summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2019-04-05Merge tag 'u-boot-imx-20190405' of git://git.denx.de/u-boot-imxTom Rini
Fixes for 2019.04 - fix bashism for MX8 - fix ethernet for MX53 - fix docs for i.MX8
2019-04-02cosmetic: Remove not needed string from kp_imx53.h configLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-02cosmetic: config: Remove empty #ifdefsLukasz Majewski
After running tools/moveconfig.py it turned out that for various boards there are an empty #ifdef statements. Remove them to clean u-boot source code. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-01Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
Minor fixes for the Alt board and PHY use on Gen2.
2019-03-31ARM: imx6q_logic: Enable UUID supportAdam Ford
With UUID support, the root can now point to UUID. This makes swiching between mmc 0 and mmc 1 easier by simplying changing mmcdev between 0 and 1. From there, the scripts handle the rest. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-31Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-03-30ARM: rmobile: rcar-gen2: Activate bootm_sizeMarek Vasut
Commit d245059ff797 ("ARM: rmobile: rcar-gen3: Activate bootm_size") only fixed the superfluous CONFIG_SYS_BOOTMAPSZ for R-Car Gen3, even though it listed all affected boards. Apply the same fix to Gen2. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Fixes: d245059ff797 ("ARM: rmobile: rcar-gen3: Activate bootm_size") Cc: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-03-29configs: ti: Move FIT image load address to avoid overwriteAndrew F. Davis
The FIT image is loaded to 0x8700_0000 followed by extracting from that several large images also into the 0x8x00_0000 range. Large images can end up overwriting the FIT image as it is being extracted from. Move the FIT load address clear out to 0x9000_0000, this will require a board to have at least 256MB of DRAM, if less then more careful planning will be required for that platform. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-03-28ARC: AXS10x: drop NAND supportEugeniy Paltsev
On AXS10x boards we have non-standard NAND controller which was never really used a lot as there're other much more convenient [as they are standard & removable] persistent media like SD-card and USB mass storage. Moreover after recent changes we face with some NAND controller runtime issues. So instead of keeping support of yet another non-standard peripheral we're dropping its support for good. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-03-25Convert CONFIG_ENV_SPI_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25Convert CONFIG_DEFAULT_SPI_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_DEFAULT_SPI_BUS CONFIG_DEFAULT_SPI_MODE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASEPatrick Delaunay
Replace CONFIG_ENV_SPI_BASE by the better CONFIG_SYS_SPI_BASE (it is not the location for environment but the location for U-Boot) and, as it is the only platform with use this define, remove it from whitelist. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25controlcenterdc: move some configuration in defconfig filePatrick Delaunay
Move some configurations in defconfig file - CONFIG_CMD_I2C - CONFIG_CMD_SPI This allow correct dependency handling in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25bcm7445: move some configuration in defconfig filePatrick Delaunay
Move some configurations in defconfig file - CONFIG_DM_SPI (removed by syncing defconfigs ) - CONFIG_CMD_SF - CONFIG_CMD_SPI - CONFIG_CMD_SF_TEST This allow correct dependency handling in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-19Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2019-03-16arm: socfpga: make SPL_TEXT_BASE overridableSimon Goldschmidt
To boot from fpga on socfpga gen5, we need to set CONFIG_SPL_TEXT_BASE to 0xC0000000 (hps2fpgaslaves base address). Since converting CONFIG_SPL_TEXT_BASE to Kconfig hasn't been successful so far, let's make this value overridable in socfpga_common.h, so that we can have different board configs override this in socfpga_common.h. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-03-15Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
- DPAA2 fixes and DDR errata workaround for LS1021A
2019-03-15armv7: ls102xa: Add workaround for DDR erratum A-008850Alison Wang
Barrier transactions from CCI400 need to be disabled till the DDR is configured, otherwise it may lead to system hang. The patch adds workaround to fix the erratum. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15mc : Reduce MC memory size to 128MMeenakshi Aggarwal
ls2088, ls1088 : minimum MC Memory size is 128 MB lx2 : minimum MC memory size is 256 MB Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-14board: tbs2910: Fix default environmentSoeren Moch
Especially fix usb keyboard support. Other changes are only for beautification. Signed-off-by: Soeren Moch <smoch@web.de>
2019-03-14Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2019-03-13ARM: imx6_logic: Fix typo in FDT addressAdam Ford
A few scripts reference 'fdt_addr' when they should reference 'fdt_addr_r' so this patch fixes those broken references. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13include: configs: imx6-engicam: Add recovery boot optionShyam Saini
Combined with watchdog board reset mechanism, this can be used as recovery boot option after bootlimit exceeds the configured value. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to KconfigFabio Estevam
Currently the command "saveenv" is not available. The CONFIG_ENV_IS_IN_MMC symbol has been converted to Kconfig, so fix the problem by moving it to the defconfig. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13pico-imx6ul: Convert to DM_PMICFabio Estevam
