summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-08-10Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- R8A77980 V3H support
2019-08-09Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Enable SD slot on Intel Edison - Populate CSRT ACPI table for shared DMA controller on Intel Tangier - Convert Intel ICH-SPI driver to use new spi-mem ops - Enable config_distro_bootcmd for QEMU x86 - Support U-Boot as a payload for Intel Slim Bootloader - Avoid writing temporary asl files into the source tree which fixes the parallel build issue occasionally seen
2019-08-09ARM: renesas: Add R8A77980 V3H Condor board codeMarek Vasut
Add board code for the R8A77980 V3H Condor board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09ARM: dts: renesas: Add R8A77980 V3H DTs and headersMarek Vasut
Import R8A77980 V3H DTs and headers from Linux 5.2.7 , commit 5697a9d3d55f. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09apalis-tk1: configs: remove legacy usbboot commandIgor Opaniuk
Remove obsolete legacy usbboot wrapper, as distroboot can handle booting from USB drivers. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: support v1.2 hardware revisionMarcel Ziswiler
Support the V1.2 hardware revision with the following pin muxing changes: Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4 are now used as DDC pins. Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are now used as USB power enable signals. Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power enable signals are now used as GPIO3 and GPIO4. Additionally a new device tree file tegra124-apalis-v1.2-eval.dtb is loaded on V1.2 and later modules and resp. USB power enable signals activated. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: remove default vesa vga mode from vidargsMarcel Ziswiler
Remove video=tegrafb0:640x480-16@60 aka VESA VGA mode from vidargs in order for the panel specification in the device tree to be used. This causes the default to be the 10.1" LVDS display which will be available in the Toradex webshop shortly. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: switch to zImageIgor Opaniuk
Switch to the generic compressed Kernel image type (zImage) instead of the U-Boot specific uImage format. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: add pcie_aspm=off to defargsIgor Opaniuk
Disabling ASPM fixes incompatibilities with some PCIe cards Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: enable user debug by defaultIgor Opaniuk
Let the kernel print some debug messages when a user program crashes due to an exception. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09board: intel: Add new slimbootloader boardPark, Aiden
Add slimbootloader board to run U-boot as a Slim Bootloader payload - Add new board/intel/slimbootloader directory with minimum codes - Add slimbootloader configuration files - Add doc/board/intel/slimbootloader.rst Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: add slimbootloader board MAINTAINERS file] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: qemu: Fix non-working ramboot and nfsboot environment variablesBin Meng
With qemu-x86 starting to use config_distro_bootcmd, the pre-defined ramboot and nfsboot commands do not work any more. This is caused by undefined environment variable 'ramdiskaddr' that was previously set in CONFIG_EXTRA_ENV_SETTINGS but later CONFIG_EXTRA_ENV_SETTINGS was redefined for distro boot. Update the x86 generic CONFIG_EXTRA_ENV_SETTINGS to consider distro boot, and remove the one in qemu-x86.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09qemu-x86: Use config_distro_bootcmdJoshua Watt
Converts qemu x86 machines to boot using distro_config. The intent is to allow u-boot in qemu to be maximally compatible with many boot methods without having to change the config. Previously, u-boot would only boot in a very limited set of circumstances where there was a /boot/vmlinuz on scsi 0:3 with no ramdisk. Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: convert doc updates to reST] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-07Update include/android_image.h from AOSPAlex Deymo
This takes the latest changes from AOSP from the file include/bootimg/bootimg.h from the repository: https://android.googlesource.com/platform/system/tools/mkbootimg and update the U-Boot version with the latest changes. This file keeps the changes from AOSP to a minimum: * Comments were converted from C++ to C style. * Code inside __cplusplus #ifdef blocks were removed. * C++11 struct extensions replaced with a single struct. Signed-off-by: Alex Deymo <deymo@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-08-07ARM: dts: add hifsys reset for MediaTek SoCsRyder Lee
This adds missing hifsys reset parts in header files. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
2019-08-07log: document the assign() macroHeinrich Schuchardt
Provide a concise description of the assert() macro. Point out that the tested expression is always executed, irrespective of the value of _DEBUG. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-04Merge tag 'efi-2019-10-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc2 With this pull request a workaround for GRUB on 32bit ARM is re-enabled and made customizable. Without the patch booting on ARM 32bit with GRUB prior to version 2.04 or with a cache which is not managed via CP15 fails. Further work will be needed to achieve a UEFI compliant cache handling. According to the UEFI spec all caches except those that cannot be managed via CP15 should be enabled. An implementation of the ConvertPointer() runtime service is provided. efi_crt0 is always rebuild to avoid having to call 'make mrproper' when switching architectures.
