summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2018-12-26Revert "arm: config: fix default console only to specify the device"Seung-Woo Kim
This reverts commit 232ed3ca534708527a9515c7c41bc3542949525c. In exynos boards, ${console} is used to set bootargs but it sets without "console=", so CONFIG_DEFAULT_CONSOLE for these boards is designated with "console=" but it is removed. So revert the commit. References for using ${console} in board/samsung/common/bootscripts/autoboot.cmd board/samsung/common/bootscripts/bootzimg.cmd Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-12-21exynos5-dt-types: add missing dtb file for Odroid HC1/HC2Anand Moon
Add missing exynos5422-odroidhc1.dtb needed to set for dfu env. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-12-17arm: ti: boot: Increase system partition sizeSam Protsenko
Android code base is growing, so since Android "Pie" the size of system.img grew up to be about 740 MiB. Let's increase system.img to 1 GiB to accommodate for those changes and leave some margin for future changes. We don't want to make it more than 1 GiB, because we should keep userdata partition big enough (for user files, like media etc.), and eMMC size on BeagleBoard-X15 is only 3.5 GiB. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Praneeth Bajjuri <praneeth@ti.com>
2018-12-17Restore compatibility of image type IDsStefano Babic
Commit a2b96ece5be146f4995d737f047e5bbb76079b8f breaks the enumeration of the Image Types. New image types can be appended, but they cannot be inserted in the list else backward compatibility is broken. This restores the images types as before 2018.11 and move i.MX8 related images at the end. Signed-off-by: Robert Berger <robert.berger@ReliableEmbeddedSystems.com> Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tom Rini <trini@konsulko.com>
2018-12-16Merge tag 'for-master-20181216' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements and fixes or u-boot-rockchip: - new board: adds rv1108-elgin-r1 board support - rk3288-evb: dts: remove 'vmmc' from emmc node - rk3399-puma: dts: remove obsolete DTS node 'vcc5v0_host'
2018-12-16ARM: rockchip: Add rv1108-elgin-r1 board supportOtavio Salvador
Add the initial support for Elgin R1 board, which is based on the RV1108 SoC and has the following features currently supported in U-Boot: - UART - eMMC - USB Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-15Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Second half of the USB Gadget DM conversion
2018-12-15tee: change return code for REE FS supplicant cmdIgor Opaniuk
If OP-TEE core is compiled with support of REE FS and RPMB at the same time (CFG_RPMB_FS ?= y; CFG_RPMB_FS ?= y), and persistent storage API is used with TEE_STORAGE_PRIVATE storage id, it will lead to TA panic. E/TC:? 0 TA panicked with code 0xffff0009 ..... E/TC:? 0 Call stack: E/TC:? 0 0x000000004002f2f8 TEE_OpenPersistentObject at lib/libutee/tee_api_objects.c:422 In this particular case TEE_ERROR_STORAGE_NOT_AVAILABLE is more suitable than TEE_ERROR_NOT_IMPLEMENTED, as it provides to a TA a possibility to handle this error code [1]. >From GPD TEE Internal Core specification [2]: TEE_ERROR_STORAGE_NOT_AVAILABLE - if the persistent object is stored in a storage area which is currently inaccessible. It may be associated with the device but unplugged, busy, or inaccessible for some other reason. [1]: https://github.com/OP-TEE/optee_os/blob/94db01ef448d1e552161c2d861d57a5f8bda0cc0/lib/libutee/tee_api_objects.c#L419 [2]: https://globalplatform.org/wp-content/uploads/2018/06/GPD_TEE_Internal_Core_API_Specification_v1.1.2.50_PublicReview.pdf Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-12-14configs: am335x_evm: Do not disable DM_USB in SPLJean-Jacques Hiblot
DM_USB is now supported in the SPL. Do not undef it Besides to support DM_USB in SPL, one now has to use SPL_DM_USB Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14configs: k2g_evm: Enable DFU on K2G EVMJean-Jacques Hiblot
The K2G evm uses the generic DWC3 driver. DFU can thus be enabled. Enabling DFU for easier firmware update. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14usb: host: replace xhci-keystone driver by the generic dwc3 driverJean-Jacques Hiblot
The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14usb: composite: Move bitmap related operations to ./include/linux/bitmap.hLukasz Majewski
The BITMAP related operations can now be moved to ./include/linux/bitmap.h file to mimic the Linux kernel directory tree. This change also allows to remove the lin_gadget_compat.h header file (which is a legacy code only for composite U-boot layer). It was also possible to remove #includes from several USB gadget drivers. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2018-12-13dm: sound: Use the correct number of channels for soundSimon Glass
