path: root/arch/arm/dts/da850.dtsi

/*
 * Copyright 2012 DENX Software Engineering GmbH
 * Heiko Schocher <hs@denx.de>
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>

/ {
	arm {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		intc: interrupt-controller@fffee000 {
			compatible = "ti,cp-intc";
			interrupt-controller;
			#interrupt-cells = <1>;
			ti,intc-size = <101>;
			reg = <0xfffee000 0x2000>;
		};
	};
	dsp: dsp@11800000 {
		compatible = "ti,da850-dsp";
		reg = <0x11800000 0x40000>,
		      <0x11e00000 0x8000>,
		      <0x11f00000 0x8000>,
		      <0x01c14044 0x4>,
		      <0x01c14174 0x8>;
		reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
		interrupt-parent = <&intc>;
		interrupts = <28>;
		status = "disabled";
	};
	soc@1c00000 {
		compatible = "simple-bus";
		model = "da850";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x01c00000 0x400000>;
		interrupt-parent = <&intc>;

		pmx_core: pinmux@14120 {
			compatible = "pinctrl-single";
			reg = <0x14120 0x50>;
			#address-cells = <1>;
			#size-cells = <0>;
			#pinctrl-cells = <2>;
			pinctrl-single,bit-per-mux;
			pinctrl-single,register-width = <32>;
			pinctrl-single,function-mask = <0xf>;
			status = "disabled";

			serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
				pinctrl-single,bits = <
					/* UART0_RTS UART0_CTS */
					0x0c 0x22000000 0xff000000
				>;
			};
			serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
				pinctrl-single,bits = <
					/* UART0_TXD UART0_RXD */
					0x0c 0x00220000 0x00ff0000
				>;
			};
			serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
				pinctrl-single,bits = <
					/* UART1_CTS UART1_RTS */
					0x00 0x00440000 0x00ff0000
				>;
			};
			serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
				pinctrl-single,bits = <
					/* UART1_TXD UART1_RXD */
					0x10 0x22000000 0xff000000
				>;
			};
			serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
				pinctrl-single,bits = <
					/* UART2_CTS UART2_RTS */
					0x00 0x44000000 0xff000000
				>;
			};
			serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
				pinctrl-single,bits = <
					/* UART2_TXD UART2_RXD */
					0x10 0x00220000 0x00ff0000
				>;
			};
			i2c0_pins: pinmux_i2c0_pins {
				pinctrl-single,bits = <
					/* I2C0_SDA,I2C0_SCL */
					0x10 0x00002200 0x0000ff00
				>;
			};
			i2c1_pins: pinmux_i2c1_pins {
				pinctrl-single,bits = <
					/* I2C1_SDA, I2C1_SCL */
					0x10 0x00440000 0x00ff0000
				>;
			};
			mmc0_pins: pinmux_mmc_pins {
				pinctrl-single,bits = <
					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
					 * MMCSD0_CMD    MMCSD0_CLK
					 */
					0x28 0x00222222  0x00ffffff
				>;
			};
			ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
				pinctrl-single,bits = <
					/* EPWM0A */
					0xc 0x00000002 0x0000000f
				>;
			};
			ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
				pinctrl-single,bits = <
					/* EPWM0B */
					0xc 0x00000020 0x000000f0
				>;
			};
			ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
				pinctrl-single,bits = <
					/* EPWM1A */
					0x14 0x00000002 0x0000000f
				>;
			};
			ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
				pinctrl-single,bits = <
					/* EPWM1B */
					0x14 0x00000020 0x000000f0
				>;
			};
			ecap0_pins: pinmux_ecap0_pins {
				pinctrl-single,bits = <
					/* ECAP0_APWM0 */
					0x8 0x20000000 0xf0000000
				>;
			};
			ecap1_pins: pinmux_ecap1_pins {
				pinctrl-single,bits = <
					/* ECAP1_APWM1 */
					0x4 0x40000000 0xf0000000
				>;
			};
			ecap2_pins: pinmux_ecap2_pins {
				pinctrl-single,bits = <
					/* ECAP2_APWM2 */
					0x4 0x00000004 0x0000000f
				>;
			};
			spi0_pins: pinmux_spi0_pins {
				pinctrl-single,bits = <
					/* SIMO, SOMI, CLK */
					0xc 0x00001101 0x0000ff0f
				>;
			};
			spi0_cs0_pin: pinmux_spi0_cs0 {
				pinctrl-single,bits = <
					/* CS0 */
					0x10 0x00000010 0x000000f0
				>;
			};
			spi0_cs3_pin: pinmux_spi0_cs3_pin {
				pinctrl-single,bits = <
					/* CS3 */
					0xc 0x01000000 0x0f000000
				>;
			};
			spi1_pins: pinmux_spi1_pins {
				pinctrl-single,bits = <
					/* SIMO, SOMI, CLK */
					0x14 0x00110100 0x00ff0f00
				>;
			};
			spi1_cs0_pin: pinmux_spi1_cs0 {
				pinctrl-single,bits = <
					/* CS0 */
					0x14 0x00000010 0x000000f0
				>;
			};
			mdio_pins: pinmux_mdio_pins {
				pinctrl-single,bits = <
					/* MDIO_CLK, MDIO_D */
					0x10 0x00000088 0x000000ff
				>;
			};
			mii_pins: pinmux_mii_pins {
				pinctrl-single,bits = <
					/*
					 * MII_TXEN, MII_TXCLK, MII_COL
					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
					 * MII_TXD_0
					 */
					0x8 0x88888880 0xfffffff0
					/*
					 * MII_RXER, MII_CRS, MII_RXCLK
					 * MII_RXDV, MII_RXD_3, MII_RXD_2
					 * MII_RXD_1, MII_RXD_0
					 */
					0xc 0x88888888 0xffffffff
				>;
			};
			lcd_pins: pinmux_lcd_pins {
				pinctrl-single,bits = <
					/*
					 * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
					 * LCD_D[6], LCD_D[7]
					 */
					0x40 0x22222200 0xffffff00
					/*
					 * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
					 * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
					 */
					0x44 0x22222222 0xffffffff
					/* LCD_D[8], LCD_D[9] */
					0x48 0x00000022 0x000000ff

