summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2018-05-10bootcount: Add include guards into bootcount.h fileLukasz Majewski
This patch adds missing include guards for bootcount.h file. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-09Merge git://git.denx.de/u-boot-sunxiTom Rini
2018-05-08arm: ti: boot: Extract PARTS_DEFAULT to boot.hSam Protsenko
Eliminate code duplication: the same PARTS_DEFAULT was defined in am57xx_evm.h and in dra7xx_evm.h. Extract it to environment/boot.h and use in all OMAP5-based boards. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2018-05-08Merge git://git.denx.de/u-boot-mmcTom Rini
2018-05-08regmap: add regmap_update_bits() helperNeil Armstrong
Add the regmap_update_bits() to simply the read/modify/write of registers in a single command. The function is taken from Linux regmap implementation. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-08ARM: dts: stm32mp157c-ed1: Add regulator nodePatrice Chotard
Add regulator nodes needed by stpmu1 regulator driver Add vmmc-supply and vqmmc-supply regulator property for sdmmc1 and sdmmc2. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-08env: ti: android: boot with FIT ImagePraneeth Bajjuri
Boot android over emmc by default thru FIT image Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Suggested-by: Andrew F.Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2018-05-08ARM64: meson: Sync DT and Bindings with Linux 4.16Neil Armstrong
Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.16.0. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-05-08ARM: meson: rename GXBB to GXNeil Armstrong
Taking into account the Amlogic Family name starts with GX, including the GXBB, GXL and GXM SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-05-08clk: clk_stm32f: Use PLLSAIP as USB 48MHz clockPatrice Chotard
On all STM32F4 and F7 SoCs family (except STM32F429), PLLSAI output P can be used as 48MHz clock source for USB and SDMMC. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Tested By: Bruno Herrera <bruherrera@gmail.com>
2018-05-08mmc: add the MMC_CLK_ENABLE/DISABLE macro in mmc.hJaehoon Chung
mmc_set_clock() function has the disable argument as bool type. When mmc_set_clock is called, it might be passed to "true" or "false". But it's too confusion whether clock is enabled or disabled with only "true" and "false". To prevent the confusion, replace to MMC_CLK_ENABLE/DISABLE macro from true/false. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-05-08lib: fdtdec: drop the old compatible about max77686Jaehoon Chung
Drop the old compatible about max77686. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2018-05-07fastboot: sparse: make write_sparse_image useable for non-fastbootJassi Brar
write_sparse_image could be useful for non-fastboot users. For ex a platform, without usb-device/fastboot support, could get sparse images over tftp and write using the mmc command. Or non-android systems could also leverage the sparse format. Towards that, this patch removes anything fastboot specific from the write_sparse_image implementation. Which includes making the function return integer as error code and calls for fastboot logging via an optional callback function 'mssg'. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-05-07fastboot: sparse: remove redundant argument to write_sparse_imageJassi Brar
'sz' has no use for write_sparse_image, remove it simplifying the api. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-05-07syscon: add Linux-compatible syscon APIMasahiro Yamada
The syscon implementation in U-Boot is different from that in Linux. Thus, DT files imported from Linux do not work for U-Boot. In U-Boot driver model, each node is bound to a dedicated driver that is the most compatible to it. This design gets along with the concept of DT, and the syscon in Linux originally worked like that. However, Linux commit bdb0066df96e ("mfd: syscon: Decouple syscon interface from platform devices") changed the behavior because it is useful to let a device bind to another driver, but still work as a syscon provider. That change had happened before U-Boot initially supported the syscon driver by commit 6f98b7504f70 ("dm: Add support for generic system controllers (syscon)"). So, the U-Boot's syscon works differently from the beginning. I'd say this is mis-implementation given that DT is not oriented to a particular project, but Linux is the canon of DT in practice. The problem typically arises in the combination of "syscon" and "simple-mfd" compatibles. In Linux, they are orthogonal, i.e., the order between "syscon" and "simple-mfd" does not matter at all. Assume the following compatible. compatible = "foo,bar-syscon", "syscon", "simple-mfd"; In U-Boot, this device node is bound to the syscon driver (driver/core/syscon-uclass.c) since the "syscon" is found to be the most compatible. Then, syscon_get_regmap() succeeds. However, compatible = "foo,bar-syscon", "simple-mfd", "syscon"; does not work because this node is bound to the simple-bus driver (drivers/core/simple-bus.c) in favor of "simple-mfd" compatible. The compatible string "syscon" is just dismissed. Moreover, compatible = "foo,bar-syscon", "syscon"; works like the first case because the syscon driver populates the child devices. This is wrong because populating children is the job of "simple-mfd" (or "simple-bus"). This commit ports syscon_node_to_regmap() from Linux. This API does not require the given node to be bound to a driver in any way. Reported-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-07regmap: change regmap_init_mem() to take ofnode instead udeviceMasahiro Yamada
