summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-25common: add blkcache initAngelo Durgehello
On m68k, block_cache list is relocated, but next and prev list pointers are not adjusted to the relocated struct list_head address, so the first iteration over the block_cache list hangs. This patch initializes the block_cache list after relocation. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com> Reviewed-by: Eric Nelson <eric@nelint.com>
2020-01-25net: macb: Drop local cache flushVignesh Raghavendra
Now that arch specific dma mapping APIs take care of cache flush/invalidate, drop local cache flush operation. While at that fix dma_unmap_single() call to match new prototype Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-01-25mtd: denali: Drop custom dma mapping functionsVignesh Raghavendra
Drop local dma_map_single() and dma_unmap_single() and use arch specific common implementation Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-25mmc: tmio-common: Drop custom dma mapping functionsVignesh Raghavendra
Drop local dma_map_single() and dma_unmap_single() and use arch specific common implementation Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-25fastboot: mt85xx: add command to flash/erase emmc hwpartmingming lee
This patch includes the following: 1. Add fastboot command to erase the whole EMMC_USER 2. Add fastboot command to flash image at EMMC_BOOT1 3. Add fastboot command to erase the whole EMMC_BOOT1 4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25usb: musb-new: mt85xx: add musb-new gadget driver.mingming lee
Using musb-new structure for mt85xx gadget driver. Add gadget driver dts for mt8518 SoCs. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25crypto: make mod_exp_sw() staticHeinrich Schuchardt
Function mod_exp_sw() is only used via the operators of the uclass. It is not defined in any include. Make mod_exp_sw() static. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-25lib: Kconfig dependencies for pseudo-random libraryHeinrich Schuchardt
drivers/rng/sandbox_rng.c requires rand() to be defined but configuration option CONFIG_CONFIG_LIB_RAND selected in drivers/rng/Kconfig does not exist. test/lib/test_aes.c requires rand() to be defined. Fix the selection criteria for choice "Pseudo-random library support type". Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-24phy: sun4i-usb: Add Allwinner R40 supportAndre Przywara
Since every Allwinner USB PHY seems to be slightly different from each other, we need to add the compatible string and the respective data structure to make it work on the R40/V40 SoC. Nothing spectacular this time, just one less USB controller than the H3. Copied from the Linux kernel. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-24common: Move RAM-sizing functions to init.hSimon Glass
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Rename and move source()Simon Glass
This function has a very generic name which does not adequately describe its purpose. Rename it and move it to image.h, since it relates to reading a script from an image. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move the image globals into image.hSimon Glass
These three globals relate to image handling. Move them to the image header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24image: Rename load_addr, save_addr, save_sizeSimon Glass
These global variables are quite short and generic. In fact the same name is more often used locally for struct members and function arguments. Add a image_ prefix to make them easier to distinguish. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move reset_cpu() to the CPU headerSimon Glass
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move get_tbclk() to time.hSimon Glass
This function related to timer and most of the timer functions are in time.h, so move this function there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move clock functions into a new fileSimon Glass
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move ll_boot_init() to init.hSimon Glass
This is an init-related function so belongs in that file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Drop floppy disk supportSimon Glass
This seems pretty old now. It has not been converted to driver model and is not used by any boards. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24serial: ns16550: Use old baud rate divisor for flushing if not givenPatrik Dahlström
If baud_divisor is not set (i.e. == -1), we should use the baud divisor already in use for flushing the xmit register. If we don't flush the xmit register, then SPL will hang. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
2020-01-24remoteproc: elf_loader: fix program header parsingFabien Dessenne
Fix an issue where some sections are never loaded : if p_type is different from PT_LOAD the phdr pointer must be incremented. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Suman Anna <s-anna@ti.com>