					/* LCD_PCLK */
					0x48 0x02000000 0x0f000000
					/* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
					0x4c 0x02000022 0x0f0000ff
				>;
			};
			vpif_capture_pins: vpif_capture_pins {
				pinctrl-single,bits = <
					/* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
					0x38 0x11111111 0xffffffff
					/* VP_DIN[10..15,0..1] */
					0x3c 0x11111111 0xffffffff
					/* VP_DIN[8..9] */
					0x40 0x00000011 0x000000ff
				>;
			};
			vpif_display_pins: vpif_display_pins {
				pinctrl-single,bits = <
					/* VP_DOUT[2..7] */
					0x40 0x11111100 0xffffff00
					/* VP_DOUT[10..15,0..1] */
					0x44 0x11111111 0xffffffff
					/*  VP_DOUT[8..9] */
					0x48 0x00000011 0x000000ff
					/*
					 * VP_CLKOUT3, VP_CLKIN3,
					 * VP_CLKOUT2, VP_CLKIN2
					 */
					0x4c 0x00111100 0x00ffff00
				>;
			};
		};
		prictrl: priority-controller@14110 {
			compatible = "ti,da850-mstpri";
			reg = <0x14110 0x0c>;
			status = "disabled";
		};
		cfgchip: chip-controller@1417c {
			compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
			reg = <0x1417c 0x14>;

			usb_phy: usb-phy {
				compatible = "ti,da830-usb-phy";
				#phy-cells = <1>;
				status = "disabled";
			};
		};
		edma0: edma@0 {
			compatible = "ti,edma3-tpcc";
			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
			reg =	<0x0 0x8000>;
			reg-names = "edma3_cc";
			interrupts = <11 12>;
			interrupt-names = "edma3_ccint", "edma3_ccerrint";
			#dma-cells = <2>;