Currently, regmap_init_mem() takes a udevice. This requires the node has already been associated with a device. It prevents syscon/regmap from behaving like those in Linux. Change the first argumenet to take a device node. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-07dm: ofnode: add ofnode_device_is_compatible() helperMasahiro Yamada
device_is_compatible() takes udevice, but there is no such a helper that takes ofnode. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-07regmap: clean up regmap allocationMasahiro Yamada
Putting zero length array at the end of struct is a common technique to embed arbitrary length of members. There is no good reason to let regmap_alloc_count() branch by "if (count <= 1)". As far as I understood the code, regmap->base is an alias of regmap->ranges[0].start, but it is not helpful but make the code just ugly. Rename regmap_alloc_count() to regmap_alloc() because the _count suffix seems pointless. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: fixup cpu_info-rcar.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07arm: stm32mp1: add PSCI supportPatrick Delaunay
Add PSCI v1.0 support for Linux and manage PSCI state for each CPU (affinity 0 level) with all mandatory functions: - PSCI_VERSION - CPU_SUSPEND - CPU_OFF - CPU_ON - AFFINITY_INFO - SYSTEM_OFF - SYSTEM_RESET - PSCI_FEATURES and 1 optional to avoid Linux warning - MIGRATE_INFO_TYPE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: CITOOLS <smet-aci-reviews@lists.codex.cro.st.com>
2018-05-07SPDX: Convert all of our multiple license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have multiple licenses (in these cases, dual license) declared in the SPDX-License-Identifier tag. In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B" as per the Linux Kernel style document. Note that parenthesis are allowed so when they were used before we continue to use them. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07ARM: dts: sun8i: Sync r40 dtsi from LinuxJagan Teki
Sync sun8i-r40.dtsi changes from Linux with Merge: a406778618d0 088345fc3553 Author: Stephen Rothwell <sfr@canb.auug.org.au> Date: Tue Apr 24 14:15:02 2018 +1000 Merge branch 'akpm/master' Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-06board: ti: am43: Fix DCDC3 voltage for epos-evmKeerthy
A common voltage of 1.35V was being programmed for all am43 board versions. EPOS-EVM Needs 1.20V for LPDDR2. Fixes: fc69d472621b5 (“board: ti: AM43XX: Add ddr voltage rail configuration”) Reported-by: James Doublesin <doublesin@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-06stdio_names: Ensure MAX_NAMES is defined before use, don't use 3 directlyTom Rini
With tighter build flags the fact that <stdio_dev.h> doesn't have a reference back to MAX_NAMES causes an error. Include <stdio.h> here and then in common/console.c use MAX_NAMES rather than 3 when working with stdio_names. Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-06stdio_dev.h: Drop the video section as it is unusedTom Rini
With tighter build flags the fact that this header referenced uchar/ushort without including what typedefs it causes an error. Rather than add another include here, drop the section in question as it is unused. Reported-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-03Merge git://git.denx.de/u-boot-shTom Rini
2018-05-02ARM: rmobile: Zap #undef DEBUGMarek Vasut
The DEBUG macro is never defined unless explicitly enabled. Drop useless #undef DEBUG in the board configs so it won't spread any further. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-02ARM: rmobile: Convert CONFIG_ARCH_RMOBILE_BOARD_STRING to KconfigMarek Vasut
Convert the symbol to Kconfig, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-02ARM: rmobile: Fix CONFIG_RMOBILE_BOARD_STRINGMarek Vasut
Rename CONFIG_RMOBILE_BOARD_STRING to CONFIG_ARCH_RMOBILE_BOARD_STRING to make things consistent, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-02mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODEHannes Schmelzer
Some IP-core implementations of the SDHCI have different troubles on the silicon where they are placed. On ZYNQ platform for example Xilinx doesn't accept the hold timing of an eMMC chip which operates in High-Speed mode and must be forced to operate in non high-speed mode. To get rid of this "SDHCI_QUIRK_BROKEN_HISPD_MODE" is introduced. For more details about this refer to the Xilinx answer-recor #59999 https://www.xilinx.com/support/answers/59999.html This commit: - doesn't set HISPD bit on the host-conroller - reflects this fact within the host-controller capabilities Upon this the layer above (mmc-driver) can setup the card correctly. Otherwise the MMC card will be switched into high-speed mode and causes possible timing violation on the host-controller side. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2018-04-30Merge git://git.denx.de/u-boot-imxTom Rini
2018-04-28Cleanup CONFIG_SPL_SERIAL_SUPPORT migrationAlex Kiernan
CONFIG_SPL_SERIAL_SUPPORT had already been migrated to Kconfig, but existed in some include files; fix those up here. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-28arm: move SYS_ARCH_TIMER to KConfigAndre Przywara