2020-01-24drivers: net: fsl_enetc: fix SXGMII MAC configurationAlex Marginean
Separate MAC and serdes configuration, MAC configuration must be applied at each enetc_start() as FLR clears it. This restores traffic for ENETC interfaces in USXGMII mode. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: device tree fixup based on SoC andWasim Khan
lx2160a rev1 requires layerscape_gen4 device tree fixup and lx2160a rev2 requires layerscape device tree fixup. Add device tree fixup for lx2160a based on SoC and Version. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: Move streamId allocation to common device tree fixupWasim Khan
Move streamId allocation to layerscape common device tree fixup. Calculate streamId based on SoC variant. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: Common device tree fixup for NXP SoCsWasim Khan
Add Common device tree fixup for NXP SoCs. Based on SoC and revision call pcie_layerscape or pcie_layerscape_gen4 fixup. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24drivers: net: fsl_enetc: add write_hwaddr() for LS1028AMichael Walle
The LS1028A SoC is special in the handling of the MAC addresses. We need to write to the IERB version of the PSIPMAR0/1 register. This value will be sampled into the corresponding port PSIPMAR0/1 register if the PCI memory access is enabled. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24drivers: net: fsl_enetc: use write_hwaddr()Michael Walle
Intead of setting the MAC address in enetc_start() use the proper write_hwaddr(). U-Boot takes care of the random MAC address, too. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: Fix the BARs disable functionHou Zhiqiang
There is not any difference for disabling BARs in RC mode between PCIe controllers with and without SRIOV. Fixes: 80afc63fc342 ("pci: layerscape: add pci driver based on DM") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24pci: layerscape: Fix the disabling of Expansion ROM BARHou Zhiqiang
The software will still get non-zero Expansion ROM BAR size even when the BAR_EN bit is cleared. The BAR_EN bit of register EXP_ROM_BAR_MASK_RC is not working as expected, so this patch changes to mask all the bits. Fixes: 80afc63fc342 ("pci: layerscape: add pci driver based on DM") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-24drivers: net: fsl_enetc: Pass on primary MAC address to LinuxAlex Marginean
Passes on the primary address used by u-boot to Linux. The code does a DT fix-up for ENETC PFs and sets the primary MAC address in IERB. The address in IERB is restored on ENETC PCI functions at FLR. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-23gpio: bcm6345: allow to use this driver on arm bcm68360Philippe Reynes
This IP is also used on some arm SoC, so we allow to use it on arm bcm68360 too. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-23led: bcm6858: allow to use this driver on arm bcm68360Philippe Reynes
This IP is also used on some arm SoC, so we allow to use it on arm bcm68360 too. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-23nand: brcmnand: add bcm68360 supportPhilippe Reynes
This adds the nand support for chipset bcm68360. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-23spi: bcm63xx-hsspi: allow to use this driver on arm bcm68360Philippe Reynes
This IP is also used on some arm SoC, so we allow to use it on arm bcm68360 too. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-23watchdog: bcm6345: allow to use this driver on arm bcm68360Philippe Reynes
This IP is also used on some arm SoC, so we allow to use it on arm bcm68360 too. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-23mmc: s5p_sdhci: Read generic MMC properties from DTMarek Szyprowski
Read generic MMC properties from device-tree. This allows to specify for example cd-inverted property and let MMC core to properly handle such case. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-22timer: Add driver for Nomadik Multi Timer Unit (MTU)Stephan Gerhold
The Nomadik Multi Timer Unit (MTU) provides 4 decrementing free-running timers. It is used in ST-Ericsson Ux500 SoCs. The driver uses the first timer to implement UCLASS_TIMER. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-21Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Clearfog: Add run-time board detection with TLV EEPROM support (Baruch)
2020-01-21ddr: marvell: a38x: allow board specific clock out setupBaruch Siach
DDR clock out might be unrelated to the number of active chip-select. For example, the board might have two DDR components, but only one chip-select. The clk_enable mask allows the board to enable DDR clocks regardless of active chip-selects. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-20Merge tag '2020-01-20-ti-2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti K3 J721E: * DMA support. * MMC and ADMA support. * EEPROM support. * J721e High Security EVM support. * USB DT nodes K3 AM654: * Fixed boot due to pmic probe error. * USB support and DT nodes. * ADMA support DRA7xx/AM57xx: * BBAI board support * Clean up of net platform code under board/ti AM33/AM43/Davinci: * Reduce SPL size for omap3 boards. * SPL DT support for da850-lcdk * PLL divider fix for AM335x