At present the 'beep' sound generates a waveform for only one channel even if two are being used. This means that the beep is twice the frequency it should be. Correct this by making it a parameter. The fix in a previous commit was correct for sandbox but not for other boards. Fixes: 03f11e87a8 ("sound: Correct data output in sound_create_square_wave()") Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13dm: sound: Complete migration to driver modelSimon Glass
All users of sound are converted to use driver model. Drop the old code and the CONFIG_DM_SOUND option. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13dm: core: Add a function to read into a unsigned intSimon Glass
The current dev_read...() functions use s32 and u32 which are convenient for device tree but not so useful for normal code, which often wants to use normal integers for values. Add a helper which supports returning an unsigned int. Also add signed versions of the unsigned readers. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13dm: sound: Create a uclass for soundSimon Glass
The sound driver pulls together the audio codec and i2s drivers in order to actually make sounds. It supports setup() and play() methods. The sound_find_codec_i2s() function allows locating the linked codec and i2s devices. They can be referred to from uclass-private data. Add a uclass and a test for sound. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13dm: sound: Create a uclass for i2sSimon Glass
The i2s bus is commonly used with audio codecs. It provides a way to stream digital data sychronously in both directions. U-Boot only supports audio output, so this uclass is very simple, with a single tx_data() method. Add a uclass and a test for i2s. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13dm: sound: Create a uclass for audio codecsSimon Glass
An audio codec provides a way to convert digital data to sound and vice versa. Add a simple uclass which just supports setting the parameters for the codec. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13dm: sound: Rename samsung_i2s_priv to i2s_uc_privSimon Glass
This structure contains information that is likely needed by any i2s driver so it seems useful to attach it to the (forthcoming) i2c uclass. For now, just rename it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13dm: sound: Drop codec_typeSimon Glass
This field is not really used. It is always set to a known value. Drop it to simplify the code. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13dm: sound: samsung: Rename i2stx_info to samsung_i2s_privSimon Glass
This struct is only used by the Samsung I2C driver and should move into that driver. For now, rename it so it is clear that is driver-private info. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13dm: sound: Rename en_sound_codec to sound_codecSimon Glass
The en_ prefix is confusing and not needed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-12am3517_evm: Use ttyS2 instead of ttyO2Adam Ford
The serial driver in the kernel moved from ttyOx to ttySx a while ago. This patch updates the console parameter to align with the kernel change. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-12-12qemu-arm: Add persistent environment supportSumit Garg
Currently on qemu-arm platforms environment is kept in RAM. Instead use pflash device 1 to provide persistent environment support across device reset. Also (optionally) provide support for persistent environment across qemu machine OFF/ON using following instructions: - Create envstore.img using qemu-img: qemu-img create -f raw envstore.img 64M - Add a pflash drive parameter to the command line: -drive if=pflash,format=raw,index=1,file=envstore.img Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2018-12-12qemu-arm: Enable VirtIO distro targetSumit Garg
With -device virtio-blk-device,drive=hd0, it could detect distro boot target. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Alexander Graf <agraf@suse.de>
2018-12-10Merge tag 'fsl-qoriq-for-v2019.01-rc2' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Add TFA boot flow for some Layerscape platforms Add support for lx2160a SoC [trini: Add a bunch of missing MAINTAINERS entries] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-10Merge tag 'for-master-20181210' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements: - init DRAM for RK322x in SPL - add FAN53555 PMIC/regulator driver - update MicroCrystal RV3029 driver to Kconfig and sync from Linux - add bootcount uclass and first DM-driver for bootcount
2018-12-10Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini
- DM_I2C_COMPAT removal for all ti platforms from Jean-Jacques Hiblot - Fix in i2c command help output from Chirstoph Muellner.
