blob: dbbf29a0dbf6d99c008b8f4851e4b27af4b7f513 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
/dts-v1/;
#include "meson-sm1.dtsi"
#include "meson-khadas-vim3.dtsi"
/ {
compatible = "khadas,vim3l", "amlogic,sm1";
model = "Khadas VIM3L";
vddcpu: regulator-vddcpu {
/*
* Silergy SY8030DEC Regulator.
*/
compatible = "pwm-regulator";
regulator-name = "VDDCPU";
regulator-min-microvolt = <690000>;
regulator-max-microvolt = <1050000>;
vin-supply = <&vsys_3v3>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
regulator-always-on;
};
};
&cpu0 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu1 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU1_CLK>;
clock-latency = <50000>;
};
&cpu2 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU2_CLK>;
clock-latency = <50000>;
};
&cpu3 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU3_CLK>;
clock-latency = <50000>;
};
&pwm_AO_cd {
pinctrl-0 = <&pwm_ao_d_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin1";
status = "okay";
};
/*
* The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
* lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
* an USB3.0 Type A connector and a M.2 Key M slot.
* The PHY driving these differential lines is shared between
* the USB3.0 controller and the PCIe Controller, thus only
* a single controller can use it.
* If the MCU is configured to mux the PCIe/USB3.0 differential lines
* to the M.2 Key M slot, uncomment the following block to disable
* USB3.0 from the USB Complex and enable the PCIe controller.
* The End User is not expected to uncomment the following except for
* testing purposes, but instead rely on the firmware/bootloader to
* update these nodes accordingly if PCIe mode is selected by the MCU.
*/
/*
&pcie {
status = "okay";
};
&usb {
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
};
*/
|
