1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
// SPDX-License-Identifier: GPL-2.0+
/*
* National Semiconductor DP83848 PHY Driver for TI DaVinci
* (TMS320DM644x) based boards.
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* --------------------------------------------------------
*/
#include <common.h>
#include <net.h>
#include <dp83848.h>
#include <asm/arch/emac_defs.h>
#include "../../../drivers/net/ti/davinci_emac.h"
#ifdef CONFIG_DRIVER_TI_EMAC
#ifdef CONFIG_CMD_NET
int dp83848_is_phy_connected(int phy_addr)
{
u_int16_t id1, id2;
if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
return(0);
if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
return(0);
if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
return(1);
return(0);
}
int dp83848_get_link_speed(int phy_addr)
{
u_int16_t tmp;
volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
return(0);
if (!(tmp & DP83848_LINK_STATUS)) /* link up? */
return(0);
if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
return(0);
/* Speed doesn't matter, there is no setting for it in EMAC... */
if (tmp & DP83848_DUPLEX) {
/* set DM644x EMAC for Full Duplex */
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
} else {
/*set DM644x EMAC for Half Duplex */
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
}
return(1);
}
int dp83848_init_phy(int phy_addr)
{
int ret = 1;
if (!dp83848_get_link_speed(phy_addr)) {
/* Try another time */
udelay(100000);
ret = dp83848_get_link_speed(phy_addr);
}
/* Disable PHY Interrupts */
davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
return(ret);
}
int dp83848_auto_negotiate(int phy_addr)
{
u_int16_t tmp;
if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
return(0);
/* Restart Auto_negotiation */
tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */
tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */
davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/* Set the Auto_negotiation Advertisement Register
* MII advertising for Next page, 100BaseTxFD and HD,
* 10BaseTFD and HD, IEEE 802.3
*/
tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
/* Read Control Register */
if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
return(0);
tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/* Restart Auto_negotiation */
tmp |= DP83848_RESTART_AUTONEG;
davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/*check AutoNegotiate complete */
udelay(10000);
if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
return(0);
if (!(tmp & DP83848_AUTONEG_COMP))
return(0);
return (dp83848_get_link_speed(phy_addr));
}
#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_ETHER */
|
