1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017-2020 Synopsys, Inc. All rights reserved.
* Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
*/
/dts-v1/;
#include "skeleton.dtsi"
#include "dt-bindings/clock/snps,hsdk-cgu.h"
#include "dt-bindings/reset/snps,hsdk-reset.h"
/ {
#address-cells = <1>;
#size-cells = <1>;
aliases {
console = &uart0;
spi0 = &spi0;
};
cpu_card {
core_clk: core_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <500000000>;
u-boot,dm-pre-reloc;
};
};
clk-fmeas {
clocks = <&cgu_clk CLK_ARC_PLL>, <&cgu_clk CLK_SYS_PLL>,
<&cgu_clk CLK_TUN_PLL>, <&cgu_clk CLK_DDR_PLL>,
<&cgu_clk CLK_ARC>, <&cgu_clk CLK_HDMI_PLL>,
<&cgu_clk CLK_TUN_TUN>, <&cgu_clk CLK_HDMI>,
<&cgu_clk CLK_SYS_APB>, <&cgu_clk CLK_SYS_AXI>,
<&cgu_clk CLK_SYS_ETH>, <&cgu_clk CLK_SYS_USB>,
<&cgu_clk CLK_SYS_SDIO>, <&cgu_clk CLK_SYS_HDMI>,
<&cgu_clk CLK_SYS_GFX_CORE>, <&cgu_clk CLK_SYS_GFX_DMA>,
<&cgu_clk CLK_SYS_GFX_CFG>, <&cgu_clk CLK_SYS_DMAC_CORE>,
<&cgu_clk CLK_SYS_DMAC_CFG>, <&cgu_clk CLK_SYS_SDIO_REF>,
<&cgu_clk CLK_SYS_SPI_REF>, <&cgu_clk CLK_SYS_I2C_REF>,
<&cgu_clk CLK_SYS_UART_REF>, <&cgu_clk CLK_SYS_EBI_REF>,
<&cgu_clk CLK_TUN_ROM>, <&cgu_clk CLK_TUN_PWM>,
<&cgu_clk CLK_TUN_TIMER>;
clock-names = "cpu-pll", "sys-pll",
"tun-pll", "ddr-clk",
"cpu-clk", "hdmi-pll",
"tun-clk", "hdmi-clk",
"apb-clk", "axi-clk",
"eth-clk", "usb-clk",
"sdio-clk", "hdmi-sys-clk",
"gfx-core-clk", "gfx-dma-clk",
"gfx-cfg-clk", "dmac-core-clk",
"dmac-cfg-clk", "sdio-ref-clk",
"spi-clk", "i2c-clk",
"uart-clk", "ebi-clk",
"rom-clk", "pwm-clk",
"timer-clk";
};
cgu_clk: cgu-clk@f0000000 {
compatible = "snps,hsdk-cgu-clock";
reg = <0xf0000000 0x10>, <0xf00014B8 0x4>;
#clock-cells = <1>;
};
cgu_rst: reset-controller@f00008a0 {
compatible = "snps,hsdk-reset";
#reset-cells = <1>;
reg = <0xf00008a0 0x4>, <0xf0000ff0 0x4>;
};
uart0: serial0@f0005000 {
compatible = "snps,dw-apb-uart";
reg = <0xf0005000 0x1000>;
reg-shift = <2>;
reg-io-width = <4>;
};
ethernet@f0008000 {
#interrupt-cells = <1>;
compatible = "snps,arc-dwmac-3.70a";
reg = <0xf0008000 0x2000>;
phy-mode = "gmii";
};
ehci@f0040000 {
compatible = "generic-ehci";
reg = <0xf0040000 0x100>;
/*
* OHCI and EHCI have reset line shared so we don't add
* reset property to OHCI node as it is probed later and
* it will reset sucessfuly probed and configured EHCI HW.
*/
resets = <&cgu_rst HSDK_USB_RESET>;
};
ohci@f0060000 {
compatible = "generic-ohci";
reg = <0xf0060000 0x100>;
};
mmcclk_ciu: mmcclk-ciu {
compatible = "fixed-clock";
/*
* DW sdio controller has external ciu clock divider
* controlled via register in SDIO IP. Due to its
* unexpected default value (it should divide by 1
* but it divides by 8) SDIO IP uses wrong clock and
* works unstable (see STAR 9001204800)
* We switched to the minimum possible value of the
* divisor (div-by-2) in HSDK platform code.
* So default mmcclk ciu clock is 50000000 Hz.
*/
clock-frequency = <50000000>;
#clock-cells = <0>;
};
mmc: mmc0@f000a000 {
compatible = "snps,dw-mshc";
reg = <0xf000a000 0x400>;
bus-width = <4>;
fifo-depth = <256>;
clocks = <&cgu_clk CLK_SYS_SDIO>, <&mmcclk_ciu>;
clock-names = "biu", "ciu";
max-frequency = <25000000>;
};
spi0: spi@f0020000 {
compatible = "snps,dw-apb-ssi";
reg = <0xf0020000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <4000000>;
clocks = <&cgu_clk CLK_SYS_SPI_REF>;
clock-names = "spi_clk";
cs-gpio = <&cs_gpio 0>;
spi_flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <4000000>;
};
};
cs_gpio: gpio@f00014b0 {
compatible = "snps,creg-gpio";
reg = <0xf00014b0 0x4>;
gpio-controller;
#gpio-cells = <1>;
gpio-bank-name = "hsdk-spi-cs";
gpio-count = <1>;
gpio-first-shift = <0>;
gpio-bit-per-line = <2>;
gpio-activate-val = <2>;
gpio-deactivate-val = <3>;
gpio-default-val = <1>;
};
};
|
