summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2019-01-28m53menlo: fix addmtd cmd in default environmentOlaf Mandel
The original definition added the string mtdparts= to the Linux Kernel args twice: mtdparts=mtdparts=. Fix that. Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-01-28m53menlo: fix splashfile locationOlaf Mandel
After merging the boot partition into the root partition, the splashfile resides in the /boot subdirectory: update the default environment to reflect that. Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-01-28pico-imx7d: Add LCD supportFabio Estevam
Add support for the VXT VL050-8048NT-C01 panel connected through the 24 bit parallel LCDIF interface. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-01-28imx: Add PHYTEC phyBOARD-i.MX6UL-SeginMartyn Welch
Port for the PHYTEC phyBOARD-i.MX6UL-Segin single board computer. Based on the PHYTEC phyCORE-i.MX6UL SOM (PCL063). CPU: Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 44C Reset cause: POR Board: PHYTEC phyCORE-i.MX6UL I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial Net: FEC0 Working: - Eth0 - i2C - MMC/SD - NAND - UART (1 & 5) - USB (host & otg) Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
2019-01-26PowerPC: Stop re-using CONFIG_SPL_TEXT_BASE for TPLTom Rini
Rather than checking for CONFIG_TPL_BUILD and then re-defining CONFIG_SPL_TEXT_BASE make use of CONFIG_TPL_TEXT_BASE directly. Cc: York Sun <york.sun@nxp.com> Cc: Po Liu <po.liu@nxp.com> Cc: Qiang Zhao <qiang.zhao@nxp.com> Cc: Timur Tabi <timur@tabi.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-26Merge branch '2019-01-25-master-imports'Tom Rini
- snapdragon 820c improvements - poplar updates - DFU + SPL cleanups - Improve the mediatek mmc driver - Other minor cleanups / improvements
2019-01-26ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry pointAndrew F. Davis
Like AM33xx and AM43xx, DRA7xx and AM57xx devices may need to have an non-standard boot address in memory. This may be due to the device being a high security variant, which place the Initial SoftWare (ISW) after certificates and secure software. Allow these devices to set this from Kconfig. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-01-26spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFUAndrew F. Davis
The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT to allow for cleaner use in code. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-01-25configs: Migrate CONFIG_DFU_MMC againTom Rini
A few platforms recently added in CONFIG_DFU_MMC under include/configs rather than via the defconfig, update them. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-25Merge tag 'arc-fixes-for-2019.04-rc1' of git://git.denx.de/u-boot-arcTom Rini
A couple of trivial fixes and improvements for ARC Most notable are: * Move of ENV_SIZE/ENV_OFFSET to Kconfig * Fix with private structure allocation for arc_uart * Definition of CONFIG_SYS_CACHELINE_SIZE useful for building drivers
2019-01-25ARC: Move ENV_SIZE and ENV_OFFSET to KconfigAlexey Brodkin
Join the party of some ARM boards and drop more items from include/configs/xxx.h. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-25serial: Get rid of CONFIG_DW_SERIALAlexey Brodkin
CONFIG_DW_SERIAL is no longer used anywhere so let's forget about it. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Tom Rini <trini@konsulko.com> Cc: Adam Ford <aford173@gmail.com> Cc: Mario Six <mario.six@gdsys.cc> Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: "Jorg Krause" <joerg.krause@embedded.rocks> Cc: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-24Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2019-01-24ARM: zynq: Disable i2c for Zybo/Zybo Z7Michal Simek
There is no i2c connected in base DT that's why disable I2C commands. Also remove zynq_zybo which is not needed now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm: zynq: Enable CONFIG_REMAKE_ELFSiva Durga Prasad Paladugu
This patch enables CONFIG_REMAKE_ELF for Zynq platform so that it generates u-boot.elf from binary which works for all Zynq boards with OF_SEPARATE option enabled. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-23MSCC: Add support for Serval SoC family.Horatiu Vultur
As Ocelot, Servalt, Luton and Jaguar2, this family of SoCs are found in Microsemi Switches solution. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-21Merge git://git.denx.de/u-boot-marvellTom Rini
- Sync Armada-38x dts with Linux 4.20 from Chris - Misc changes and enhancements to Turris Mox (v4) from Marek - Reserve PSCI area for Armada 8k from Heinrich - New Allied Telesis x530 board (Armada-385) from Chris - Misc minor changes (defconfig etc)
2019-01-21ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to KconfigDerald D. Woods
This commit converts the following items to Kconfig: CONFIG_ATMEL_NAND_HWECC CONFIG_ATMEL_NAND_HW_PMECC CONFIG_PMECC_CAP CONFIG_PMECC_SECTOR_SIZE CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER [PMECC References] https://www.at91.com/linux4sam/bin/view/Linux4SAM/PmeccConfigure https://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91Bootstrap [Mailing List Thread] https://lists.denx.de/pipermail/u-boot/2018-December/350666.html Fixes: 5541543f ("configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment") [trini: Make the migration be size neutral and possibly not fix the above in all cases] Reported-by: Daniel Evans <photonthunder@gmail.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-21ARM: mvebu: add support for Allied Telesis x530Chris Packham
