1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
* Contributor: Mahavir Jain <mjain@marvell.com>
*/
#include <common.h>
#include <cpu_func.h>
#include <asm/arch/cpu.h>
#include <asm/arch/armada100.h>
#define UARTCLK14745KHZ (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1))
#define SET_MRVL_ID (1<<8)
#define L2C_RAM_SEL (1<<4)
int arch_cpu_init(void)
{
u32 val;
struct armd1cpu_registers *cpuregs =
(struct armd1cpu_registers *) ARMD1_CPU_BASE;
struct armd1apb1_registers *apb1clkres =
(struct armd1apb1_registers *) ARMD1_APBC1_BASE;
struct armd1mpmu_registers *mpmu =
(struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
/* set SEL_MRVL_ID bit in ARMADA100_CPU_CONF register */
val = readl(&cpuregs->cpu_conf);
val = val | SET_MRVL_ID;
writel(val, &cpuregs->cpu_conf);
/* Enable Clocks for all hardware units */
writel(0xFFFFFFFF, &mpmu->acgr);
/* Turn on AIB and AIB-APB Functional clock */
writel(APBC_APBCLK | APBC_FNCLK, &apb1clkres->aib);
/* ensure L2 cache is not mapped as SRAM */
val = readl(&cpuregs->cpu_conf);
val = val & ~(L2C_RAM_SEL);
writel(val, &cpuregs->cpu_conf);
/* Enable GPIO clock */
writel(APBC_APBCLK, &apb1clkres->gpio);
#ifdef CONFIG_I2C_MV
/* Enable general I2C clock */
writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
/* Enable power I2C clock */
writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
#endif
/*
* Enable Functional and APB clock at 14.7456MHz
* for configured UART console
*/
#if (CONFIG_SYS_NS16550_COM1 == ARMD1_UART3_BASE)
writel(UARTCLK14745KHZ, &apb1clkres->uart3);
#elif (CONFIG_SYS_NS16550_COM1 == ARMD1_UART2_BASE)
writel(UARTCLK14745KHZ, &apb1clkres->uart2);
#else
writel(UARTCLK14745KHZ, &apb1clkres->uart1);
#endif
icache_enable();
return 0;
}
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
u32 id;
struct armd1cpu_registers *cpuregs =
(struct armd1cpu_registers *) ARMD1_CPU_BASE;
id = readl(&cpuregs->chip_id);
printf("SoC: Armada 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10));
return 0;
}
#endif
#ifdef CONFIG_I2C_MV
void i2c_clk_enable(void)
{
}
#endif
|
