1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
|
/*
* sun4i, sun5i and sun7i specific clock code
*
* (C) Copyright 2007-2012
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
* Tom Cubie <tangliang@allwinnertech.com>
*
* (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/sys_proto.h>
#ifdef CONFIG_SPL_BUILD
void clock_init_safe(void)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* Set safe defaults until PMU is configured */
writel(AXI_DIV_1 << AXI_DIV_SHIFT |
AHB_DIV_2 << AHB_DIV_SHIFT |
APB0_DIV_1 << APB0_DIV_SHIFT |
CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
&ccm->cpu_ahb_apb0_cfg);
writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg);
sdelay(200);
writel(AXI_DIV_1 << AXI_DIV_SHIFT |
AHB_DIV_2 << AHB_DIV_SHIFT |
APB0_DIV_1 << APB0_DIV_SHIFT |
CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
&ccm->cpu_ahb_apb0_cfg);
#ifdef CONFIG_SUN7I
setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_DMA);
#endif
writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
#ifdef CONFIG_SUNXI_AHCI
setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_SATA);
setbits_le32(&ccm->pll6_cfg, 0x1 << CCM_PLL6_CTRL_SATA_EN_SHIFT);
#endif
}
#endif
void clock_init_uart(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* uart clock source is apb1 */
writel(APB1_CLK_SRC_OSC24M|
APB1_CLK_RATE_N_1|
APB1_CLK_RATE_M(1),
&ccm->apb1_clk_div_cfg);
/* open the clock for uart */
setbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1));
}
int clock_twi_onoff(int port, int state)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (port > 2)
return -1;
/* set the apb clock gate for twi */
if (state)
setbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
else
clrbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
return 0;
}
#ifdef CONFIG_SPL_BUILD
#define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \
0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \
8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \
0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \
16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \
(P)<< CCM_PLL1_CFG_DIVP_SHIFT | \
2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \
(N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \
(K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \
0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \
0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \
(M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT)
static struct {
u32 pll1_cfg;
unsigned int freq;
} pll1_para[] = {
/* This array must be ordered by frequency. */
{ PLL1_CFG(16, 0, 0, 0), 384000000 },
{ PLL1_CFG(16, 1, 0, 0), 768000000 },
{ PLL1_CFG(20, 1, 0, 0), 960000000 },
{ PLL1_CFG(21, 1, 0, 0), 1008000000},
{ PLL1_CFG(22, 1, 0, 0), 1056000000},
{ PLL1_CFG(23, 1, 0, 0), 1104000000},
{ PLL1_CFG(24, 1, 0, 0), 1152000000},
{ PLL1_CFG(25, 1, 0, 0), 1200000000},
{ PLL1_CFG(26, 1, 0, 0), 1248000000},
{ PLL1_CFG(27, 1, 0, 0), 1296000000},
{ PLL1_CFG(28, 1, 0, 0), 1344000000},
{ PLL1_CFG(29, 1, 0, 0), 1392000000},
{ PLL1_CFG(30, 1, 0, 0), 1440000000},
{ PLL1_CFG(31, 1, 0, 0), 1488000000},
/* Final catchall entry */
{ PLL1_CFG(31, 1, 0, 0), ~0},
};
void clock_set_pll1(unsigned int hz)
{
int i = 0;
int axi, ahb, apb0;
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* Find target frequency */
while (pll1_para[i].freq < hz)
i++;
hz = pll1_para[i].freq;
/* Calculate system clock divisors */
axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */
ahb = DIV_ROUND_UP(hz/axi, 204000000); /* Max 250MHz */
apb0 = 2; /* Max 150MHz */
printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0);
/* Map divisors to register values */
axi = axi - 1;
if (ahb > 4)
ahb = 3;
else if (ahb > 2)
ahb = 2;
else if (ahb > 1)
ahb = 1;
else
ahb = 0;
apb0 = apb0 - 1;
/* Switch to 24MHz clock while changing PLL1 */
writel(AXI_DIV_1 << AXI_DIV_SHIFT |
AHB_DIV_2 << AHB_DIV_SHIFT |
APB0_DIV_1 << APB0_DIV_SHIFT |
CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
&ccm->cpu_ahb_apb0_cfg);
sdelay(20);
/* Configure sys clock divisors */
writel(axi << AXI_DIV_SHIFT |
ahb << AHB_DIV_SHIFT |
apb0 << APB0_DIV_SHIFT |
CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
&ccm->cpu_ahb_apb0_cfg);
/* Configure PLL1 at the desired frequency */
writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg);
sdelay(200);
/* Switch CPU to PLL1 */
writel(axi << AXI_DIV_SHIFT |
ahb << AHB_DIV_SHIFT |
apb0 << APB0_DIV_SHIFT |
CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
&ccm->cpu_ahb_apb0_cfg);
sdelay(20);
}
#endif
unsigned int clock_get_pll5p(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
uint32_t rval = readl(&ccm->pll5_cfg);
int n = ((rval & CCM_PLL5_CTRL_N_MASK) >> CCM_PLL5_CTRL_N_SHIFT);
int k = ((rval & CCM_PLL5_CTRL_K_MASK) >> CCM_PLL5_CTRL_K_SHIFT) + 1;
int p = ((rval & CCM_PLL5_CTRL_P_MASK) >> CCM_PLL5_CTRL_P_SHIFT);
return (24000000 * n * k) >> p;
}
unsigned int clock_get_pll6(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
uint32_t rval = readl(&ccm->pll6_cfg);
int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
return 24000000 * n * k / 2;
}
|