Convert to use DM_PMIC for the PFUZE3000. Since this PMIC is under an I2C bus, conver to DM_I2C as well. Also, since I2C is not used in SPL, remove CONFIG_SPL_I2C_SUPPORT to avoid build warnings. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-11espresso7420: remove duplicated configMinkyu Kang
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: exynos: Remove duplicated "boardname" env settingKrzysztof Kozlowski
Various places in the code set "boardname" env property. It was used for booting from ITB images and choosing proper DTB file name. Instead of duplicating it, use existing U-Boot wide - "board_name". Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11configs: odroid_xu3: Unify indentationKrzysztof Kozlowski
File mixed space and tab indentation. Unify it. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11configs: odroid_xu3: Use consistent syntax for #includeKrzysztof Kozlowski
When including other header from configs, use consistent <> syntax. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-10Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Arria10 DRAM fixes and Gen5 cache fixes
2019-03-09ARM: socfpga: Fix Arria10 SPI and NAND U-Boot offsetMarek Vasut
The SPL size on Gen5 is 4*64kiB, but on A10 it is 4*256kiB. Handle the difference. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ARM: socfpga: Drop CONFIG_SYS_NAND_BAD_BLOCK_POSMarek Vasut
This is not used anywhere, so drop it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ARM: socfpga: Disable D cache in SPLMarek Vasut
The bootrom seems to leave the D-cache in messed up state, make sure the SPL disables it so it can not interfere with operation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ARM: rmobile: rcar-gen3: Activate bootm_sizeEugeniu Rosca
v2019.01 commit 07a8060a1277 ("ARM: rmobile: Convert to bootm_size") attempted converting to bootm_size of 256 MiB below targets: - include/configs/alt.h - include/configs/gose.h - include/configs/koelsch.h - include/configs/lager.h - include/configs/porter.h - include/configs/rcar-gen3-common.h - include/configs/silk.h - include/configs/stout.h The update didn't fully work on R-Car3 due to the CONFIG_SYS_BOOTMAPSZ=8MiB definition left by v2016.09 commit e525d34b476e ("ARM: rmobile: Add support salvator-x board"), which is explained in below README excerpt: ----8<---- CONFIG_SYS_BOOTMAPSZ: [..] If CONFIG_SYS_BOOTMAPSZ is undefined, then the value in "bootm_size" will be used instead. ----8<---- Allow the original commit to accomplish its purpose on R-Car3 targets by removing the CONFIG_SYS_BOOTMAPSZ definition. Fixes: 07a8060a1277 ("ARM: rmobile: Convert to bootm_size") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-03-09ARM: rmobile: Convert Gen2 Stout, Porter, Silk to DM_SPI{,_FLASH}Marek Vasut
Enable DM_SPI and DM_SPI_FLASH in U-Boot on H2 Stout, M2W Porter and E3 Silk. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-08ARM: qemu-arm: enable USB boot in distro boot with UEFIAKASHI Takahiro
With this patch which adds a removable USB mass storage to a list of bootable devices, USB boot is supported in distro boot if UEFI is configured. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-03-03board: Enable DHCP distro boot for LS1012a, LS1021aYunfeng Ding
Enable DHCP distro boot for Layerscape LS1012A and LS1021A. Signed-off-by: Yunfeng Ding <yunfeng.ding@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03configs: fsl: move DDR specific defines to KconfigRajesh Bhagat
Moves below DDR specific defines to Kconfig: CONFIG_FSL_DDR_BIST CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE CONFIG_FSL_DDR_INTERACTIVE CONFIG_FSL_DDR_SYNC_REFRESH Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1043a: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1043a: enable dhcp bootMian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box on these platforms. Enable it as a boot source. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1046a: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1046a: enable dhcp bootMian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box on these platforms. Enable it as a boot source. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls2080ardb: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03Revert "ls2080ardb: remove dhcp function from env as boot source"Mian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box for ls2088a platforms. Moreover, no solid reason is given for disabling it. Revert the patch to re-enable it. This reverts commit aea5cd75e63c20de4c00ce24a93eeee8542f923e. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1088ardb: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03Revert "ls1088a: remove dhcp function from u-boot env as boot source"Mian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box for ls1088a platforms. Moreover, no solid reason is given for disabling it. Revert the patch to re-enable it. This reverts commit 863e42e8b1f9e97d87919e20e34a7b98089f7522. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-27riscv: Add SiFive FU540 board supportAnup Patel
This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-22preboot: Introduce CONFIG_USE_PREBOOT and migrate CONFIG_PREBOOTMasahiro Yamada
This is the same migration path as commit b6251db8c3f0 ("Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND"). I also moved the description in README to the Kconfig help. I ripped off the sentence about 'LWMON' since it is gone already. I only let my boards migrate, leaving the rest to platform maintainers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-20Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
generated by cgit (git 2.34.1) at 2025-02-02 08:50:15 +0000