summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2014-01-08sh: sh2: Change CONFIG_SYS_HZ to CONFIG_SH_CMT_CLK_FREQNobuhiro Iwamatsu
CONFIG_SYS_HZ of SH2 is not used as frequency of base timer. This is the correct clock of CMT. This changes from CONFIG_SYS_HZ to CONFIG_SH_CMT_CLK_FREQ, in order to use CONFIG_SYS_HZ as clock of CMT. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2014-01-08sh: sh4: remove CONFIG_SH4 definition from board configNobuhiro Iwamatsu
CONFIG_SH4 was already defined in arch/sh/sh4/config.mk. This removes CONFIG_SH4 from board config files of SH4. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-01-08sh: sh3: remove CONFIG_SH3 definition from board configNobuhiro Iwamatsu
CONFIG_SH3 was already defined in arch/sh/sh3/config.mk. This removes CONFIG_SH3 from board config files of SH3. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-01-08sh: sh2: remove CONFIG_SH2 definition from board configNobuhiro Iwamatsu
CONFIG_SH2 was already defined in arch/sh/sh2/config.mk. This removes CONFIG_SH2 from board config files of SH2. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-01-08sh: delete redundant CONFIG_SH definitionMasahiro Yamada
CONFIG_SH is defined in arch/sh/config.mk. It is not necessary to define it in each board header config header file. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-01-07arm: omap: cm_t35: enable gpio bank 5 clocks explicitlyNikita Kiryanov
Following commit "arm: omap3: Enable clocks for peripherals only if they are used" (f33b9bd3984fb11e1d8566a866adc5957b1e1c9d) it is now necessary to enable clocks for GPIO banks explicitly. On cm_t35, GPIO bank 5 is necessary for scf0403 lcd support. Enable GPIO bank 5 clocks. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2014-01-07ARM: twister: add missing gpio clock initJeroen Hofstee
Commit f33b9bd3984fb11e1d8566a866adc5957b1e1c9d breaks boards which do not explicitly enable the gpio clocks. This causes the twister spl to hang, since it uses the no longer enabled gpio 55. Add CONFIG_OMAP3_GPIO_2 to unbrick the board. Cc: Stefano Babic <sbabic@denx.de> Cc: Tapani Utriainen <tapani@technexion.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Stefano Babic <sbabic@denx.de>
2014-01-07ARM: tam3517-common: fix nand spl bootJeroen Hofstee
commit f9095aac793aa8917ab9b915c5d449e6dc8d3d30, "mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme" removed CONFIG_SPL_NAND_SOFTECC from the tam3517 common config, causing the spl nand boot to fail. Add it back, so derived boards boot again. Cc: Pekon Gupta <pekon@ti.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Raphael Assenat <raph@8d.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tapani Utriainen <tapani@technexion.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Stefano Babic <sbabic@denx.de>
2014-01-07TI:omap3: Drop omap3_zoom2Tom Rini
The omap3_zoom2 board has not been updated for a correct CONFIG_SYS_HZ and Tom Rix's email has long been bouncing. Signed-off-by: Tom Rini <trini@ti.com>
2014-01-07cam_enc_4xx: Set CONFIG_SYS_NAND_MAX_OOBFREE / CONFIG_SYS_NAND_MAX_ECCPOSTom Rini
With the changes to make OOBFREE/ECCPOS configurable but default to larger, we need to set these config options for the space savings they provide. Cc: Scott Wood <scottwood@freescale.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
2014-01-06Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2014-01-06arm/km: fix i2c mux define for km_kirkwood_128m16 targetHolger Brunck
Due to the i2c mux rework in u-boot we now have only to specify the busnumber and not the whole mux configuration. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de>
2014-01-06arm/km: add support for km_kirkwood_128m16 boardKarlheinz Jerg
The board is similar to the standard km_kirkwood board. From a u-boot point of view, the only difference is an increased 256 MiB DRAM (128M16). A board based on this design is for example the SUP12. Signed-off-by: Karlheinz Jerg <karlheinz.jerg@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
2014-01-06kirkwood: ib62x0: use device tree and update configLuka Perkov
Signed-off-by: Luka Perkov <luka@openwrt.org> CC: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
2014-01-06Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD
2014-01-06Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
Conflicts: include/micrel.h The conflict above was trivial, caused by four lines being added in both branches with different whitepace.
