summaryrefslogtreecommitdiff
path: root/drivers/spi/xilinx_spi.c
AgeCommit message (Collapse)Author
2020-06-24spi: zynq_[q]spi: Convert config's to macro'sAshok Reddy Soma
Remove below config options and convert them to macros. They have never been configured to different values than default one. And also it makes sense to reduce the config_whitelist. CONFIG_SYS_ZYNQ_SPI_WAIT CONFIG_SYS_ZYNQ_QSPI_WAIT CONFIG_XILINX_SPI_IDLE_VAL Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-16spi: xilinx_spi: convert to livetreeVipul Kumar
Update the xilinx spi driver to support a live tree. Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16spi: xilinx_spi: Added support to read JEDEC-id twice at the boot timeVipul Kumar
This patch is for the startup block issue in the spi controller. SPI clock is passing through STARTUP block to FLASH. STARTUP block don't provide clock as soon as QSPI provides command. So, first command fails. This patch added support to read JEDEC id in xilinx_spi_xfer (). Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16spi: xilinx_spi: Modify transfer logic xilinx_spi_xfer() functionVipul Kumar
This patch modify xilinx_spi_xfer() function and add rxfifo() and txfifo() functions to add the modularity so that these functions can be used by other functions within the same file. This patch also added support to read fifo_size from dts. Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16spi: xilinx: Read reg base address from DTS fileMichal Simek
This patch added support to read register base address from DTS file. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2015-12-11spi: xilinx: Add new compatible stringsMichal Simek
Add xlnx,xps-spi-2.00.a/b which is compatible string listed in the Linux kernel. Remove origin one which has no real background. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: xilinx_spi: Use GENMASKJagan Teki
Replace numeric mask hexcodes with GENMASK macro in xilinx_spi Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: xilinx_spi: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in xilinx_spi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-11spi: xilinx_spi: Fix to configure CPOL, CPHA maskJagan Teki
priv->mode is initialized when .set_speed triggers with mode value, so checking mode for configuring CPOL, CPHA using priv->mode is invalid hence use mode from .set_speed argument, and at the end priv->mode will initialized with mode. This patch also replaces formatting string to use speed instead of mode in .set_speed ops. Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01spi: xilinx_spi: Add asm/io.h include fileJagan Teki
This patch includes asm/io.h for readl and writel calls. build errors: drivers/spi/xilinx_spi.c: In function 'xilinx_spi_probe': drivers/spi/xilinx_spi.c:119:2: warning: implicit declaration of function 'writel' [-Wimplicit-function-declaration] drivers/spi/xilinx_spi.c: In function 'xilinx_spi_xfer': drivers/spi/xilinx_spi.c:193:2: warning: implicit declaration of function 'readl' [-Wimplicit-function-declaration] Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Michal Simek <michal.simek@xilinx.com>
2015-07-01dm: spi: xilinx_spi: Convert to driver modelJagan Teki
This converts the xilinx spi driver to use the driver model. Signed-off-by: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com>
2015-07-01spi: xilinx_spi: Driver clean-upJagan Teki
- Zap unneeded macros - Re-arrange the code - Removed __attribute__((weak)) - Replace __func__ macro with func names to save macro transition. - Re-arranged comment lines. - Arrange driver code in more readable format[1] [1] http://patchwork.ozlabs.org/patch/265683/ Signed-off-by: Jagan Teki <jteki@openedev.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-07-01spi: xilinx_spi: Move header code to driverJagan Teki
Move the header code into driver for more readable and easy to access it. Signed-off-by: Jagan Teki <jteki@openedev.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2014-02-18spi: xilinx: Move timeout calculation out of the loopMichal Simek
Timeout calculation should be out of the data loop. This patch increase spi bandwidth for 30%. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-16spi: Add GPL-2.0+ SPDX-License-Identifier for missing filesJagannadha Sutradharudu Teki
Added GPL-2.0+ SPDX-License-Identifier for missed spi source files. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-03-19spi: Use spi_alloc_slave() in each SPI driverSimon Glass
Rather than each driver having its own way to allocate a SPI slave, use the new allocation function everywhere. This will make it easier to extend the interface without breaking drivers. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-04spi: xilinx_spi: Perform software reset during slave setupJason Wu
to make sure it is in the clear state. Signed-off-by: Jason Wu <huanyu@xilinx.com>
2012-09-11spi: xilinx: Remove unused variableStephan Linz
Warning is: xilinx_spi.c: In function 'spi_setup_slave': xilinx_spi.c:81: warning: unused variable 'regs' Signed-off-by: Stephan Linz <linz@li-pro.net> CC: Michal Simek <monstr@monstr.eu>
2012-07-31spi: microblaze: Adds driver for Xilinx SPI controllerStephan Linz
This is an improved version of the driver patch original submitted by Graeme Smecher <graeme.smecher@mail.mcgill.ca> The changes are: - remove hard coded Xilinx BSP defines (XPAR_SPI_*) and use CONFIG_SYS_SPI_BASE from config.h instead - add extensive register struct definitions - remove offset calculation for register access and use the new register struct instead - move default SPI controller configuration from spi_setup_slave() to spi_claim_bus() - add spi_set_speed() - insert SPI controller deactivation in spi_release_bus() - protect while loops in spi_xfer() with counter / timeouts - support SPI mode flags: LSB_FIRST, CPHA, CPOL, LOOP Come from: http://patchwork.ozlabs.org/patch/71797/ Signed-off-by: Stephan Linz <linz@li-pro.net> Tested-by: Michal Simek <monstr@monstr.eu>
generated by cgit (git 2.34.1) at 2024-12-23 05:36:37 +0000