1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2016 Rockchip Electronics Co., Ltd
* Copyright (c) 2016 Andreas Färber
*/
#include <common.h>
#include <syscon.h>
#include <asm/armv8/mmu.h>
#include <asm/io.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/cru_rk3368.h>
#include <asm/arch-rockchip/grf_rk3368.h>
#include <asm/arch-rockchip/hardware.h>
DECLARE_GLOBAL_DATA_PTR;
#define IMEM_BASE 0xFF8C0000
/* Max MCU's SRAM value is 8K, begin at (IMEM_BASE + 4K) */
#define MCU_SRAM_BASE (IMEM_BASE + 1024 * 4)
#define MCU_SRAM_BASE_BIT31_BIT28 ((MCU_SRAM_BASE & GENMASK(31, 28)) >> 28)
#define MCU_SRAM_BASE_BIT27_BIT12 ((MCU_SRAM_BASE & GENMASK(27, 12)) >> 12)
/* exsram may using by mcu to accessing dram(0x0-0x20000000) */
#define MCU_EXSRAM_BASE (0)
#define MCU_EXSRAM_BASE_BIT31_BIT28 ((MCU_EXSRAM_BASE & GENMASK(31, 28)) >> 28)
#define MCU_EXSRAM_BASE_BIT27_BIT12 ((MCU_EXSRAM_BASE & GENMASK(27, 12)) >> 12)
/* experi no used, reserved value = 0 */
#define MCU_EXPERI_BASE (0)
#define MCU_EXPERI_BASE_BIT31_BIT28 ((MCU_EXPERI_BASE & GENMASK(31, 28)) >> 28)
#define MCU_EXPERI_BASE_BIT27_BIT12 ((MCU_EXPERI_BASE & GENMASK(27, 12)) >> 12)
static struct mm_region rk3368_mem_map[] = {
{
.virt = 0x0UL,
.phys = 0x0UL,
.size = 0x80000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
.virt = 0xf0000000UL,
.phys = 0xf0000000UL,
.size = 0x10000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = rk3368_mem_map;
int dram_init_banksize(void)
{
size_t max_size = min((unsigned long)gd->ram_size, gd->ram_top);
/* Reserve 0x200000 for ATF bl31 */
gd->bd->bi_dram[0].start = 0x200000;
gd->bd->bi_dram[0].size = max_size - gd->bd->bi_dram[0].start;
return 0;
}
#ifdef CONFIG_ARCH_EARLY_INIT_R
static int mcu_init(void)
{
struct rk3368_grf *grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
struct rk3368_cru *cru = rockchip_get_cru();
rk_clrsetreg(&grf->soc_con14, MCU_SRAM_BASE_BIT31_BIT28_MASK,
MCU_SRAM_BASE_BIT31_BIT28 << MCU_SRAM_BASE_BIT31_BIT28_SHIFT);
rk_clrsetreg(&grf->soc_con11, MCU_SRAM_BASE_BIT27_BIT12_MASK,
MCU_SRAM_BASE_BIT27_BIT12 << MCU_SRAM_BASE_BIT27_BIT12_SHIFT);
rk_clrsetreg(&grf->soc_con14, MCU_EXSRAM_BASE_BIT31_BIT28_MASK,
MCU_EXSRAM_BASE_BIT31_BIT28 << MCU_EXSRAM_BASE_BIT31_BIT28_SHIFT);
rk_clrsetreg(&grf->soc_con12, MCU_EXSRAM_BASE_BIT27_BIT12_MASK,
MCU_EXSRAM_BASE_BIT27_BIT12 << MCU_EXSRAM_BASE_BIT27_BIT12_SHIFT);
rk_clrsetreg(&grf->soc_con14, MCU_EXPERI_BASE_BIT31_BIT28_MASK,
MCU_EXPERI_BASE_BIT31_BIT28 << MCU_EXPERI_BASE_BIT31_BIT28_SHIFT);
rk_clrsetreg(&grf->soc_con13, MCU_EXPERI_BASE_BIT27_BIT12_MASK,
MCU_EXPERI_BASE_BIT27_BIT12 << MCU_EXPERI_BASE_BIT27_BIT12_SHIFT);
rk_clrsetreg(&cru->clksel_con[12], MCU_PLL_SEL_MASK | MCU_CLK_DIV_MASK,
(MCU_PLL_SEL_GPLL << MCU_PLL_SEL_SHIFT) |
(5 << MCU_CLK_DIV_SHIFT));
/* mcu dereset, for start running */
rk_clrreg(&cru->softrst_con[1], MCU_PO_SRST_MASK | MCU_SYS_SRST_MASK);
return 0;
}
int arch_early_init_r(void)
{
return mcu_init();
}
#endif
#ifdef CONFIG_SPL_BUILD
/*
* The SPL (and also the full U-Boot stage on the RK3368) will run in
* secure mode (i.e. EL3) and an ATF will eventually be booted before
* starting up the operating system... so we can initialize the SGRF
* here and rely on the ATF installing the final (secure) policy
* later.
