summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2018-06-29lib: div64: fix typeo in include/div64.hHeinrich Schuchardt
%s/reminder/remainder/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-06-27Merge git://git.denx.de/u-boot-imxTom Rini
2018-06-27mtd: nand: export nand_get_flash_type functionJörg Krause
`nand_get_flash_type()` allows identification of supported NAND flashs. The function is useful in SPL (like mxs_nand_spl.c) to lookup for a NAND flash (which does not support ONFi) instead of using nand_simple.c and hard-coding all required NAND parameters. Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
2018-06-27power: pmic: Let PFUZE3000 see all 256 registersTrent Piepho
The PFUZE3000 uses registers addresses up to 0xff. The DM pfuze100 driver supports both pfuze100 and pfuze3000. Allow it to use the device type to return the correct number of registers. Also rename the too generic PMIC_NUM_OF_REGS enumeration value for pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the pfuze100 enumeration value PFUZE100_NUM_OF_REGS. Cc: Peng Fan <Peng.Fan@freescale.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-27arm: dts: imx7: sync with LinuxStefan Agner
Sync with Linux commit 60cc43fc8884 ("Linux 4.17-rc1"). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-06-24efi.h: Do not use config optionsAlexander Graf
Currently efi.h determines a few bits of its environment according to config options. This falls apart with the efi stub support which may result in efi.h getting pulled into the stub as well as real U-Boot code. In that case, one may be 32bit while the other one is 64bit. This patch changes the conditionals to use compiler provided defines instead. That way we always adhere to the build environment we're in and the definitions adjust automatically. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: added some comments to describe the __x86_64__ check] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-24x86: efi-x86_payload: Enable usb keyboard during bootBin Meng
For boards that don't route serial port pins out, it's quite common to attach a USB keyboard as the input device, along with a monitor. However USB is not automatically started in the generic efi payload codes. This uses a payload specific last_stage_init() to start the USB bus, so that a USB keyboard can be used on the U-Boot shell. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-19config: meson-gx-common: Enable USB bootNeil Armstrong
Add USB as boot target depending on the configuration. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-06-19configs: db410c: Set eMMC env partition to BOOT2Ramon Fried
BOOT2 partition is empty and free for using to store the environment. Use that instead of the default user partition. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-19common: Fix cpu nr type which is always unsigned typeMichal Simek
cpu_cmd() is reading cpu number via simple_strtoul() which is always unsigned type. Platform code implementations are not expecting that nr can be negative and there is not checking in the code for that too. This patch is using u32 type for cpu number to make sure that platform code get proper value range. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-19ARM: image: Add option for ignoring ep bit 3Marek Vasut
Add option to the booti_setup() which indicates to it that the caller requires the image to be relocated to the beginning of the RAM and that the information whether the image can be located anywhere in RAM at 2 MiB aligned boundary or not is to be ignored. This is useful ie. in case the Image is wrapped in another envelope, ie. fitImage and not relocating it but moving it would corrupt the envelope. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Bin Chen <bin.chen@linaro.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-By: Bin Chen <bin.chen@linaro.org>
2018-06-18log: Fix incorect range check in log_get_cat_name()Simon Glass
This allows access to an element after the end of the array. Fix it. Reported-by: Coverity (CID: 173279) Signed-off-by: Simon Glass <sjg@chromium.org>
2018-06-18block: Add SPL_BLOCK_CACHE and default nAdam Ford
When enabling BLOCK_CACHE on devices with limited RAM during SPL, some devices may not boot. This creates an option to enable block caching in SPL by defaults off. It is dependent on SPL_BLK Fixes: 46960ad6d09b ("block: Have BLOCK_CACHE default to y in some cases") Signed-off-by: Adam Ford <aford173@gmail.com>
2018-06-18dm: gpio: Add DM compatibility to GPIO driver for DavinciAdam Ford
This adds DM_GPIO support for the davinici GPIO driver with DT support. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-06-18iotrace: fix behaviour when buffer is fullRamon Fried
Don't continue updating the offset when buffer is full. When the buffer size exhausts and there's no space left to write warn the user and update only the needed size and not both the offset and needed size. Add needed buffer size information in the iotrace command. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-18iotrace: move record definitons to header fileRamon Fried
