1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
|
// SPDX-License-Identifier: GPL-2.0+
/*
*Copyright (c) 2018 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <malloc.h>
#include <asm/io.h>
#include <asm/arch/grf_rk3308.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/gpio.h>
#include <debug_uart.h>
DECLARE_GLOBAL_DATA_PTR;
#include <asm/armv8/mmu.h>
static struct mm_region rk3308_mem_map[] = {
{
.virt = 0x0UL,
.phys = 0x0UL,
.size = 0xff000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
.virt = 0xff000000UL,
.phys = 0xff000000UL,
.size = 0x01000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = rk3308_mem_map;
#define GRF_BASE 0xff000000
#define SGRF_BASE 0xff2b0000
enum {
GPIO1C7_SHIFT = 8,
GPIO1C7_MASK = GENMASK(11, 8),
GPIO1C7_GPIO = 0,
GPIO1C7_UART1_RTSN,
GPIO1C7_UART2_TX_M0,
GPIO1C7_SPI2_MOSI,
GPIO1C7_JTAG_TMS,
GPIO1C6_SHIFT = 4,
GPIO1C6_MASK = GENMASK(7, 4),
GPIO1C6_GPIO = 0,
GPIO1C6_UART1_CTSN,
GPIO1C6_UART2_RX_M0,
GPIO1C6_SPI2_MISO,
GPIO1C6_JTAG_TCLK,
GPIO4D3_SHIFT = 6,
GPIO4D3_MASK = GENMASK(7, 6),
GPIO4D3_GPIO = 0,
GPIO4D3_SDMMC_D3,
GPIO4D3_UART2_TX_M1,
GPIO4D2_SHIFT = 4,
GPIO4D2_MASK = GENMASK(5, 4),
GPIO4D2_GPIO = 0,
GPIO4D2_SDMMC_D2,
GPIO4D2_UART2_RX_M1,
UART2_IO_SEL_SHIFT = 2,
UART2_IO_SEL_MASK = GENMASK(3, 2),
UART2_IO_SEL_M0 = 0,
UART2_IO_SEL_M1,
UART2_IO_SEL_USB,
GPIO2C0_SEL_SRC_CTRL_SHIFT = 11,
GPIO2C0_SEL_SRC_CTRL_MASK = BIT(11),
GPIO2C0_SEL_SRC_CTRL_IOMUX = 0,
GPIO2C0_SEL_SRC_CTRL_SEL_PLUS,
GPIO3B3_SEL_SRC_CTRL_SHIFT = 7,
GPIO3B3_SEL_SRC_CTRL_MASK = BIT(7),
GPIO3B3_SEL_SRC_CTRL_IOMUX = 0,
GPIO3B3_SEL_SRC_CTRL_SEL_PLUS,
GPIO3B3_SEL_PLUS_SHIFT = 4,
GPIO3B3_SEL_PLUS_MASK = GENMASK(6, 4),
GPIO3B3_SEL_PLUS_GPIO3_B3 = 0,
GPIO3B3_SEL_PLUS_FLASH_ALE,
GPIO3B3_SEL_PLUS_EMMC_PWREN,
GPIO3B3_SEL_PLUS_SPI1_CLK,
GPIO3B3_SEL_PLUS_LCDC_D23_M1,
GPIO3B2_SEL_SRC_CTRL_SHIFT = 3,
GPIO3B2_SEL_SRC_CTRL_MASK = BIT(3),
GPIO3B2_SEL_SRC_CTRL_IOMUX = 0,
GPIO3B2_SEL_SRC_CTRL_SEL_PLUS,
GPIO3B2_SEL_PLUS_SHIFT = 0,
GPIO3B2_SEL_PLUS_MASK = GENMASK(2, 0),
GPIO3B2_SEL_PLUS_GPIO3_B2 = 0,
GPIO3B2_SEL_PLUS_FLASH_RDN,
GPIO3B2_SEL_PLUS_EMMC_RSTN,
GPIO3B2_SEL_PLUS_SPI1_MISO,
GPIO3B2_SEL_PLUS_LCDC_D22_M1,
I2C3_IOFUNC_SRC_CTRL_SHIFT = 10,
I2C3_IOFUNC_SRC_CTRL_MASK = BIT(10),
I2C3_IOFUNC_SRC_CTRL_SEL_PLUS = 1,
GPIO2A3_SEL_SRC_CTRL_SHIFT = 7,
GPIO2A3_SEL_SRC_CTRL_MASK = BIT(7),
GPIO2A3_SEL_SRC_CTRL_SEL_PLUS = 1,
GPIO2A2_SEL_SRC_CTRL_SHIFT = 3,
GPIO2A2_SEL_SRC_CTRL_MASK = BIT(3),
GPIO2A2_SEL_SRC_CTRL_SEL_PLUS = 1,
};
enum {
IOVSEL3_CTRL_SHIFT = 8,
IOVSEL3_CTRL_MASK = BIT(8),
VCCIO3_SEL_BY_GPIO = 0,
VCCIO3_SEL_BY_IOVSEL3,
IOVSEL3_SHIFT = 3,
IOVSEL3_MASK = BIT(3),
VCCIO3_3V3 = 0,
VCCIO3_1V8,
};
/*
* The voltage of VCCIO3(which is the voltage domain of emmc/flash/sfc
* interface) can indicated by GPIO0_A4 or io_vsel3. The SOC defaults
* use GPIO0_A4 to indicate power supply voltage for VCCIO3 by hardware,
* then we can switch to io_vsel3 after system power on, and release GPIO0_A4
* for other usage.
