1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
*/
#include <common.h>
#include <dm.h>
#include <ns16550.h>
#include <dm/platform_data/lpc32xx_hsuart.h>
#include <asm/arch/clk.h>
#include <asm/arch/uart.h>
#include <asm/arch/mux.h>
#include <asm/io.h>
static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
static struct uart_ctrl_regs *ctrl = (struct uart_ctrl_regs *)UART_CTRL_BASE;
static struct mux_regs *mux = (struct mux_regs *)MUX_BASE;
void lpc32xx_uart_init(unsigned int uart_id)
{
if (uart_id < 1 || uart_id > 7)
return;
/* Disable loopback mode, if it is set by S1L bootloader */
clrbits_le32(&ctrl->loop,
UART_LOOPBACK(CONFIG_SYS_LPC32XX_UART));
if (uart_id < 3 || uart_id > 6)
return;
/* Enable UART system clock */
setbits_le32(&clk->uartclk_ctrl, CLK_UART(uart_id));
/* Set UART into autoclock mode */
clrsetbits_le32(&ctrl->clkmode,
UART_CLKMODE_MASK(uart_id),
UART_CLKMODE_AUTO(uart_id));
/* Bypass pre-divider of UART clock */
writel(CLK_UART_X_DIV(1) | CLK_UART_Y_DIV(1),
&clk->u3clk + (uart_id - 3));
}
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct ns16550_platdata lpc32xx_uart[] = {
{ .base = UART3_BASE, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
{ .base = UART4_BASE, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
{ .base = UART5_BASE, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
{ .base = UART6_BASE, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
};
#if defined(CONFIG_LPC32XX_HSUART)
static const struct lpc32xx_hsuart_platdata lpc32xx_hsuart[] = {
{ HS_UART1_BASE, },
{ HS_UART2_BASE, },
{ HS_UART7_BASE, },
};
#endif
U_BOOT_DEVICES(lpc32xx_uarts) = {
#if defined(CONFIG_LPC32XX_HSUART)
{ "lpc32xx_hsuart", &lpc32xx_hsuart[0], },
{ "lpc32xx_hsuart", &lpc32xx_hsuart[1], },
#endif
{ "ns16550_serial", &lpc32xx_uart[0], },
{ "ns16550_serial", &lpc32xx_uart[1], },
{ "ns16550_serial", &lpc32xx_uart[2], },
{ "ns16550_serial", &lpc32xx_uart[3], },
#if defined(CONFIG_LPC32XX_HSUART)
{ "lpc32xx_hsuart", &lpc32xx_hsuart[2], },
#endif
};
#endif
void lpc32xx_dma_init(void)
{
/* Enable DMA interface */
writel(CLK_DMA_ENABLE, &clk->dmaclk_ctrl);
}
void lpc32xx_mac_init(void)
{
/* Enable MAC interface */
writel(CLK_MAC_REG | CLK_MAC_SLAVE | CLK_MAC_MASTER
#if defined(CONFIG_RMII)
| CLK_MAC_RMII,
#else
| CLK_MAC_MII,
#endif
&clk->macclk_ctrl);
}
void lpc32xx_mlc_nand_init(void)
{
/* Enable NAND interface */
writel(CLK_NAND_MLC | CLK_NAND_MLC_INT, &clk->flashclk_ctrl);
}
void lpc32xx_slc_nand_init(void)
{
/* Enable SLC NAND interface */
writel(CLK_NAND_SLC | CLK_NAND_SLC_SELECT, &clk->flashclk_ctrl);
}
void lpc32xx_usb_init(void)
{
/* Do not route the UART 5 Tx/Rx pins to the USB D+ and USB D- pins. */
clrbits_le32(&ctrl->ctrl, UART_CTRL_UART5_USB_MODE);
}
void lpc32xx_i2c_init(unsigned int devnum)
{
/* Enable I2C interface */
uint32_t ctrl = readl(&clk->i2cclk_ctrl);
if (devnum == 1)
ctrl |= CLK_I2C1_ENABLE;
if (devnum == 2)
ctrl |= CLK_I2C2_ENABLE;
writel(ctrl, &clk->i2cclk_ctrl);
}
U_BOOT_DEVICE(lpc32xx_gpios) = {
.name = "gpio_lpc32xx"
};
/* Mux for SCK0, MISO0, MOSI0. We do not use SSEL0. */
#define P_MUX_SET_SSP0 0x1600
void lpc32xx_ssp_init(void)
{
/* Enable SSP0 interface */
writel(CLK_SSP0_ENABLE_CLOCK, &clk->ssp_ctrl);
/* Mux SSP0 pins */
writel(P_MUX_SET_SSP0, &mux->p_mux_set);
}
|