2019-08-02Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clkTom Rini
- Port more CCF code to work with i.MX8 devices.
2019-08-02autoboot: Add comments for menu_show()Simon Glass
Add comments for this function. Also remove the #ifdef around it so that it can be called from 'if (IS_ENABLED(...))'. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02Convert CONFIG_AUTOBOOT_MENU_SHOW to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_AUTOBOOT_MENU_SHOW Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02autoboot: Rename CONFIG_MENU_SHOW to include AUTOBOOTSimon Glass
Rename this option to CONFIG_AUTOBOOT_MENU_SHOW this it relates to the autoboot functionality. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02autoboot: Rename CONFIG_MENUKEY to CONFIG_AUTOBOOT_MENUKEYSimon Glass
Since this is part of the autoboot functionality, it makes sense to name it with an AUTOBOOT prefix. No mainline boards use it so this should be safe, and downstream boards will need to adjust. Since this option is just an integer value, it really needs another option to control whether the feature is enabled or not. Add a new CONFIG_USE_AUTOBOOT_MENUKEY for that. This fits better with how things are done with Kconfig, avoiding the need to use a specific value to disable the feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02Add CONFIG_USE_PREBOOT to boards that use CONFIG_PREBOOTSimon Glass
In order to use CONFIG_PREBOOT with Kconfig, CONFIG_USE_PREBOOT must be defined for each board. To prepare for conversion to Kconfig, add this. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-02Convert CONFIG_SHOW_BOOT_PROGRESS to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SHOW_BOOT_PROGRESS Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-31Merge tag 'u-boot-amlogic-20190731' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync Amlogic G12A DT with linux 5.3-rc1 - add support for 4GiB DRAM memory - add support for Amlogic G12B based Odroid-N2 - small duplicate logic fix for gxbb clock driver
2019-07-31env: ti: boot: Handle reboot reason from BCBSam Protsenko
In case of Android boot, reboot reason can be written into BCB (usually it's an area in 'misc' partition). U-Boot then can obtain that reboot reason from BCB and handle it accordingly to achieve correct Android boot flow, like it was suggested in [1]: - if it's empty: perform normal Android boot from eMMC - if it contains "bootonce-bootloader": get into fastboot mode - if it contains "boot-recovery": perform recovery boot The latter is not implemented yet, as it depends on some features that are not implemented on TI platforms yet (in AOSP and in U-Boot). [1] https://marc.info/?l=u-boot&m=152508418909737&w=2 Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-31ARM: dts: add support for Odroid-N2Neil Armstrong
Import HardKernel Odroid-N2 DT from Linux 5.3-rc1, commit 5f9e832c1370 ("Linus 5.3-rc1") based on an Amlogic G12B S922X SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1Neil Armstrong
Sync the Amlogic Meson G12A DT and Bindings file with the Linux 5.3-rc1 from the commit 5f9e832c1370 ("Linus 5.3-rc1"). Also remove the meson-g12a-u-boot.dtsi and meson-g12a-u200-u-boot.dtsi, now conflicting with the main DT content. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31clk: sandbox: add composite clkPeng Fan
Add composite clk to sandbox driver Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: gate: support sandboxPeng Fan
Introduce io_gate_val for sandbox clk gate test usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: add composite clk supportPeng Fan
Import clk composite clk support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk-provider: include clk-uclass.hPeng Fan
Because clk-provider use clk_ops, so let's include clk-uclass.h Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: fixed_rate: export clk_fixed_ratePeng Fan
Export the structure for others to use. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: add clk-gate supportPeng Fan
Import clk-gate support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: export mux/divider opsPeng Fan
Export mux/divider ops and divider_recalc_rate for composite usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: mux: add set parent supportPeng Fan
Add set parent support for clk mux Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31clk: introduce clk_dev_bindedPeng Fan