The header definitions are needed for reading record information in cmd/iotrace.c Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-18configs: Remove empty #ifdef/#ifndef blocksChris Packham
Remove empty #ifdef/#ifndef..#endif blocks where the configuration they guarded has been completely removed. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-06-18am57xx_hs: avb2.0: add support of AVB 2.0Igor Opaniuk
1. Add vbmeta partition info to android partition layout for TI platforms. 2. Add support of AVB 2.0 (including avb subset of commands) for am57xx HS Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> [trini: Move to include/environment/ti/boot.h, reword commit slightly] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-18avb2.0: add boot states and dm-verity supportIgor Opaniuk
1. Add initial support of boot states mode (red, green, yellow) 2. Add functions for enforcing dm-verity configurations Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-18avb2.0: implement AVB opsIgor Opaniuk
Implement AVB ops on top of existing mmc subsystem API. Currently there is a full implementation of such operations, defined by [1] AVB2.0 specification: .read_from_partition() - reads N bytes from a partition identified by a name. .write_to_partition() - Writes N bytes to a partition identified by a name. .validate_vbmeta_public_key() - checks if the given public ‘vbmeta’ partition is trusted. .get_unique_guid_for_partition() - Gets the GUID for a partition identified by a string name. As [1] specification recommends to use tamper-evident storage for storing rollback indexes and device state (LOCKED/UNLOCKED), currently are only stubs instead of full implementation for these ops: .read_rollback_index() - Gets the rollback index for a given index location .write_rollback_index() - Sets the rollback index to a given location .read_is_device_unlocked() - Gets where the device is unlocked [1] https://android.googlesource.com/platform/external/avb/+/master/README.md Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-18Merge git://git.denx.de/u-boot-x86Tom Rini
2018-06-18mx6cuboxi: consolidate board detection and add som revision checkingJon Nettleton
In order to properly detect the board the checks need to be done in a specific order. Move these tests back into a single enum function that will always return the proper the board it is checking. This also adds the best test we have for detecting the rev 1.5 som, and it simplifies the device-tree filename building. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-18board: Silent out the console on the K+P's imx53 boardsLukasz Majewski
Disable console output by default on imx53 based boards from K+P. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18pico-imx7d: Adjust the dtb nameFabio Estevam
Since kernel commit 41bbeadceb03 ("ARM: dts: imx7d-pico-pi: Separate into cpu and baseboard dts") the dtb name has changed. Fix it accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-06-18wandboard: Remove hardcoded baudrate from "console" variableOtavio Salvador
We should use the baudrate variable available inside U-Boot environment to allow it to be changed dynamically. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-06-18display5: config: Add GPT verification and restoration code on SWUpdate entryLukasz Majewski
If GPT gets broken, then after N boot attempts we will run the SWUpdate restoration image. On its enter we will check GPT and restore it if needed. To test it: display5 > mmc write 0x12000000 4 8 It will overwrite the primary GPT table. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Reduce rootfs2 (BACKUP) size from 1528M to 512MLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Add cma=256M to command line argumentsLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Update swupdate initramfs file name (now supporting ext4)Lukasz Majewski
After moving to swupdate 2017.07, the default fs for swupdate rootfs is ext4, not ext3. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: factory: Update BACKUP rootfs in factory modeLukasz Majewski
After splitting rootfs images to BACKUP and ACTIVE, the "factory" u-boot also needs to update the former. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Provide 'tftp_mmc_rootfs_bkp' command to write BACKUP rootfsLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: wdt: Enable WDT support (both SPL and u-boot)Lukasz Majewski
Test case: The fitImage gets corrupted: truncate -c -s 3M fitImage run tftp_mmc_fitImg setenv boot_os y reset [board shall hang in SPL with "Trying to boot from MMC1" information] Then after X seconds WDT is causing board to reset. After N boot attempts we enter recovery mode. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: Support for the emergency PAD pressingLukasz Majewski
