM debug infoKever Yang
The debug info for dram is main about the capacity related info which is very important the board init, so set this default enable. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rockchip: move sdram_debug function into sdram_commonKever Yang
The functions for dram info print are part of common code. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rockchip: add common code for sdram driverKever Yang
There are some function like os_reg setting, capacity detect functions, can be used as common code for different Rockchip SoCs, add a sdram_common.c for all these functions. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rockchip: rename sdram_common.c/h to sdram.cKever Yang
rename sdram_common.c in arch/arm/mach-rockchip to sdram.c; so that we can use the file name sdram_common.c in dram driver for better understand the code; clean the related file who has use the header file at the same time. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rockchip: rename sdram.h to sdram_rk3288.hKever Yang
The header file sdram.h is used for rk3288 and similar SoCs, rename it to make it more understandable. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10ram: rk3328: Fix loading of skew valuesSimon South
Fix a typo that caused incorrect values to be loaded into the DRAM controller's deskew registers. Signed-off-by: Simon South <simon@simonsouth.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10ram: rk3328: Use correct frequency units in functionSimon South
Fix a pair of tests in phy_dll_bypass_set() that used incorrect units for the DDR frequency, causing the DRAM controller to be misconfigured in most cases. Signed-off-by: Simon South <simon@simonsouth.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19ram: rk3288: Initialize dram for TPL buildsJagan Teki
Few of the rk3288 boards like tinker, vyasa are using TPL, SPL bootchain so the dram initialization must needed during TPL stage. So add proper ifconstruct to satisfy both TPL, SPL and SPL-only bootchain boards. This eventually fixing TPL to SPL handoff, otherwise missing dram initilaztion at TPL stage would leads to SPL hang. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-08-23ram: rk3399: update cap and ddrconfig for each channel after initKever Yang
We need to store all the ram related cap/map info back to register for each channel after all the init has been done in case some of register was reset during the process. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: ram: add full feature rk3328 DRAM driverKever Yang
This driver supports DDR3/LPDDR3/DDR4 SDRAM initialization. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/9fb0777ec3cc6a89af9d2e0969c3bfe58306a88d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: sdram: use udelay instead of rockchip_udelayKever Yang
Use system api for udelay instead of vendor defined api, and rockchip_udelay() will be removed. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add lpddr4 set rate supportJagan Teki
Unlike rest of dram type chips, LPDDR4 initialization start with at board selected frequency (say 50MHz) and then it switches into 400MHz and 800MHz simultaneously to make the proper sequence work on each channel with associated training. The lpddr4 set rate sequnce will follow by setting lpddr4 - dq out - ca odt - MR3 - MR12 - MR14 registers sets in sequential order. Here is sameple log about LPDDR4-100 init sequence in Rockpro64: Channel 0: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride channel 0 training pass channel 1 training pass change freq to 400 MHz 0, 1 channel 0 training pass channel 1 training pass change freq to 800 MHz 1, 0 This patch add support to this init sequence via lpddr4 set rate by taking sdram timing parameters from 400, 800 .inc files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Fix travis error, use one ret instead of ret[2] in set_ctrl) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Add set_rate sdram rk3399 opsJagan Teki
DDR set rate can be even required for lpddr4 and we need to keep the lpddr4 code to compile only for relevant boards which do support lpddr4. For this requirement, and for code readability handle data training via sdram_rk3399_ops with .set_rate and same will update in future while supporting lpddr4 code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Add LPPDDR4-800 timings incJagan Teki
LPDDR4 initialization start with at board selected frequency and then it switches into 400MHz and 800MHz simultaneously to make the proper sequence work on each channel with associated training. So, add LPDDR4-800 timings inc file in driver area so-that these timings will take during LPDDR4 initialization phase. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Add LPPDDR4-400 timings incJagan Teki