2020-01-20clk: sci-clk: add slack to clk-set-rate passed to firmwareLokesh Vutla
Add slack to the clock frequency parameters passed to firmware within clk_set_rate. min-freq is changed to 0 and max-rate is changed to ULONG_MAX. This fixes certain issues with pll clock rounding when the firmware is not able to set the frequency exactly to the target, the current implementation fails if the available frequency is even 1Hz off the target. With the change, the firmware still tries its best to set the frequency as close as possible to the target. Reported-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20phy: omap-usb2-phy: Add support for AM654 USB2 PHYVignesh Raghavendra
AM654 SoC has USB2 PHY which is similar to existing USB2 PHYs on OMAP SoCs. Add support for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20phy: omap-usb2-phy: Fix warnings when built for ARM64Vignesh Raghavendra
Below warning is seen when this driver is built for devices with 64 bit physical address space. drivers/phy/omap-usb2-phy.c: In function ‘omap_usb2_phy_probe’: drivers/phy/omap-usb2-phy.c:187:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] priv->phy_base = (void *)base; ^ Fix this by using dev_read_addr_ptr() instead of dev_read_addr(). Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20dwc3-generic: Add support for AM654 USB controllerVignesh Raghavendra
AM654 has DWC3 USB controller that is very similar to other TI SoCs. Add a new compatible to enable the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20power: regulator: tps62360_regulator: Convert ofdata_to_platdata to the ↵Keerthy
missing probe commit 29f7d05a347a ("dm: core: Move ofdata_to_platdata() call earlier") introduces changes in the order of device_probe execution. ofdata_to_platdata now comes before the probe function which resulted in a deadlock and caused boot hang on AM6 devices. Deadlock sequence: tps62360_regulator_ofdata_to_platdata --> i2c_get_chip --> device_probe(tps62360) --> tps62360_regulator_ofdata_to_platdata Hence convert ofdata_to_platdata to the missing probe function to fix the hang. Fixes: 22e8f18980d6 ("power: regulator: tps6236x: add support for tps6236x regulators") Signed-off-by: Keerthy <j-keerthy@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20mmc: am654_sdhci: Add Support for configuring PHY in J721eFaiz Abbas
Add Support for writing to PHY registers for J721e. There are number of differences between the J721e 8 bit PHY, J721e 4 bit PHY and AM654 PHY. Create a driver_data structure with an ops and flags field and use the flags field to indicate these differences. The differences are as follows: 1. The J721e 4 bit instance PHY does not have a DLL. Introduce a DLL_PRESENT flag to make sure that DLL related registers are accessed only where they are present. Also add a separate set_ios_post() callback. 2. The J721e 8 bit instance is not muxed with anything else inside the SoC and hence the IOMUX_ENABLE filed does not exist. Add a flag which is used to indicate the presence of this field. 3. The register field used to select DLL frequency is 3 bit wide in J721e as compared to 2 bits in AM65x. Add another flag that distinguishes these fields. 4. The strobe select field is 8 bit wide as compared to 4 bit wide for AM65x. Add yet another flag to indicate this difference. Strobe select is used only for HS400 speed mode, support for which has not been added in AM65x. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20mmc: am654_sdhci: Get Xin clock by nameFaiz Abbas
Get clk_xin by name instead of by index to avoid having to put clocks in the same order in all devices. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20dma: ti: k3-udma: Fix build warnings when building for 32 bit platformsVignesh Raghavendra
Cast pointers properly so as to avoid warnings when driver is built for 32 bit platforms Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20dma: ti: k3-udma: Fix ring push operation for 32 bit coresVignesh Raghavendra
UDMA always expects 64 bit address pointer of the transfer descriptor in the Ring. But on 32 bit cores like R5, pointer is always 32 bit in size. Therefore copy over 32 bit pointer value to 64 bit variable before pushing it over to the ring, so that upper 32 bits are 0s. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20dma: ti: k3-udma: Switch to exposed ring modeVignesh Raghavendra
Exposed ring mode works well with 32 bit and 64 bit cores without need for Proxies for 32 bit cores. Therefore switch to exposed ring mode. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit (git 2.34.1) at 2024-12-27 22:44:02 +0000