To enter the special mode, one needs to short cut two pads with e.g. screw driver. After power up the SPL will execute u-boot in which proper actions will be taken. It is worth noting that we do not alter envs (even the BOOT_FROM variable) and unconditionally go to recovery. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Update SPI-NOR partition for larger swupdate-initramfsLukasz Majewski
The SPI-NOR partition information has been updated to store swupdate-kernel-FIT just after envs as well as two times larger swupdate-initramfs image. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Remove support for Linux initramfs recovery image bootLukasz Majewski
This is a prerequisite patch to combine SWUpdate and Linux recovery initramfs images. It removes the support for it. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Reset the board when bootm failsLukasz Majewski
Since display5 is now supporting boot counting, we can just reset the board when bootm fails (i.e. it doesn't boot the fitImage kernel for any reason). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Provide command to flash the whole SPI-NOR memoryLukasz Majewski
It may be necessary to update the content of the whole SPI-NOR memory at once with using a single command (tftp_sf_img). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Add "factory" (1MiB) SPI-NOR partition in u-bootLukasz Majewski
To test if this partition is present - one needs to write: display5 > sf probe; mtdparts display5 > sf erase factory +0x100000 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: factory: Setup IP config data according to LEG production ↵Lukasz Majewski
setup Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: factory: Add support for BOOT_FROM = FACTORY switchLukasz Majewski
When BOOT_FROM = FACTORY, then the LEG's factory setup is performed. This code relies on boot_nfs u-boot command, so it shall be adjusted appropriately (e.g. provide proper fitImage file). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-17x86: Rename efi-x86 target to efi-x86_appBin Meng
To avoid confusion, let's rename the efi-x86 target to efi-x86_app. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-17efi: stub: Pass EFI GOP information to U-Boot payloadBin Meng
If UEFI BIOS has the graphics output protocol (GOP), let's pass its information to U-Boot payload so that U-Boot can utilize it (eg: an EFI framebuffer driver). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-17x86: Add generic EFI payload supportBin Meng
It is possible to create a generic EFI payload for all x86 boards. The payload is configured to include as many generic drivers as possible. All stuff that touches low-level initialization are not allowed as such is the EFI BIOS's responsibility. Platform specific drivers (like gpio, spi, etc) are not included. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-17Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-06-16ARM: rmobile: Fix environment placement on DraakMarek Vasut
The environment on Draak is in the eMMC, card 0, place it so. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-06-15Merge tag 'arc-updates-for-2018.07-rc2' of git://git.denx.de/u-boot-arcTom Rini
Here we just add a tool for HSDK flashable images preparation together with extensive documentation for HSDK board. This will help real-life users to update U-Boot on the board.
2018-06-15Merge tag 'xilinx-for-v2018.07-rc2' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx fixes for v2018.07-rc2 Zynq: - Fix missing watchdog header - DT fixes ZynqMP: - emmc configuration split - Enable SPD - Fix PMUFW_INIT_FILE logic - Coverity fixes in SoC code timer - Add timer_get_boot_us mmc: - Fix MMC HS200 tuning command serial: - Fix scrabled chars with OF_LIVE
2018-06-15ARC: HSDK: Add tool and make target to generate bspEugeniy Paltsev
HSDK board has preloader that reads SPI flash pages and searches for a special image header to fetch and load binary. Add tool, make target (bsp-generate) to generate update script and u-boot binary image with header for preloader. Also add script to default environment to apply updates. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-06-15arm64: zynqmp: Enable SPD ddr support for zcu102 targetsMichal Simek
zcu102 contains DIMM with SPD on it at 0x51 address. For example: i2c dev 13 i2c sdram 51 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-14ARM: rmobile: Point load address to more sane area on Gen3Marek Vasut
Point the $loadaddr variable and default load address to a more sane area, 384 MiB from the start of RAM. This is to avoid all the reserved memory at the beginning of RAM. The old behavior could still be easily retained by "setenv loadaddr 0x48080000" . The new setup allows us to use for example modern fitImage with kernel_noload, so use this as a new preferred default. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit (git 2.34.1) at 2025-01-15 22:40:56 +0000