2018-12-10Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DWC3 and UDC cleanup
2018-12-10bootcount: add uclass for bootcountPhilipp Tomsich
The original bootcount methods do not provide an interface to DM and rely on a static configuration for I2C devices (e.g. bus, chip-addr, etc. are configured through defines statically). On a modern system that exposes multiple devices in a DTS-configurable way, this is less than optimal and a interface to DM-based devices will be desirable. This adds a simple driver that is DM-aware and configurable via DTS. If ambiguous (i.e. multiple bootcount-devices are present) the /chosen/u-boot,bootcount-device property can be used to select one bootcount device. Initially, this provides support for the following DM devices: * RTC devices Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2018-12-10lib: fdtdec: Add function re-setup the fdt more effecientlyJean-Jacques Hiblot
In some cases it may be useful to be able to change the fdt we have been using and use another one instead. For example, the TI platforms uses an EEPROM to store board information and, based on the type of board, different dtbs are used by the SPL. When DM_I2C is used, a first dtb must be used before the I2C is initialized and only then the final dtb can be selected. To speed up the process and reduce memory usage, introduce a new function fdtdec_setup_best_match() that re-use the DTBs loaded in memory by fdtdec_setup() to select the best match. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPLJean-Jacques Hiblot
DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C API when DM_I2C is used. The goal is to eventually remove DM_I2C_COMPAT when all I2C "clients" have been migrated to use the DM API. This a step in that direction for the TI based platforms. Build tested with buildman: buildman -dle am33xx ti omap3 omap4 omap5 davinci keystone boot tested with: am335x_evm, am335x_boneblack, am335x_boneblack_vboot (DM version), am57xx_evm, dra7xx_evm, k2g_evm, am437x_evm Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10configs: am335x_pdu001: remove CONFIG_DM_I2C_COMPATJean-Jacques Hiblot
Remove the last call to the non-DM I2C API. Also remove the #undef CONFIG_DM_I2C_COMPAT because it is not defined in the common header file anymore. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Felix Brack <fb@ltec.ch> Tested-by: Felix Brack <fb@ltec.ch> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10power: make most tps drivers and the twl4030 driver compatible with DM_I2CJean-Jacques Hiblot
Those driver are not DM drivers per se (not using the PMIC/regulator framework) and are using the legacy I2C API. Make them compatible with the DM_I2C API. This impacts the following drivers: - palmas (used by am57xx/dra7xx evms) - tps65218 (used by am43xx evms) - tps65217 and tps65910 (used by am335x evms and am335x boneblack vboot) - twl4030 (used by omap3_logicpd) - tps65217 (used by brppt1) - twl6030 Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROLJean-Jacques Hiblot
If OF_CONTROL is not enabled and DM_SEQ_ALIAS is enabled, we must assign an alias (requested sequence number) to devices that belongs to a class with the DM_UC_FLAG_SEQ_ALIAS flag. Otherwise uclass_find_device_by_seq() cannot be used to get/probe a device. In particular i2c_get_chip_for_busnum() cannot be used. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-09Merge git://git.denx.de/u-boot-marvellTom Rini
- Sync DDR training with Marvell code for Armada 38x by Chris - Misc updates to Armada 38x Helios4 board by Aditya
2018-12-08Roll CRC16-CCITT into the hash infrastructurePhilipp Tomsich
The CRC16-CCITT checksum function is useful for space-constrained applications (such as obtaining a checksum across a 2KBit or 4KBit EEPROM) in boot applications. It has not been accessible from boot scripts until now (due to not having a dedicated command and not being supported by the hash infrstructure) limiting its applicability outside of custom commands. This adds the CRC16-CCITT (poly 0x1021, init 0x0) algorithm to the list of available hashes and adds a new crc16_ccitt_wd_buf() to make this possible. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [trini: Fix building crc16.o for SPL/TPL] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-08lib: merge CRC16-CCITT into u-boot/crc.hPhilipp Tomsich
