1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
/*
* Copyright (c) 2011 The Chromium OS Authors.
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* Tegra2 high-level function multiplexing */
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
int funcmux_select(enum periph_id id, int config)
{
int bad_config = config != FUNCMUX_DEFAULT;
switch (id) {
case PERIPH_ID_UART1:
if (config == FUNCMUX_UART1_IRRX_IRTX) {
pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
pinmux_tristate_disable(PINGRP_IRRX);
pinmux_tristate_disable(PINGRP_IRTX);
/*
* Tegra appears to boot with function UARTA pre-
* selected on mux group SDB. If two mux groups are
* both set to the same function, it's unclear which
* group's pins drive the RX signals into the HW.
* For UARTA, SDB certainly overrides group IRTX in
* practice. To solve this, configure some alternative
* function on SDB to avoid the conflict. Also, tri-
* state the group to avoid driving any signal onto it
* until we know what's connected.
*/
pinmux_tristate_enable(PINGRP_SDB);
pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
}
break;
case PERIPH_ID_UART2:
if (config == FUNCMUX_UART2_IRDA) {
pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA);
pinmux_tristate_disable(PINGRP_UAD);
}
break;
case PERIPH_ID_UART4:
if (config == FUNCMUX_UART4_GMC) {
pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
pinmux_tristate_disable(PINGRP_GMC);
}
break;
case PERIPH_ID_DVC_I2C:
/* there is only one selection, pinmux_config is ignored */
if (config == FUNCMUX_DVC_I2CP) {
pinmux_set_func(PINGRP_I2CP, PMUX_FUNC_I2C);
pinmux_tristate_disable(PINGRP_I2CP);
}
break;
case PERIPH_ID_I2C1:
/* support pinmux_config of 0 for now, */
if (config == FUNCMUX_I2C1_RM) {
pinmux_set_func(PINGRP_RM, PMUX_FUNC_I2C);
pinmux_tristate_disable(PINGRP_RM);
}
break;
case PERIPH_ID_I2C2: /* I2C2 */
switch (config) {
case FUNCMUX_I2C2_DDC: /* DDC pin group, select I2C2 */
pinmux_set_func(PINGRP_DDC, PMUX_FUNC_I2C2);
/* PTA to HDMI */
pinmux_set_func(PINGRP_PTA, PMUX_FUNC_HDMI);
pinmux_tristate_disable(PINGRP_DDC);
break;
case FUNCMUX_I2C2_PTA: /* PTA pin group, select I2C2 */
pinmux_set_func(PINGRP_PTA, PMUX_FUNC_I2C2);
/* set DDC_SEL to RSVDx (RSVD2 works for now) */
pinmux_set_func(PINGRP_DDC, PMUX_FUNC_RSVD2);
pinmux_tristate_disable(PINGRP_PTA);
bad_config = 0;
break;
}
break;
case PERIPH_ID_I2C3: /* I2C3 */
/* support pinmux_config of 0 for now */
if (config == FUNCMUX_I2C3_DTF) {
pinmux_set_func(PINGRP_DTF, PMUX_FUNC_I2C3);
pinmux_tristate_disable(PINGRP_DTF);
}
break;
default:
debug("%s: invalid periph_id %d", __func__, id);
return -1;
}
if (bad_config) {
debug("%s: invalid config %d for periph_id %d", __func__,
config, id);
return -1;
}
return 0;
}
|
