summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2020-03-31Merge tag 'efi-2020-04-rc5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc5 This series fixes: * UEFI Python tests CONFIG_OF_CONTROL=y. * int to pointer cast warning for cmd/efidebug.c * memory reservation even if fdt node is disabled Now that the Python test is fixed reintroduce the reverted patch for vexpress_ca9x4 to enable EFI_LOADER and define the dtb file name.
2020-03-31configs: socfpga: Change to use SOCFPGA_PHYS_OCRAM_SIZE macroLey Foon Tan
Change to use SOCFPGA_PHYS_OCRAM_SIZE macro for onchip RAM size. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-03-30configs: lx2160a: Access flash memory as per spi-memKuldeep Singh
MC_INIT and BOOT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: ls1012afrwy: adjust env kernel_addr_rBiwen Li
Adjust environment kernel_addr_r from 0x96000000 to 0x92000000 to fix a bug that failed to boot kernel for ls1012afrwy with 512MiB RAM, => tftpboot $kernel_addr_r Image (Image size is 36 MiB) TFTP error: trying to overwrite reserved memory... Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: ls1021a: Append othbootargs to bootargsAlison Wang
This patch appends othbootargs to bootargs for LS1021ATWR board. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30dm: arm64: ls1046a: add i2c DM supportBiwen Li
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1046A Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30dm: arm64: ls1043a: add i2c DM supportBiwen Li
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1043A Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: ls1012afrwy: fix wrong env of boardBiwen Li
Fix wrong environment variable of board for ls1012afrwy Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30armv8: ls1028a: clean up the environment variablesYuantian Tang
Move the environment variables from command head file to ls1028ardb specific head file so that they will not mess up with ls1028aqds board. Also updated some variable slightly. There is no function change by this patch. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30armv8: ls1028aqds: add some environmentsYuantian Tang
Add sd and emmc bootcmd environments to facilitate the boot process. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: ls2080aqds: support distro bootBiwen Li
Add support of distro boot for ls2080aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: ls1088aqds: support distro bootBiwen Li
Add support of distro boot for ls1088aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30include/configs: ls1012afrwy: fix load address of itb with bootm commandBiwen Li
The old load address of itb will overwrite uboots reserved memory on ls1012afrwy with 512 MiB ram Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30lx2160a: Add dhcp in boot_targetsMeenakshi Aggarwal
Add dhcp in supported boot_targets for lx2160. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30armv8: ls1028a: add dhcp boot target deviceYuantian Tang
Add DHCP boot target device to enable command bootcmd_dhcp. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30lx2160a : Remove default VID settingMeenakshi Aggarwal
Set VID to 800 mV for Rev1 and set VID as per switch settings for Rev2. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30armv8: ls1028a: Update secure boot headers offsetPriyanka Singh
Update the secure boot headers offsets of Kernel and other firmware images for SD and XSPI boot sources used by esbc_validate command. Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30lx2160a : Add emmc in boot_targets environment variableMeenakshi Aggarwal
Add emmc in supported boot_targets and Add bootcmd environment variable for emmc boot. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30arm64: ls1046a: remove fdt_high environment variableYuantian Tang
Setting fdt_high and initrd_high to 0xffffffffffffffff leads to various difficulty to resolve bugs. Remove them and use bootm_size instead to safely contain a kernel, device tree and initrd for relocation. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30arm64: ls1028a: remove fdt_high environment variableYuantian Tang
Setting fdt_high and initrd_high to 0xffffffffffffffff leads to various difficulty to resolve bugs. Remove them and use bootm_size instead to safely contain a kernel, device tree and initrd for relocation. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30ls1021a: Set CONFIG_SYS_BOOTMAPSZ to the memory for relocationAlison Wang
This patch sets CONFIG_SYS_BOOTMAPSZ to the amount of memory available to safely contain a kernel, device tree and initrd for relocation. The way to set fdt_high as 0xffffffff to disable device tree relocation is removed. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-28vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.Kristian Amlie
EFI was disabled in f95b8a4b5f64f because of the missing DTB file, and indeed, the DTB file is required to load recent versions of GRUB (2.04) correctly. Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2020-03-27Revert "vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader."Tom Rini
Currently this causes failures of the platform when running the EFI loader tests, so disable it for now. This reverts commit af827140e5965e5bb2bcad1c53ca8419b428ff6d. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-26Merge tag 'u-boot-rockchip-20200327' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fixed for rv1108 and elgin-rv1108 board - Fix the keyboard from USB instead of CrOS EC
2020-03-26rockchip: Change keyboard input from CrOS EC keyboard to a USB keyboardPeter Robinson
These boards aren't ChromeOS devices so won't have a cros-ec-keyb input as it's the keyboard available via the ChromeOS Embedded Controller. Update them to use a USB keyboard which would actually be available. Also enable the usb keyboard option for those devices that don't have it enabled already. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-23vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.Kristian Amlie
EFI was disabled in f95b8a4b5f64f because of the missing DTB file, and indeed, the DTB file is required to load recent versions of GRUB (2.04) correctly. Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2020-03-10Merge tag 'mmc-2020-3-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- DM support for CAxxxx SoCs - eMMC board for presidio-asic - Add defer probe for mmc sdhci - TI SoCs mmc misc update
2020-03-10Merge tag 'u-boot-imx-20200310' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.04 ----------------- - DM : mx6sabresd - mx6ul_14x14_evk: fix video - mx8qxp; fix console for booting - sync DTS with kernel (imx6sx) - drop obsolete woodburn (mx35) Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/660550811
2020-03-10Merge tag 'u-boot-atmel-fixes-2020.04-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel fixes for 2020.04 cycle: - Includes two small configuration fixes that will solve the SPL booting on sama5d3_xplained board.