SYS_ARCH_TIMER guards the usage of the ARM Generic Timer (aka arch timer) in U-Boot. At the moment it is mandatory for ARMv8 and used by a few ARMv7 boards. Add a proper Kconfig symbol to express this dependency properly, allowing certain board configuration to later disable arch timer in case there are any problems with it. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [tuomas: rebase + fix conflicts and resync with moveconfig & use select] Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2018-04-28ARM: qemu-arm: Dynamically determine timer frequencyTuomas Tynkkynen
After commit 46fc679ede5f69 ("arm: timer: get frequency for arch timer armv7 in cp15 cntfrq") the ARM architected timer driver knows how to determine the timer frequency at runtime by reading the CNTFRQ register, so we don't need to hardcode the timer frequency anymore. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2018-04-28Migrate IMAGE_FORMAT_LEGACY to KconfigAlex Kiernan
This converts IMAGE_FORMAT_LEGACY to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-04-28serial: Migrate CONFIG_FSL_LINFLEXUART to KconfigTuomas Tynkkynen
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-04-28ARM: s32v234evb: Set CONFIG_DM & CONFIG_DM_SERIAL in KconfigTuomas Tynkkynen
These symbols are declared in Kconfig, so it's wrong to set them in header files. Note that this is not size-neutral - some 'default y' options will now get turned on by Kconfig, such as CONFIG_CMD_DM=y and CONFIG_DM_STDIO=y. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-04-27configs: Drop CONFIG_NET_MULTITom Rini
We have not had CONFIG_NET_MULTI be meaningful for quite some time, drop the last remnants. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Convert CONFIG_SPI to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27ARM: mxs: support full SPL frameworkMans Rullgard
This allows using the full SPL framework on mxs devices. In this mode, the u-boot.sb image loaded by the boot ROM contains only the SPL which then loads U-Boot proper or a kernel in falcon mode. Signed-off-by: Mans Rullgard <mans@mansr.com>
2018-04-26Merge git://git.denx.de/u-boot-shTom Rini
2018-04-26ARM: rmobile: Update E2 AltMarek Vasut
The E2 Alt port was broken since some time. This patch updates the E2 Alt port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26ARM: rmobile: Update M2-N GoseMarek Vasut
The M2-N Gose port was broken since some time. This patch updates the M2-N Gose port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26ARM: rmobile: Update H2 LagerMarek Vasut
The H2 Lager port was broken since some time. This patch updates the H2 Lager port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26imx6ul: opos6ul: add SPL_DM supportSébastien Szymanski
Since commit commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL support") the OPOS6UL board doesn't boot anymore. Adding SPL_DM support makes the board boot again. Fixes: commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL support") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2018-04-26warp7: Add support for automated secure boot.scr verificationBryan O'Donoghue
This patch adds support for verifying a signed boot.scr. With this in place it's possible for run-time Linux to update boot.scr to set different variables such as switching between different boot partitions, pointing to different kernels etc and for u-boot to verify these changes via the HAB prior to executing the commands contained in boot.scr. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-26warp7: hab: Set environment variable indicating IVT offsetBryan O'Donoghue
This patch introduces the environment variable ivt_offset. When we define a load address for Linux or DTB or any file the IVT associated with that file is prepended. We extract the actual load addresses from u-boot.cfg and feed these values into the code-signing process - hence we want u-boot to have the real load addresses exported in uboot.cfg. ivt_offset represents the addition or subtraction from the load address that must happen to find an IVT header. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-26warp7: add warp7_auth_or_failBryan O'Donoghue
Doing secure boot on the WaRP7 using a common image format and the same variable to represent the base address for each call means we can reduce down the command to a single environment command. This patch adds warp7_auth_or_fail as a wrapper around "hab_auth_img_or_fail ${hab_ivt_addr} ${filesize} 0". Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-26warp7: Define the name of a signed boot-script fileBryan O'Donoghue
We need to know the name of a signed boot-script, its better to have a separate variable for this then to simply append some fixed string to an existing image name. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-26warp7: select uuid partition based on rootpartBryan O'Donoghue
Assigning the UUID discovery path to a tweakable environment variable means that later steps in the boot process - particularly a boot script can change the target root partition of a particular Linux boot. Retargeting the rootfs is an important feature when doing ping/pong upgrades allowing a boot script to select ping or pong as necessary without reprogramming the bootloader. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>