LPDDR4 initialization start with at board selected frequency and then it switches into 400MHz and 800MHz simultaneously to make the proper sequence work on each channel with associated training. So, add LPDDR4-400 timings inc file in driver area so-that these timings will take during LPDDR4 initialization phase. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Add LPPDR4 mr detectionJagan Teki
Like data training in other sdram types, mr detection need to taken care for lpddr4 with looped rank and associated channel to make sure the proper configuration held. Once the mr detection successful for active and configured rank with channel number, the same can later reused during actual LPDDR4 initialization. So, add code to support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Handle data training via opsJagan Teki
data training can be even required for lpddr4 and we need to keep the lpddr4 code to compile only for relevant boards which do support lpddr4. For this requirement, and for code readability handle data training via sdram_rk3399_ops and same will update in future while supporting lpddr4 code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Simplify data training first argumentJagan Teki
data training is using chan_info as first argument with channel number as second argument instead of that use dram_info as first argument so-that we can get the chan_info at data training definition. This was the argument handling is meaningful, readable and it would help to add similar data training for lpddr4 in future. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Update lpddr4 vref_mode_acJagan Teki
Update vref_mode_ac for lpddr4 based on VDDQ/3/2=16.8% Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Update lpddr4 mode_sel based on io settingsJagan Teki
The mode_sel on lpddr4 value is depending on IO settings of rd_vref. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Update lpddr4 vref based on io settingsJagan Teki
The vref_mode_dq, vref_value_dq on lpddr4 value is depending on IO settings of rd_vref. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Get lpddr4 tsel_rd_en from io settingsJagan Teki
For base.odt 1 the lpddr4 tsel_rd_en value is depending on IO settings of rd_odt_en. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Configure soc odt supportJagan Teki
CTL 145, 146, 159, 160 registers are used to configure soc odt on rk3399. These soc odt values are updated from CS0_MR22_VAL and CS1_MR22_VAL and for lpddr4 these values ORed with tsel_rd_select_n. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Add tsel control clock driveJagan Teki
tsel contrl clock drives are required to configure PHY 929, 939 controls drive settings. Add support for these control clock for all dramtype sdrams. Thse control clock drives are configure via tsel_ckcs_select_p and tsel_ckcs_select_n variables. tsel_ckcs_select_n is PHY_DRV_ODT_34_3 value where as tsel_ckcs_select_p is retrived from IO settings for lpddr4 and rest uses PHY_DRV_ODT_34_3. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: sdram: Configure lpddr4 tsel rd, wr based on IO settingsJagan Teki
Now we have IO settings available for all supported sdram frequencies, so retrieve these IO settings and make used for LPDDR4 ds odt configuration. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Add IO settingsJagan Teki
Add IO settings for dram ctl and phy. IO settings are useful for configuring ctl, phy odt, vref, mr5, mode select and other needed input output operations for lpddr4 or any other dramtype sdram. Right now, this patch added IO setting for all supported sdram frequencies. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Don't disable dfi dram clk for lpddr4, rank 1Jagan Teki
The hardware for LPDDR4 with - CLK0P/N connect to lower 16-bits - CLK1P/N connect to higher 16-bits and usually dfi dram clk is configured via CLK1P/N, so disabling dfi dram clk will disable the CLK1P/N as well. So, add patch to not to disable dfi dram clk for lpddr4, with rank 1. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Configure tsel write ca for lpddr4Jagan Teki
tsel write ca_p and ca_n values need to write on PHY 544, 672 and 800 to configure ds odt. Configure the same PHY register for lpddr4 would require a mask value of (300 << 8). Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Map chipselect for lpddr4Jagan Teki
Assign desired cs_map values for lpddr4 during set memory map. Initial cs_map values is based on the sdram parameters, so the same will adjusted based dramtype as LPDDR4. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Configure PHY RX_CM_INPUT for lpddr4Jagan Teki
Configure PHY RX_CM_INPUT for lpddr4 during phy IO config. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-26 03:54:39 +0000