			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
		};
		edma0_tptc0: tptc@8000 {
			compatible = "ti,edma3-tptc";
			reg =	<0x8000 0x400>;
			interrupts = <13>;
			interrupt-names = "edm3_tcerrint";
		};
		edma0_tptc1: tptc@8400 {
			compatible = "ti,edma3-tptc";
			reg =	<0x8400 0x400>;
			interrupts = <32>;
			interrupt-names = "edm3_tcerrint";
		};
		edma1: edma@230000 {
			compatible = "ti,edma3-tpcc";
			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
			reg =	<0x230000 0x8000>;
			reg-names = "edma3_cc";
			interrupts = <93 94>;
			interrupt-names = "edma3_ccint", "edma3_ccerrint";
			#dma-cells = <2>;

			ti,tptcs = <&edma1_tptc0 7>;
		};
		edma1_tptc0: tptc@238000 {
			compatible = "ti,edma3-tptc";
			reg =	<0x238000 0x400>;
			interrupts = <95>;
			interrupt-names = "edm3_tcerrint";
		};
		serial0: serial@42000 {
			compatible = "ti,da830-uart", "ns16550a";
			reg = <0x42000 0x100>;
			reg-io-width = <4>;
			reg-shift = <2>;
			interrupts = <25>;
			status = "disabled";
		};
		serial1: serial@10c000 {
			compatible = "ti,da830-uart", "ns16550a";
			reg = <0x10c000 0x100>;
			reg-io-width = <4>;
			reg-shift = <2>;
			interrupts = <53>;
			status = "disabled";
		};
		serial2: serial@10d000 {
			compatible = "ti,da830-uart", "ns16550a";
			reg = <0x10d000 0x100>;
			reg-io-width = <4>;
			reg-shift = <2>;
			interrupts = <61>;
			status = "disabled";
		};
		rtc0: rtc@23000 {
			compatible = "ti,da830-rtc";
			reg = <0x23000 0x1000>;
			interrupts = <19
				      19>;
			status = "disabled";
		};
		i2c0: i2c@22000 {
			compatible = "ti,davinci-i2c";
			reg = <0x22000 0x1000>;
			interrupts = <15>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		i2c1: i2c@228000 {
			compatible = "ti,davinci-i2c";
			reg = <0x228000 0x1000>;
			interrupts = <51>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		wdt: wdt@21000 {
			compatible = "ti,davinci-wdt";
			reg = <0x21000 0x1000>;
			status = "disabled";
		};
		mmc0: mmc@40000 {
			compatible = "ti,da830-mmc";
			reg = <0x40000 0x1000>;
			cap-sd-highspeed;
			cap-mmc-highspeed;
			interrupts = <16>;
			dmas = <&edma0 16 0>, <&edma0 17 0>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		vpif: video@217000 {
			compatible = "ti,da850-vpif";
			reg = <0x217000 0x1000>;
			interrupts = <92>;
			status = "disabled";

			/* VPIF capture port */
			port@0 {
				#address-cells = <1>;
				#size-cells = <0>;
			};

			/* VPIF display port */
			port@1 {
				#address-cells = <1>;
				#size-cells = <0>;
			};
		};
		mmc1: mmc@21b000 {
			compatible = "ti,da830-mmc";
			reg = <0x21b000 0x1000>;
			cap-sd-highspeed;
			cap-mmc-highspeed;
			interrupts = <72>;
			dmas = <&edma1 28 0>, <&edma1 29 0>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		ehrpwm0: pwm@300000 {
			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
				     "ti,am33xx-ehrpwm";
			#pwm-cells = <3>;
			reg = <0x300000 0x2000>;
			status = "disabled";
		};
		ehrpwm1: pwm@302000 {
			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
				     "ti,am33xx-ehrpwm";
			#pwm-cells = <3>;
			reg = <0x302000 0x2000>;
			status = "disabled";
		};
		ecap0: ecap@306000 {
			compatible = "ti,da850-ecap", "ti,am3352-ecap",
				     "ti,am33xx-ecap";
			#pwm-cells = <3>;
			reg = <0x306000 0x80>;
			status = "disabled";
		};
		ecap1: ecap@307000 {
			compatible = "ti,da850-ecap", "ti,am3352-ecap",
				     "ti,am33xx-ecap";
			#pwm-cells = <3>;
			reg = <0x307000 0x80>;
			status = "disabled";
		};
		ecap2: ecap@308000 {
			compatible = "ti,da850-ecap", "ti,am3352-ecap",
				     "ti,am33xx-ecap";
			#pwm-cells = <3>;
			reg = <0x308000 0x80>;
			status = "disabled";
		};
		spi0: spi@41000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "ti,da830-spi";
			reg = <0x41000 0x1000>;
			num-cs = <6>;
			ti,davinci-spi-intr-line = <1>;
			interrupts = <20>;
			dmas = <&edma0 14 0>, <&edma0 15 0>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		spi1: spi@30e000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "ti,da830-spi";
			reg = <0x30e000 0x1000>;
			num-cs = <4>;
			ti,davinci-spi-intr-line = <1>;
			interrupts = <56>;
			dmas = <&edma0 18 0>, <&edma0 19 0>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		usb0: usb@200000 {
			compatible = "ti,da830-musb";
			reg = <0x200000 0x1000>;
			ranges;
			interrupts = <58>;
			interrupt-names = "mc";
			dr_mode = "otg";
			phys = <&usb_phy 0>;
			phy-names = "usb-phy";
			status = "disabled";

