1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
|
// SPDX-License-Identifier: (GPL-2.0)
/*
* support for the imx6 based aristainetos2c board
*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
*
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/imx6qdl-clock.h>
#include "imx6qdl-aristainetos2-common.dtsi"
/ {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio>;
LED_blue {
label = "led_blue";
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
};
LED_green {
label = "led_green";
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
};
LED_red {
label = "led_red";
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
};
LED_yellow {
label = "led_yellow";
gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
};
LED_ena {
label = "led_ena";
gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
};
};
};
&ecspi1 {
fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
&gpio4 10 GPIO_ACTIVE_HIGH
&gpio4 11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&ecspi4 {
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
status = "okay";
};
&i2c1 {
tpm@20 {
compatible = "infineon,slb9645tt";
reg = <0x20>;
};
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
no-1-8-v;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <8>;
no-1-8-v;
non-removable;
status = "okay";
};
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
/* SS0# */
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
/* SS1# */
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
/* SS2# */
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
/* WP pin NOR Flash */
MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
/* Flash nReset */
MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0
>;
};
pinctrl_ecspi4: ecspi4grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
>;
};
pinctrl_gpio: gpiogrp {
fsl,pins = <
/* led enable */
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0
/* LCD power enable */
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0
/* led yellow */
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0
/* led red */
MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0
/* led green */
MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0
/* led blue */
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0
/* Profibus IRQ */
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
/* FPGA IRQ currently unused*/
MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0
/* Display reset because of clock failure */
MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0
/* spi bus #2 SS driver enable */
MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
/* RST_LOC# PHY reset input (has pull-down!)*/
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0
/* Touchscreen IRQ */
MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
/* PCIe reset */
MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0
/* make sure pin is GPIO and not ENET_REF_CLK */
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0
/* TPM PP */
MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x4001b0b0
/* TPM Reset */
MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
/* SD1 card detect input */
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
/* SD1 write protect input */
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
>;
};
};
|