*/
static inline uintptr_t sgrf_soc_con_addr(unsigned int no)
{
const uintptr_t SGRF_BASE =
(uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF);
return SGRF_BASE + sizeof(u32) * no;
}
static inline uintptr_t sgrf_busdmac_addr(unsigned int no)
{
const uintptr_t SGRF_BASE =
(uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF);
const uintptr_t SGRF_BUSDMAC_OFFSET = 0x100;
const uintptr_t SGRF_BUSDMAC_BASE = SGRF_BASE + SGRF_BUSDMAC_OFFSET;
return SGRF_BUSDMAC_BASE + sizeof(u32) * no;
}
static void sgrf_init(void)
{
struct rk3368_cru * const cru =
(struct rk3368_cru * const)rockchip_get_cru();
const u16 SGRF_SOC_CON_SEC = GENMASK(15, 0);
const u16 SGRF_BUSDMAC_CON0_SEC = BIT(2);
const u16 SGRF_BUSDMAC_CON1_SEC = GENMASK(15, 12);
/* Set all configurable IP to 'non secure'-mode */
rk_setreg(sgrf_soc_con_addr(5), SGRF_SOC_CON_SEC);
rk_setreg(sgrf_soc_con_addr(6), SGRF_SOC_CON_SEC);
rk_setreg(sgrf_soc_con_addr(7), SGRF_SOC_CON_SEC);
/*
* From rockchip-uboot/arch/arm/cpu/armv8/rk33xx/cpu.c
* Original comment: "ddr space set no secure mode"
*/
rk_clrreg(sgrf_soc_con_addr(8), SGRF_SOC_CON_SEC);
rk_clrreg(sgrf_soc_con_addr(9), SGRF_SOC_CON_SEC);
rk_clrreg(sgrf_soc_con_addr(10), SGRF_SOC_CON_SEC);
/* Set 'secure dma' to 'non secure'-mode */
rk_setreg(sgrf_busdmac_addr(0), SGRF_BUSDMAC_CON0_SEC);
rk_setreg(sgrf_busdmac_addr(1), SGRF_BUSDMAC_CON1_SEC);
dsb(); /* barrier */
rk_setreg(&cru->softrst_con[1], DMA1_SRST_REQ);
rk_setreg(&cru->softrst_con[4], DMA2_SRST_REQ);
dsb(); /* barrier */
udelay(10);
rk_clrreg(&cru->softrst_con[1], DMA1_SRST_REQ);
rk_clrreg(&cru->softrst_con[4], DMA2_SRST_REQ);
}
int arch_cpu_init(void)
{
/* Reset security, so we can use DMA in the MMC drivers */
sgrf_init();
return 0;
}
#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
/*
* N.B.: This is called before the device-model has been
* initialised. For this reason, we can not access
* the GRF address range using the syscon API.
*/
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
struct rk3368_grf * const grf =
(struct rk3368_grf * const)0xff770000;
enum {
GPIO2D1_MASK = GENMASK(3, 2),
GPIO2D1_GPIO = 0,
GPIO2D1_UART0_SOUT = (1 << 2),
GPIO2D0_MASK = GENMASK(1, 0),
GPIO2D0_GPIO = 0,
GPIO2D0_UART0_SIN = (1 << 0),
};
/* Enable early UART0 on the RK3368 */
rk_clrsetreg(&grf->gpio2d_iomux,
GPIO2D0_MASK, GPIO2D0_UART0_SIN);
rk_clrsetreg(&grf->gpio2d_iomux,
GPIO2D1_MASK, GPIO2D1_UART0_SOUT);
#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff1c0000)
struct rk3368_pmu_grf * const pmugrf __maybe_unused =
(struct rk3368_pmu_grf * const)0xff738000;
enum {
/* UART4 */
GPIO0D2_MASK = GENMASK(5, 4),
GPIO0D2_GPIO = 0,
GPIO0D2_UART4_SOUT = (3 << 4),
GPIO0D3_MASK = GENMASK(7, 6),
GPIO0D3_GPIO = 0,
GPIO0D3_UART4_SIN = (3 << 6),
};
/* Enable early UART4 on the PX5 */
rk_clrsetreg(&pmugrf->gpio0d_iomux,
GPIO0D2_MASK | GPIO0D3_MASK,
GPIO0D2_UART4_SOUT | GPIO0D3_UART4_SIN);
#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff690000)
struct rk3368_grf * const grf =
(struct rk3368_grf * const)0xff770000;
enum {
GPIO2A6_SHIFT = 12,
GPIO2A6_MASK = GENMASK(13, 12),
GPIO2A6_GPIO = 0,
GPIO2A6_UART2_SIN = (2 << GPIO2A6_SHIFT),
GPIO2A5_SHIFT = 10,
GPIO2A5_MASK = GENMASK(11, 10),
GPIO2A5_GPIO = 0,
GPIO2A5_UART2_SOUT = (2 << GPIO2A5_SHIFT),
};
/* Enable early UART2 on the RK3368 */
rk_clrsetreg(&grf->gpio2a_iomux,
GPIO2A6_MASK, GPIO2A6_UART2_SIN);
rk_clrsetreg(&grf->gpio2a_iomux,
GPIO2A5_MASK, GPIO2A5_UART2_SOUT);
#endif
}
#endif
|