This merges the CRC16-CCITT headers into u-boot/crc.h to prepare for rolling CRC16 into the hash infrastructure. Given that CRC8, CRC32 and CRC32-C already have their prototypes in a single header file, it seems a good idea to also include CRC16-CCITT in the same. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-08arm: mvebu: helios4: Enable SPI flash supportAditya Prayoga
Enable SPI flash support under U-Boot and SPL. The ENV size and offset, ported from U-Boot 2013.01 Marvell version: 2015_T1.0p16 To create U-Boot image for SPI flash, user would need to replace * CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC with CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI * CONFIG_ENV_IS_IN_MMC with CONFIG_ENV_IS_IN_SPI_FLASH Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-08arm: mvebu: helios4: Reduce U-Boot image sizeAditya Prayoga
Remove unused I2C support in SPL and use simple_malloc functions to reduce SPL image size. Since Helios4 does not have any PCIe allocated on SerDes, remove PCI support. MTD layer on top of SPI flash is not needed, remove it also. Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-08arm: mvebu: helios4: mmc: move environment before 1MAditya Prayoga
Store the environment before 1M into the block device. This constant is easier to remember, saves a little space, and is in line with what SolidRun's 2018.01-based fork does for the clearfog. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com> [ Aditya Prayoga: * Port forward] Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-07Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- Various axp209 fixes - Fixes for OLinuXino-A20-Lime2 / OLinuXino-A20-Lime2-eMMC
2018-12-07power: axp209: Add support for voltage rate control on LDO3Olliver Schinagl
The AXP209 LDO3 regulator supports voltage rate control, or can set a slew rate. This allows for the power to gradually rise up to the desired voltage, instead of spiking up as fast as possible. Reason to have this can be to reduce the inrush currents for example. There are 3 slopes to choose from, the default, 'none' is a voltage rise of 0.0167 V/uS, a 1.6 mV/uS and a 0.8 mV/uS voltage rise. In ideal world (where vendors follow the recommended design guidelines) this setting should not be enabled by default. Unless of course AXP209 crashes instead of reporting overcurrent condition as it normally should do in this case. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-07power: axp209: Reduce magic values by adding defines for LDO[234]Olliver Schinagl
The AXP209 has a few 'magisc-ish' values that are better served with clear defines. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-07power: axp209: Define the chip version maskOlliver Schinagl
Use a define for the chip version mask on the axp209. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-07power: axp209: Use BIT() macroOlliver Schinagl
Use the standard BIT() macro for bitfield definitions in headers. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-07syscon: dm: Add a new method to get a regmap from DTSJean-Jacques Hiblot
syscon_regmap_lookup_by_phandle() can be used to get the regmap of a syscon device from a reference in the DTS. It operates similarly to the linux version of the namesake function. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-07dm: usb: create a new UCLASS ID for USB gadget devicesJean-Jacques Hiblot
UCLASS_USB_DEV_GENERIC was meant for USB devices connected to host controllers, not gadget devices. Adding a new UCLASS for gadget devices alone. Also move the generic DM code for USB gadgets in a separate file for clarity. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dwc3: move phy operation to core.cJean-Jacques Hiblot
Those operations can be used for peripheral operation as well as host operation. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> # Conflicts: # drivers/usb/dwc3/core.c # drivers/usb/host/xhci-dwc3.c
2018-12-07usb: udc: implement DM versions of ↵Jean-Jacques Hiblot
usb_gadget_initialize()/_release()/_handle_interrupt() When DM_USB_GADGET the platform code for the USB device must be replaced by calls to a USB device driver. usb_gadget_initialize() probes the USB device driver. usb_gadget_release() removes the USB device driver. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
generated by cgit (git 2.34.1) at 2025-01-04 07:19:47 +0000