When support Clock Common Framework, U-Boot use dev for clk tree information, there is no clk->parent. When support composite clk, it contains mux/gate/divider, but the mux/gate/divider is not binded with device. So we could not use dev_get_uclass_priv to get the correct clk_mux/gate/divider. So add clk_dev_binded to let choose the correct method. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-30Merge tag 'video-for-2019.10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix EDID mode filtering - extend mxc_ipuv3_fb to enable backlight/display - include fb_base in global_data for DM_VIDEO - show frame buffer address via board info as used to be with legacy VIDEO support
2019-07-30Merge tag 'xilinx-for-v2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2019.10 fpga: - Xilinx virtex2 cleanup - Altera cyclon2 cleanup zynq: - Minor Kconfig cleanup - Add psu_init configuration for Z-turn board zynqmp: - Add support for pmufw config passing to PMU - script for psu_init conversion - zcu1275 renaming xilinx: - Add support for UltraZed-EV SoM
2019-07-30Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2019-07-30efi_loader: definition of efi_virtual_address_map()Heinrich Schuchardt
Use efi_uintn_t where the UEFI spec uses UINTN. Use efi_uintn_t also for the result of the division of two efi_uintn_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30global_data: enable fb_base for DM_VIDEOHeiko Schocher
with CONFIG_VIDEO we store fb base address in global data fb_base variable. Do this also in DM_VIDEO case. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30cmd: fpga: Change return value to avoid printing usage textAlexander Dahl
In cmd/fpga.c the commands should return enum command_ret_t, e.g. CMD_RET_USAGE, CMD_RET_SUCCESS, or CMD_RET_FAILURE. What they actually do is passing a return value from different 'fpga_' functions. Passing on a return value of -1 from a called function leads to printing out usage text. In case of actually correct usage with correctly specified parameters but some fail at runtime printing out that usage text is distracting. The reason is most 'fpga_' functions return either FPGA_SUCCESS or FPGA_FAIL, the latter was equal to -1 which is the same value as CMD_RET_USAGE. So just passing on FPGA_FAIL lead to printing out usage. We should only return CMD_RET_USAGE in cases, where the user sent wrong input. Every other case should return CMD_RET_SUCCESS or CMD_RET_FAILURE, and not simply pass an error code. Simply changing FPGA_FAIL from -1 to 1 gets the job done. Suggested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: Add some more device sizesAlexander Dahl
There seems to be only one place, where this is checked against: `altera_validate()`. It should be non zero. Otherwise it is only used to display it, so it probably does not really matter at the moment. But we had the datasheet open anyway … Sizes in datasheet are bit counts, display here is in bytes. Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: virtex2: Add slave serial programming supportRobert Hancock
This adds support for slave serial programming, in addition to the previously supported slave SelectMAP mode. There are two ways that this can be used: -Using the clk and wdata callbacks in order to write image data one bit at a time using pure bit-banging. This works, but is rather painfully slow with typical image sizes. -By specifying the wbulkdata callback instead, the image loading process can be offloaded to SPI hardware. In this mode the clk and wdata callbacks do not need to be specified. This allows the image to be loaded much faster, taking only a few seconds with even relatively large images. Slave serial programming has been tested on the Kintex-7 series of FPGAs. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30ARM: zynq: delete long-dead CONFIG_USB_CABLE_CHECKRobert P. J. Day
This Kbuild option disappeared way back in 2014: commit 75504e9592745021006cb8905b5ff5a51d9d1cb3 Author: Mateusz Zalega <m.zalega@samsung.com> Date: Wed Apr 30 13:07:48 2014 +0200 ... snip ... CONFIG_USB_CABLE_CHECK was removed. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-29Merge branch '2019-07-29-ti-imports'Tom Rini
- More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
2019-07-29configs: omapl138_lcdk: enable NAND self-init in SPLBartosz Golaszewski
Now that we have enabled the driver-model in SPL, we can remove the code disabling NAND self-init in SPL from the config include for omapl138-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29davinci: da850-evm: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-evm. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
generated by cgit (git 2.34.1) at 2025-01-10 13:56:43 +0000