1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for CRS305-1G-4S board
*
* Copyright (C) 2016 Allied Telesis Labs
* Copyright (C) 2020 Sartura Ltd.
*
* Based on armada-xp-db.dts
*
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default
* 0xd0000000). The 0xf1000000 is the default used by the recent,
* DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
* boards were delivered with an older version of the bootloader that
* left internal registers mapped at 0xd0000000. If you are in this
* situation, you should either update your bootloader (preferred
* solution) or the below Device Tree should be adjusted.
*/
/dts-v1/;
#include "armada-xp-98dx3236.dtsi"
#include "armada-xp-crs305-1g-4s-u-boot.dtsi"
/ {
model = "CRS305-1G-4S+";
compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
stdout-path = "serial0:115200n8";
bootargs = "console=ttyS0,115200 earlyprintk";
};
aliases {
spi0 = &spi0;
};
memory {
device_type = "memory";
reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
};
};
&L2 {
arm,parity-enable;
marvell,ecc-enable;
};
&devbus_bootcs {
status = "okay";
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&i2c0 {
clock-frequency = <100000>;
status = "okay";
};
&usb0 {
status = "okay";
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
m25p,fast-read;
partition@u-boot {
reg = <0x00000000 0x001f0000>;
label = "u-boot";
};
partition@u-boot-env {
reg = <0x001f0000 0x00010000>;
label = "u-boot-env";
};
partition@ubi1 {
reg = <0x00200000 0x00e00000>;
label = "ubi1";
};
};
};
|
