1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
|
/*
* (C) Copyright 2015
* Kamil Lulko, <rev13@wp.pl>
*
* Copyright 2015 ATS Advanced Telematics Systems GmbH
* Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/stm32.h>
#define STM32_FLASH_KEY1 0x45670123
#define STM32_FLASH_KEY2 0xcdef89ab
#define STM32_NUM_BANKS 2
#define STM32_MAX_BANK 0x200
flash_info_t flash_info[STM32_NUM_BANKS];
static struct stm32_flash_bank_regs *flash_bank[STM32_NUM_BANKS];
static void stm32f1_flash_lock(u8 bank, u8 lock)
{
if (lock) {
setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_LOCK);
} else {
writel(STM32_FLASH_KEY1, &flash_bank[bank]->keyr);
writel(STM32_FLASH_KEY2, &flash_bank[bank]->keyr);
}
}
/* Only XL devices are supported (2 KiB sector size) */
unsigned long flash_init(void)
{
u8 i, banks;
u16 j, size;
/* Set up accessors for XL devices with wonky register layout */
flash_bank[0] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr;
flash_bank[1] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr2;
/*
* Get total flash size (in KiB) and configure number of banks
* present and sector count per bank.
*/
size = readw(&STM32_DES->flash_size);
if (size <= STM32_MAX_BANK) {
banks = 1;
flash_info[0].sector_count = size >> 1;
} else if (size > STM32_MAX_BANK) {
banks = 2;
flash_info[0].sector_count = STM32_MAX_BANK >> 1;
flash_info[1].sector_count = (size - STM32_MAX_BANK) >> 1;
}
/* Configure start/size for all sectors */
for (i = 0; i < banks; i++) {
flash_info[i].flash_id = FLASH_STM32F1;
flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 19);
flash_info[i].size = 2048;
for (j = 1; (j < flash_info[i].sector_count); j++) {
flash_info[i].start[j] = flash_info[i].start[j - 1]
+ 2048;
flash_info[i].size += 2048;
}
}
return size << 10;
}
void flash_print_info(flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf("Missing or unknown FLASH type\n");
return;
} else if (info->flash_id == FLASH_STM32F1) {
printf("STM32F1 Embedded Flash\n");
}
printf(" Size: %ld MB in %d Sectors\n",
info->size >> 10, info->sector_count);
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
if ((i % 5) == 0)
printf("\n ");
printf(" %08lX%s",
info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf("\n");
return;
}
int flash_erase(flash_info_t *info, int first, int last)
{
u8 bank = 0xff;
int i;
for (i = 0; i < STM32_NUM_BANKS; i++) {
if (info == &flash_info[i]) {
bank = i;
break;
}
}
if (bank == 0xff)
return -1;
stm32f1_flash_lock(bank, 0);
for (i = first; i <= last; i++) {
while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
;
setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER);
writel(info->start[i], &flash_bank[bank]->ar);
setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_STRT);
while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
;
}
clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER);
stm32f1_flash_lock(bank, 1);
return 0;
}
int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong i;
u8 bank = 0xff;
if (addr & 1) {
printf("Flash address must be half word aligned\n");
return -1;
}
if (cnt & 1) {
printf("Flash length must be half word aligned\n");
return -1;
}
for (i = 0; i < 2; i++) {
if (info == &flash_info[i]) {
bank = i;
break;
}
}
if (bank == 0xff)
return -1;
while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
;
stm32f1_flash_lock(bank, 0);
setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG);
/* STM32F1 requires half word writes */
for (i = 0; i < cnt >> 1; i++) {
*(u16 *)(addr + i * 2) = ((u16 *)src)[i];
while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
;
}
clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG);
stm32f1_flash_lock(bank, 1);
return 0;
}
|