*/
#define GPIO0_A4 4
int rk_board_init(void)
{
static struct rk3308_grf * const grf = (void *)GRF_BASE;
u32 val;
int ret;
ret = gpio_request(GPIO0_A4, "gpio0_a4");
if (ret < 0) {
printf("request for gpio0_a4 failed:%d\n", ret);
return 0;
}
gpio_direction_input(GPIO0_A4);
if (gpio_get_value(GPIO0_A4))
val = VCCIO3_SEL_BY_IOVSEL3 << IOVSEL3_CTRL_SHIFT |
VCCIO3_1V8 << IOVSEL3_SHIFT;
else
val = VCCIO3_SEL_BY_IOVSEL3 << IOVSEL3_CTRL_SHIFT |
VCCIO3_3V3 << IOVSEL3_SHIFT;
rk_clrsetreg(&grf->soc_con0, IOVSEL3_CTRL_MASK | IOVSEL3_MASK, val);
gpio_free(GPIO0_A4);
return 0;
}
#if defined(CONFIG_DEBUG_UART)
__weak void board_debug_uart_init(void)
{
static struct rk3308_grf * const grf = (void *)GRF_BASE;
/* Enable early UART2 channel m1 on the rk3308 */
rk_clrsetreg(&grf->soc_con5, UART2_IO_SEL_MASK,
UART2_IO_SEL_M1 << UART2_IO_SEL_SHIFT);
rk_clrsetreg(&grf->gpio4d_iomux,
GPIO4D3_MASK | GPIO4D2_MASK,
GPIO4D2_UART2_RX_M1 << GPIO4D2_SHIFT |
GPIO4D3_UART2_TX_M1 << GPIO4D3_SHIFT);
}
#endif
#if defined(CONFIG_SPL_BUILD)
int arch_cpu_init(void)
{
static struct rk3308_sgrf * const sgrf = (void *)SGRF_BASE;
static struct rk3308_grf * const grf = (void *)GRF_BASE;
/* Set CRYPTO SDMMC EMMC NAND SFC USB master bus to be secure access */
rk_clrreg(&sgrf->con_secure0, 0x2b83);
/*
* Enable plus options to use more pinctrl functions, including
* GPIO2A2_PLUS, GPIO2A3_PLUS and I2C3_MULTI_SRC_PLUS.
*/
rk_clrsetreg(&grf->soc_con13,
I2C3_IOFUNC_SRC_CTRL_MASK | GPIO2A3_SEL_SRC_CTRL_MASK |
GPIO2A2_SEL_SRC_CTRL_MASK,
I2C3_IOFUNC_SRC_CTRL_SEL_PLUS << I2C3_IOFUNC_SRC_CTRL_SHIFT |
GPIO2A3_SEL_SRC_CTRL_SEL_PLUS << GPIO2A3_SEL_SRC_CTRL_SHIFT |
GPIO2A2_SEL_SRC_CTRL_SEL_PLUS << GPIO2A2_SEL_SRC_CTRL_SHIFT);
/* Plus options about GPIO3B2_PLUS, GPIO3B3_PLUS and GPIO2C0_PLUS. */
rk_clrsetreg(&grf->soc_con15,
GPIO2C0_SEL_SRC_CTRL_MASK | GPIO3B3_SEL_SRC_CTRL_MASK |
GPIO3B2_SEL_SRC_CTRL_MASK,
GPIO2C0_SEL_SRC_CTRL_SEL_PLUS << GPIO2C0_SEL_SRC_CTRL_SHIFT |
GPIO3B3_SEL_SRC_CTRL_SEL_PLUS << GPIO3B3_SEL_SRC_CTRL_SHIFT |
GPIO3B2_SEL_SRC_CTRL_SEL_PLUS << GPIO3B2_SEL_SRC_CTRL_SHIFT);
return 0;
}
#endif
|
