1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
|
/*
* board.c
*
* Common board functions for AM33XX based boards
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/omap.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mem.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <asm/emif.h>
#include <asm/gpio.h>
#include <i2c.h>
#include <miiphy.h>
#include <cpsw.h>
#include <asm/errno.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/musb.h>
#include <asm/omap_musb.h>
DECLARE_GLOBAL_DATA_PTR;
static const struct gpio_bank gpio_bank_am33xx[4] = {
{ (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
{ (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
{ (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX },
{ (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX },
};
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
int cpu_mmc_init(bd_t *bis)
{
int ret;
ret = omap_mmc_init(0, 0, 0, -1, -1);
if (ret)
return ret;
return omap_mmc_init(1, 0, 0, -1, -1);
}
#endif
void setup_clocks_for_console(void)
{
/* Not yet implemented */
return;
}
/* AM33XX has two MUSB controllers which can be host or gadget */
#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/* USB 2.0 PHY Control */
#define CM_PHY_PWRDN (1 << 0)
#define CM_PHY_OTG_PWRDN (1 << 1)
#define OTGVDET_EN (1 << 19)
#define OTGSESSENDEN (1 << 20)
static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
{
if (on) {
clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
OTGVDET_EN | OTGSESSENDEN);
} else {
clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
}
}
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
.dyn_fifo = 1,
.num_eps = 16,
.ram_bits = 12,
};
#ifdef CONFIG_AM335X_USB0
static void am33xx_otg0_set_phy_power(u8 on)
{
am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
}
struct omap_musb_board_data otg0_board_data = {
.set_phy_power = am33xx_otg0_set_phy_power,
};
static struct musb_hdrc_platform_data otg0_plat = {
.mode = CONFIG_AM335X_USB0_MODE,
.config = &musb_config,
.power = 50,
.platform_ops = &musb_dsps_ops,
.board_data = &otg0_board_data,
};
#endif
#ifdef CONFIG_AM335X_USB1
static void am33xx_otg1_set_phy_power(u8 on)
{
am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
}
struct omap_musb_board_data otg1_board_data = {
.set_phy_power = am33xx_otg1_set_phy_power,
};
static struct musb_hdrc_platform_data otg1_plat = {
.mode = CONFIG_AM335X_USB1_MODE,
.config = &musb_config,
.power = 50,
.platform_ops = &musb_dsps_ops,
.board_data = &otg1_board_data,
};
#endif
#endif
int arch_misc_init(void)
{
#ifdef CONFIG_AM335X_USB0
musb_register(&otg0_plat, &otg0_board_data,
(void *)USB0_OTG_BASE);
#endif
#ifdef CONFIG_AM335X_USB1
musb_register(&otg1_plat, &otg1_board_data,
(void *)USB1_OTG_BASE);
#endif
return 0;
}
#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
void rtc32k_enable(void)
{
struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
writel(0x83e70b13, &rtc->kick0r);
writel(0x95a4f1e0, &rtc->kick1r);
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
}
#define UART_RESET (0x1 << 1)
#define UART_CLK_RUNNING_MASK 0x1
#define UART_SMART_IDLE_EN (0x1 << 0x3)
void uart_soft_reset(void)
{
struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
u32 regval;
regval = readl(&uart_base->uartsyscfg);
regval |= UART_RESET;
writel(regval, &uart_base->uartsyscfg);
while ((readl(&uart_base->uartsyssts) &
UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
;
/* Disable smart idle */
regval = readl(&uart_base->uartsyscfg);
regval |= UART_SMART_IDLE_EN;
writel(regval, &uart_base->uartsyscfg);
}
#endif
|
