blob: 9997e8fc3396b8d1a38b943c51e621f3031eed5d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
|
// SPDX-License-Identifier: GPL-2.0+
/*
*
* (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*/
#include <common.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
void mx31_uart1_hw_init(void)
{
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
}
void mx31_uart2_hw_init(void)
{
/* setup pins for UART2 */
mx31_gpio_mux(MUX_RXD2__UART2_RXD_MUX);
mx31_gpio_mux(MUX_TXD2__UART2_TXD_MUX);
mx31_gpio_mux(MUX_RTS2__UART2_RTS_B);
mx31_gpio_mux(MUX_CTS2__UART2_CTS_B);
}
#ifdef CONFIG_MXC_SPI
/*
* Note: putting several spi setups here makes no sense as they may differ
* at board level (physical pin SS0 of CSPI2 may aswell be used as SS0 of CSPI3)
*/
void mx31_spi2_hw_init(void)
{
/* SPI2 */
mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
/* start SPI2 clock */
__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
}
#endif
|