2014-01-03ARM: mx6: Change the FDT loading address to avoid overlapingOtavio Salvador
This patch fixes allow for the DeviceTree and initrd relocation fixing the boot of FSL 3.10.9-1.0.0-alpha kernel. This changes following boards: - mx6sabreauto - mx6sabresd - wandboard - udoo - nitrogen6x - cgtqmx6eval The reasoning, as explained by Hui Liu, is: ,---- | The FDT blob will be placed at DDR physical addr: 0x11000000. When Linux kernel | Boot up, it will decompress the compressed kernel image and place the decompressed | kernel image at the low end of the DDR memory and start running from it. If the | decompressed kernel image is bigger for example than 16M, it may over written the | fdt blob which u-boot loaded to the DDR memory @0x11000000 with fdt_addr=0x11000000 | | To expand the fdt_addr from 0x11000000 to 0x18000000, which can avoid the override | Since we will not likely have one kernel image larger than 128MB. `---- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
2014-01-03mx28evk: Extend environment to easy write of NAND systemOtavio Salvador
This adds following new targets: - update_nand_kernel - update_nand_fdt - update_nand_filesystem and to avoid confusion, the 'update_nand_full' has been renamed to 'update_nand_firmware_full'. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2014-01-03mx28evk: Add 'nandboot' environment commandOtavio Salvador
This reads the kernel, ftd and boot into ubifs filesystem. While on that, the SD firmware filename definition has been moved next to the other SD related commands. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-01-03mx28evk: Use 512k for fdt partition to align itOtavio Salvador
Using 512k for fdt partition allow it to be aligned with the other small partitions and 512k erase block size. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
2014-01-02board/t1040qds: Enable memory reset controlPrabhakar Kushwaha
Define QIXIS_RST_FORCE_MEM to reset on-board DDR-DIMM before start accessing it. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2014-01-02powerpc/cms700: limit NAND data structure sizeScott Wood
This fixes a build break due to excessively large NAND data structures. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2014-01-02powerpc/B4860QDS: Define new nand_ecclayout structure macrosYork Sun
Define CONFIG_SYS_NAND_MAX_ECCPOS and CONFIG_SYS_NAND_MAX_OOBFREE to reduce the image size, by taking advantage of the new nand_ecclayout structure. Signed-off-by: York Sun <yorksun@freescale.com> CC: Prabhakar Kushwaha <prabhakar@freescale.com> CC: Scott Wood <scottwood@freescale.com>
2014-01-02powerpc/P1022DS: Define new nand_ecclayout structure macrosYork Sun
Define CONFIG_SYS_NAND_MAX_ECCPOS and CONFIG_SYS_NAND_MAX_OOBFREE to reduce the image size, by taking advantage of the new nand_ecclayout structure. Signed-off-by: York Sun <yorksun@freescale.com> CC: Prabhakar Kushwaha <prabhakar@freescale.com> CC: Scott Wood <scottwood@freescale.com>
2014-01-02board/t1040qds: Relax IFC FPGA timingsPrabhakar Kushwaha
Current IFC-FPGA TCH(Chip Select hold time with respect to WE deassertion) is 0 i.e. 0 ns hold time on writes. This may not work on higher clock freqencies. So, Increase TCH as 0x8 i.e. 8 ip_clk. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2014-01-02board/freescale:Remove use of CONFIG_SPL_NAND_MINIMALPrabhakar Kushwaha
CONFIG_SPL_NAND_MINIMAL should not be used as it was defined for temporary review purpose. So, use CONFIG_SPL_NAND_BOOT config. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2014-01-02mx6: soc: Add the required LDO ramp up delayFabio Estevam
When changing LDO voltages we need to wait for the required amount of time for the voltage to settle. Also, as the timer is still not available when arch_cpu_init() is called, we need to call it later at board_postclk_init() phase. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-01-02mx6sabre_common.h: Add CONFIG_CMD_FUSE supportFabio Estevam
Add CONFIG_CMD_FUSE option, so that the fuse API can be used. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-12-31board:trats2: fix default partitions and mmc envPiotr Wilczek
This patch add uuid disk to defualt partions necessary to restore gpt partitions and fixes mmcdev environmental variable. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30SPL: EXYNOS: Prepare for variable size SPL supportRajeshwari Birje
When variable size SPL is used, the BL1 expects the SPL to be encapsulated differently: instead of putting the checksum at a fixed offset in the SPL blob, prepend the blob with a header including the size and the checksum. The enhancements include - adding a command line option, '--vs' to indicate the need for the variable size encapsulation - padding the fixed size encapsulated blob with 0xff instead of random memory contents - do not silently truncate the input file, report error instead - no need to explicitly closing files/freeing memory, this all happens on exit; removing cleanups it makes code clearer - profuse commenting - modify Makefile to allow enabling the new feature per board Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30Config: Add initial config for SMDK5420Rajeshwari Birje