2020-03-10mx6slevk: Convert to DM_ETHPedro Jardim
This fixes the following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-10mx6sabreauto: Convert to DM_ETHPedro Jardim
This fixes the following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-10imx: imx8qm: enable relocation of fdt and initrdOliver Graute
Set CONFIG_SYS_BOOTMAPSZ to the amount of memory available which is needed to relocate the kernel, device tree and initrd. Remove 'fdt_high' and 'initrd_high' environment variables from default environment which prevents relocation of FDT and initrd. Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-10mx6sabresd: Convert ethernet to driver modelAlifer Moraes
Convert imx6sabresd ethernet to driver model to fix the following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-10board: sama5d3_xplained: Fix uboot size when loaded from NAND by SPLFabien Lehoussel
Uboot size is incorrect. Uboot SPL use CONFIG_SYS_MONITOR_LEN to read uboot from NAND : 0x80000 With sama5d3_xplained_nandflash_defconfig : u-boot.bin size is ~800Ko 0xC0000 So I increased size to 1MB : 0x100000 Signed-off-by: Fabien Lehoussel <fabien.lehoussel@medianesysteme.com>
2020-03-09imx: imx8qm_rom7720: added missing USDHC Base address definesOliver Graute
Added missing USDHC Base address defines Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09mx6cuboxi: don't disable fdt relocationBaruch Siach
fdt_high value of 0xffffffff disables fdt relocation on boot. We don't need that for Cubox-i/Hummingboard. Rely on generic code to find the optimal fdt location at boot time. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-03-09imx8qxp_mek: Fix the console command line stringFabio Estevam
Currently the expansion of the console variable leads to the following kernel command line: console=ttyLP0,${baudrate} earlycon root=/dev/mmcblk1p2 rootwait rw , which causes the console to not show characters after the LPUART driver is probed as the 'baudrate' variable is not properly translated. Fix it by splitting the console variable in two parts: one for the ttyLP0 part and the other one for the baudrate, which matches the way it is done on other i.MX targets. Tested by successfully booting a mainline kernel on a i.MX8QXP MEK board. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: remove woodburn boardStefano Babic
Board is not longer used, remove it. Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-03-09configs: am65x_evm: Add CONFIG_SUPPORT_EMMC_BOOTFaiz Abbas
With CONFIG_SUPPORT_EMMC_BOOT moved to Kconfig, move it to defconfig files. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-04Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Limit bootloader size to 1 MiB on R-Car Gen3
2020-03-04Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- ABB SECU board - Assorted minor fixes
2020-03-03ARM: socfpga: Add initial support for the ABB SECU boardHolger Brunck
Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-02Merge tag 'xilinx-for-v2020.04-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx fixes for v2020.04-rc4 - Fix link good bit handling in dp83867 - Rename generic Zynq defconfig - Fix zybo z7 low leve setup - Fix error path in zynq_gem driver and fix 64bit usage - Fix invalid clock name quieries for Versal - Fix zynq/zynqmp SPL low level configuration via DT selection
2020-03-01ARM: socfpga: Add missing Denali NAND config optionsMarek Vasut
The Denali SPL shim won't build without these options set, set them accordingly to fix the build error and let the SPL shim to work correctly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-01ARM: socfpga: Permit overriding the default timer frequencyMarek Vasut
The default timer rate may be different than 25 MHz, permit overriding the default rate in board configuration file. Ultimatelly, this should be properly handled by a clock driver, however that is not available on Gen5 yet. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-01ARM: rmobile: Limit bootloader size to 1 MiB on R-Car Gen3Marek Vasut
The HF/QSPI flash layout permits up to 1 MiB large bootloader blob, set CONFIG_BOARD_SIZE_LIMIT to enforce this limit and set the monitor size to match accordingly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-02-28ARM: zynq: Remove single comment about QSPIMichal Simek
Very likely configs have been moved to Kconfig by scripts and this just remains there that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28ARM: uniphier: add sdscript, sdboot, sdupdate environment variablesMasahiro Yamada
Add handy macros: - sdscript: source boot.scr in the file system of the SD media - sdboot : boot the kernel using the images in the file system of the SD media - sdscript: update the boot firmware in the SD media (in raw block sectors) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399Suniel Mahesh
roc-pc-rk3399 board has one user button & three user LED's. Currently we don't have any code support for these devices. Since button and LED's are specific to roc-pc-rk3399 board, split it into its own board file and add code support here. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rk3288: vyasa: Add console settingsJagan Teki
Add console settings like stdin, stdout and stderr as cros-ec-keyb and vidconsole respectively for Vyasa Rk3288 board. This would certainly help to detect the attached video devices (like HDMI) and print the console message on display. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-25 04:29:25 +0000