This is a range of stackable network switches. The SoC is Armada-385 and there are a number of variants with differing network port configurations. The DP variants are intended for a harsher operating environment so they use a different i2c mux and fit industrial-temp parts. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-21arm: mvebu: configs: turris_mox: Add 64 MiB of boot memoryMarek Behún
This is needed for some scenarios, such as booting large FIT image. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-01-19Kconfig: Migrate BOUNCE_BUFFERPhilipp Tomsich
The bounce buffer is used by a few drivers (most of the MMC drivers) to overcome limitations in their respective DMA implementation. This moves the configuration to Kconfig and makes it user-selectable (even though it will be a required feature to make those drivers work): the expected usage is for drivers depending on this to 'select' it unconditionally from their respective Kconfig (see follow-up patches). This commit includes a full migration using moveconfig.py to ensure that each commit compiles. To ensure bisectability we update dependencies of various drivers to now select BOUNCE_BUFFER when needed. [trini: Squash all patches to ensure bisectability] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> [dw_mmc portion] Reviewed-by: Fabio Estevam <festevam@gmail.com> [mxsmmc portion] Reviewed-by: Simon Glass <sjg@chromium.org> [tegra portion]
2019-01-18Merge tag 'fsl-qoriq-for-v2019.04-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Add TFA boot flow for more boards Add TFA boot defconfig for ls1088a and ls2088a. Add dts fixup for PCIe endpoint and root complex.
2019-01-18sunxi: usb: Switch to Generic host controllersJagan Teki
Onc of key blocker for using USB Generic host controller drivers in Allwinner are CLK and RESET drivers, now these available for USB usage. So switch sunxi USB use EHCI and OHCI Generic controllers. Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD where it already have USB_EHCI_HCD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18adding saveenv-command for bananapi r2Frank Wunderlich
bananapi r2 can be booted from sd-card and emmc saving the environment have to choose the storage from which the device has booted also the offset is set to 1MB to make sure env is written to block "user data area" between uboot and first partition https://www.fw-web.de/dokuwiki/lib/exe/fetch.php?cache=&media=bpi-r2:boot-structure.png Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-01-17Merge tag 'mips-pull-2019-11-16' of git://git.denx.de/u-boot-mipsTom Rini
- MIPS: mscc: various enhancements for Luton and Ocelot platforms - MIPS: mscc: added support for Jaguar2 platform - MIPS: optimised SPL linker script - MIPS: bcm6368: fix restart flow issues - MIPS: fixed CONFIG_OF_EMBED warnings for all MIPS boards - MIPS: mt7688: small fixes and enhancements - mmc: compile-out write support if disabled
2019-01-17armv8: ls2088aqds: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls2088aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls2088ardb: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls2088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT - remove EL3 specific erratas for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls1088aqds: Add TFABOOT supportPankit Garg
TFABOOT support includes: - ls1088aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - MC address changes for TFABOOT - define BOOTCOMMAND for TFABOOT - ifc chip select changes for TFABOOT Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls1088ardb: Add TFABOOT supportPankit Garg
TFABOOT support includes: - ls1088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - MC address changes for TFABOOT - define BOOTCOMMAND for TFABOOT - ifc chip select changes for TFABOOT Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17ls1043a: add support for nand-boot cmd for TFAPankit Garg
Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-16mips: mscc: luton+ocelot: Remove board config options, do probingLars Povlsen
As we are moving to multi-dtb and board detection, remove static board config options, and introduce board probing instead. Luton: This add single-binary support for the two MSCC luton-based reference boards - pcb090 and pcb091. The SoC chip ID is used to determine the board type. Ocelot: This add single-binary support for the two MSCC ocelot-based reference boards - pcb120 and pcb123. The PHY ids on specific ports are used to determine the board type. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-15Merge git://git.denx.de/u-boot-riscvTom Rini
1. Improve cache implementation. 2. Fix and improve standalone applications
2019-01-15omap3: igep00x0: Remove USB support due DM_USB deadlineEnric Balletbo i Serra
The USB support for this board was never really tested, in fact, the presence of these options are more a copy & paste error from the Beagleboard than a feature that really was used. As doesn't work, remove for now. If someone at some point want to add this support he'll need to migrate the board to use CONFIG_DM_USB instead. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-15riscv: qemu: define standalone load addressLukas Auer