			#address-cells = <1>;
			#size-cells = <1>;

			dmas = <&cppi41dma 0 0 &cppi41dma 1 0
				&cppi41dma 2 0 &cppi41dma 3 0
				&cppi41dma 0 1 &cppi41dma 1 1
				&cppi41dma 2 1 &cppi41dma 3 1>;
			dma-names =
				"rx1", "rx2", "rx3", "rx4",
				"tx1", "tx2", "tx3", "tx4";

			cppi41dma: dma-controller@201000 {
				compatible = "ti,da830-cppi41";
				reg =  <0x201000 0x1000
					0x202000 0x1000
					0x204000 0x4000>;
				reg-names = "controller",
					    "scheduler", "queuemgr";
				interrupts = <58>;
				#dma-cells = <2>;
				#dma-channels = <4>;
				status = "okay";
			};
		};
		sata: sata@218000 {
			compatible = "ti,da850-ahci";
			reg = <0x218000 0x2000>, <0x22c018 0x4>;
			interrupts = <67>;
			status = "disabled";
		};
		mdio: mdio@224000 {
			compatible = "ti,davinci_mdio";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x224000 0x1000>;
			status = "disabled";
		};
		eth0: ethernet@220000 {
			compatible = "ti,davinci-dm6467-emac";
			reg = <0x220000 0x4000>;
			ti,davinci-ctrl-reg-offset = <0x3000>;
			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
			ti,davinci-ctrl-ram-offset = <0>;
			ti,davinci-ctrl-ram-size = <0x2000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <33
					34
					35
					36
					>;
			status = "disabled";
		};
		usb1: usb@225000 {
			compatible = "ti,da830-ohci";
			reg = <0x225000 0x1000>;
			interrupts = <59>;
			phys = <&usb_phy 1>;
			phy-names = "usb-phy";
			status = "disabled";
		};
		gpio: gpio@226000 {
			compatible = "ti,dm6441-gpio";
			gpio-controller;
			#gpio-cells = <2>;
			reg = <0x226000 0x1000>;
			interrupts = <42 IRQ_TYPE_EDGE_BOTH
				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
				45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
				47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
			ti,ngpio = <144>;
			ti,davinci-gpio-unbanked = <0>;
			status = "disabled";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
		pinconf: pin-controller@22c00c {
			compatible = "ti,da850-pupd";
			reg = <0x22c00c 0x8>;
			status = "disabled";
		};

		mcasp0: mcasp@100000 {
			compatible = "ti,da830-mcasp-audio";
			reg = <0x100000 0x2000>,
			      <0x102000 0x400000>;
			reg-names = "mpu", "dat";
			interrupts = <54>;
			interrupt-names = "common";
			status = "disabled";
			dmas = <&edma0 1 1>,
				<&edma0 0 1>;
			dma-names = "tx", "rx";
		};

		lcdc: display@213000 {
			compatible = "ti,da850-tilcdc";
			reg = <0x213000 0x1000>;
			interrupts = <52>;
			max-pixelclock = <37500>;
			status = "disabled";
		};
	};
	aemif: aemif@68000000 {
		compatible = "ti,da850-aemif";
		#address-cells = <2>;
		#size-cells = <1>;

		reg = <0x68000000 0x00008000>;
		ranges = <0 0 0x60000000 0x08000000
			  1 0 0x68000000 0x00008000>;
		status = "disabled";
	};
	memctrl: memory-controller@b0000000 {
		compatible = "ti,da850-ddr-controller";
		reg = <0xb0000000 0xe8>;
		status = "disabled";
	};
};