Adding initial config for SMDK5420 to build and boot U-Boot over Exynos based SMDK5420. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30Exynos5420: Add base patch for SMDK5420Rajeshwari Birje
Adding the base patch for Exynos based SMDK5420. This shall enable compilation and basic boot support for SMDK5420. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30EXYNOS5: Create a common board fileRajeshwari Birje
Create a common board.c file for all functions which are common across all EXYNOS5 platforms. exynos_init function is provided for platform specific code. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-20PowerPC: Drop linkstation_HGLAN supportTom Rini
With changes to the rtl8169 ethernet to improve cache support, we have needed additional cache functions for mpc8245. As the board maintainer has been unresponsive, remove this board. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Tom Rini <trini@ti.com>
2013-12-19Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2013-12-19config: dra7_evm: Add Bank Address Register(BAR) configPoddar, Sourav
Add config to support bank address register. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Yebio Mesfin <ymesfin@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-12-18ARM: AM43XX: board: add support for reading onboard EEPROMSekhar Nori
Add support for reading onboard EEPROM to enable board detection. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-12-18ARM: AM43xx: Add extra ENV settingsLokesh Vutla
Add Extra env settings. This is derived from am335x Extra ENV settings. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-12-18ARM: AM43xx: Add L2 SupportLokesh Vutla
AM4372 uses PL310 L2 Cache. Enable the configs for the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-12-18ARM: AM43xx: Adapt to ti_armv7_common.h config fileLokesh Vutla
Use ti_armv7_common.h config file to inclde the common configs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-12-18arm: omap3: Fix beagleboard SPL boot hangup (GPIO clocks not enabled)Stefan Roese
Patch f33b9bd3 [arm: omap3: Enable clocks for peripherals only if they are used] breaks SPL booting on Beagleboard. Since some gpio input's are read to detect the board revision. But with this patch above, the clocks to the GPIO subsystems are not enabled per default any more. The GPIO banks need to be configured specifically now. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Michael Trimarchi <michael@amarulasolutions.com>
2013-12-18Merge remote-tracking branch 'u-boot-pxa/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-12-18Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-12-18ARM: pxa: Fix CONFIG_SYS_HZ on PXAMarek Vasut
The PXA incorrectly uses CONFIG_SYS_HZ, which should be 1000 across U-Boot. Fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2013-12-18ARM: trats: dfu: Enable default Poll Timeout for Trats boardLukasz Majewski
Provide default Poll Timeout value for Trats board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2013-12-18ARM: tegra: Add the Tamonten™ NG Evaluation Carrier boardAlban Bedel
Add support for the new Tamonten™ NG platform from Avionic Design. Currently only I2C, MMC, USB and ethernet have been tested. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-12-18ARM: config: USB: Tegra30/114: Fix EHCI timeout issue on "bootp"Jim Lin
Fix the timeout issue after running "bootp" command in u-boot console. For example you see "EHCI timed out on TD- token=0x...". TXFIFOTHRES bits of TXFILLTUNING register should be set to 0x10 after a controller reset and before RUN bit is set (per technical reference manual). Signed-off-by: Jim Lin <jilin@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-12-18arm: pxa: update LP-8x4x to boot DT kernelSergei Ianovich
DT kernel requires CONFIG_OF_LIBFDT. 'bootm' needs to know DT location. In addition, fix kernel console device and enable U-Boot long help. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
2013-12-18arm: pxa: fix 2nd flash chip address on LP-8x4xSergei Ianovich
Initial configuration has worng address of the second chip. There is an alias for the 1st chip at 0x02000000 in earlier verions of LP-8x4x, so the boot normally. However, new LP-8x4xs have a bigger 1st flash chip, and hang on boot without this patch. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
2013-12-18arm: pxa: fix LP-8x4x USB supportSergei Ianovich
Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
generated by cgit (git 2.34.1) at 2024-12-30 20:05:02 +0000