We need to define the standalone load address to use standalone application on qemu-riscv. Define it and set it equal to CONFIG_SYS_LOAD_ADDR. To not overwrite it, change the assigned of CONFIG_STANDALONE_LOAD_ADDR in arch/riscv/config.mk to a conditional one. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-01-14include: configs: Add gunzip size for HiKey boardManivannan Sadhasivam
Default 8MB gunzip size is not enough to load the release kernel, hence fix 64MB size for uncompressing the kernel. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-14arm: MediaTek: add ethernet support for MT7629 boardsWeijie Gao
Enable ethernet related configs to mt7629_rfb_defconfig. Add default IP addresses. Enable noncached memory region required by ethernet driver. Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
2019-01-14arm: MediaTek: add ethernet support for MT7623 boardsWeijie Gao
Enable ethernet related configs to mt7623n_bpir2_defconfig. Add default IP addresses. Enable noncached memory region required by ethernet driver. Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
2019-01-14imx8mq_evk_defconfig: Move file system options to KconfigFabio Estevam
Chris Spencer reports that when enabling ext4 read support without also enabling write support the following error is seen: fs/fs.c:198:12: error: 'ext4_write_file' undeclared here (not in a function); did you mean 'ext4_read_file'? .write = ext4_write_file, ^~~~~~~~~~~~~~~ Fix this problem by moving these options to Kconfig. Reported-by: Chris Spencer <spencercw@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-01-14poplar: save environment at a different offsetAlex Elder
Change CONFIG_ENV_OFFSET for Poplar to be 1MB further into the eMMC than before. This puts it immediately prior to the space we are reserving offset 0x200000-0x400000 for UEFI to save its persistent data. Define CONFIG_ENV_SIZE as a product of env_mmc_nblks and the sector size, like CONFIG_ENV_OFFSET is. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-01-09board: tbs2910: Add u-boot.imx size limit checkSoeren Moch
Check the size of the generated u-boot.imx file. Report an error if it would be too big and overwrite the u-boot environment. Signed-off-by: Soeren Moch <smoch@web.de>
2019-01-09arm: mx5: Enable WDT and bootcounter on M53MenloMarek Vasut
Enable watchdog and bootcounter support on the M53Menlo board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2019-01-06Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2019-01-01Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini
imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
2019-01-01pico-imx7d: Increase the CONFIG_ENV_OFFSET sizeFabio Estevam
U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" causes U-Boot to hang because of this overlap. Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-01-01pcm058: fix NAND flash not using badblock tableHarald Seiler
Currently, U-Boot ignores the BBT stored in the last 4 blocks of NAND flash because the NAND_BBT_USE_FLASH flag is not set. This leads to two issues: * U-Boot silently uses a memory-only BBT which is initialized with all blocks marked as good. This means, actual bad blocks are marked good and U-Boot might try writing to or reading from them. * The BBT in flash, which will be created once Linux boots up, is not off limits for a driver ontop, like UBI. While it does not seem to consistently produce an error, sometimes UBI will fail to attach because the BBT blocks obviously don't contain valid UBI data. To fix this, this patch sets the CONFIG_SYS_NAND_USE_FLASH_BBT option, which is used in ./drivers/mtd/nand/raw/mxs_nand.c to decide whether a BBT in flash is used. Signed-off-by: Harald Seiler <hws@denx.de>
2019-01-01imx: add i.MX8MQ EVK supportPeng Fan
Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to DRAM. The boot log with Arm trusted firmware console enabled: " U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 NOTICE: Configureing TZASC380 NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty NOTICE: BL31: Built : 09:28:54, Nov 8 2018 lpddr4 swffc start NOTICE: sip svc init U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz Reset cause: POR Model: Freescale i.MX8MQ EVK DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 using MAC address from ROM eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 " Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-01-01embestmx6boards: Add SPL supportFabien Lahoudere
In order to boot faster with falcon mode, we need to add SPL support to riotboard. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-12-31Merge git://git.denx.de/u-boot-x86Tom Rini
This includes x86 edison defconfig file clean up, and coreboot file system (cbfs) fixes.
2018-12-31x86: edison: Remove staled comments from configuration headerAndy Shevchenko
Since some options had been moved to defconfig from header, the leftover comments are not needed anymore. Remove them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-31x86: edison: move CONFIG_BOOTCOMMAND from header file to defconfigAndy Shevchenko
Use defconfig instead of header file for CONFIG_BOOTCOMMAND. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-11 00:42:22 +0000