1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2016 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <spl_gpio.h>
#include <asm/armv8/mmu.h>
#include <asm/io.h>
#include <asm/arch-rockchip/gpio.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
DECLARE_GLOBAL_DATA_PTR;
#define GRF_EMMCCORE_CON11 0xff77f02c
#define GRF_BASE 0xff770000
static struct mm_region rk3399_mem_map[] = {
{
.virt = 0x0UL,
.phys = 0x0UL,
.size = 0xf8000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
.virt = 0xf8000000UL,
.phys = 0xf8000000UL,
.size = 0x08000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = rk3399_mem_map;
#ifdef CONFIG_SPL_BUILD
#define TIMER_END_COUNT_L 0x00
#define TIMER_END_COUNT_H 0x04
#define TIMER_INIT_COUNT_L 0x10
#define TIMER_INIT_COUNT_H 0x14
#define TIMER_CONTROL_REG 0x1c
#define TIMER_EN 0x1
#define TIMER_FMODE BIT(0)
#define TIMER_RMODE BIT(1)
void rockchip_stimer_init(void)
{
/* If Timer already enabled, don't re-init it */
u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
if (reg & TIMER_EN)
return;
writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_END_COUNT_L);
writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_END_COUNT_H);
writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_INIT_COUNT_L);
writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_INIT_COUNT_H);
writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE + \
TIMER_CONTROL_REG);
}
#endif
int dram_init_banksize(void)
{
size_t max_size = min((unsigned long)gd->ram_size, gd->ram_top);
/* Reserve 0x200000 for ATF bl31 */
gd->bd->bi_dram[0].start = 0x200000;
gd->bd->bi_dram[0].size = max_size - gd->bd->bi_dram[0].start;
return 0;
}
int arch_cpu_init(void)
{
#ifdef CONFIG_SPL_BUILD
struct rk3399_pmusgrf_regs *sgrf;
struct rk3399_grf_regs *grf;
/*
* Disable DDR and SRAM security regions.
*
* As we are entered from the BootROM, the region from
* 0x0 through 0xfffff (i.e. the first MB of memory) will
* be protected. This will cause issues with the DW_MMC
* driver, which tries to DMA from/to the stack (likely)
* located in this range.
*/
sgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF);
rk_clrsetreg(&sgrf->ddr_rgn_con[16], 0x1ff, 0);
rk_clrreg(&sgrf->slv_secure_con4, 0x2000);
/* eMMC clock generator: disable the clock multipilier */
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
rk_clrreg(&grf->emmccore_con[11], 0x0ff);
#endif
return 0;
}
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
#define GRF_BASE 0xff770000
#define GPIO0_BASE 0xff720000
#define PMUGRF_BASE 0xff320000
struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
#ifdef CONFIG_TARGET_CHROMEBOOK_BOB
struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
#endif
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
/* Enable early UART0 on the RK3399 */
rk_clrsetreg(&grf->gpio2c_iomux,
GRF_GPIO2C0_SEL_MASK,
GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
rk_clrsetreg(&grf->gpio2c_iomux,
GRF_GPIO2C1_SEL_MASK,
GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff1B0000)
/* Enable early UART3 on the RK3399 */
rk_clrsetreg(&grf->gpio3b_iomux,
GRF_GPIO3B6_SEL_MASK,
GRF_UART3_SIN << GRF_GPIO3B6_SEL_SHIFT);
rk_clrsetreg(&grf->gpio3b_iomux,
GRF_GPIO3B7_SEL_MASK,
GRF_UART3_SOUT << GRF_GPIO3B7_SEL_SHIFT);
#else
# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
rk_setreg(&grf->io_vsel, 1 << 0);
/*
* Let's enable these power rails here, we are already running the SPI
* Flash based code.
*/
spl_gpio_output(gpio, GPIO(BANK_B, 2), 1); /* PP1500_EN */
spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); /* PP3000_EN */
spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL);
#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
/* Enable early UART2 channel C on the RK3399 */
rk_clrsetreg(&grf->gpio4c_iomux,
GRF_GPIO4C3_SEL_MASK,
GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
rk_clrsetreg(&grf->gpio4c_iomux,
GRF_GPIO4C4_SEL_MASK,
GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
/* Set channel C as UART2 input */
rk_clrsetreg(&grf->soc_con7,
GRF_UART_DBG_SEL_MASK,
GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
#endif
}
#endif
#ifdef CONFIG_SPL_BUILD
const char *spl_decode_boot_device(u32 boot_device)
{
int i;
static const struct {
u32 boot_device;
const char *ofpath;
} spl_boot_devices_tbl[] = {
{ BOOT_DEVICE_MMC1, "/dwmmc@fe320000" },
{ BOOT_DEVICE_MMC2, "/sdhci@fe330000" },
{ BOOT_DEVICE_SPI, "/spi@ff1d0000" },
};
for (i = 0; i < ARRAY_SIZE(spl_boot_devices_tbl); ++i)
if (spl_boot_devices_tbl[i].boot_device == boot_device)
return spl_boot_devices_tbl[i].ofpath;
return NULL;
}
void spl_perform_fixups(struct spl_image_info *spl_image)
{
void *blob = spl_image->fdt_addr;
const char *boot_ofpath;
int chosen;
/*
* Inject the ofpath of the device the full U-Boot (or Linux in
* Falcon-mode) was booted from into the FDT, if a FDT has been
* loaded at the same time.
*/
if (!blob)
return;
boot_ofpath = spl_decode_boot_device(spl_image->boot_device);
if (!boot_ofpath) {
pr_err("%s: could not map boot_device to ofpath\n", __func__);
return;
}
chosen = fdt_find_or_add_subnode(blob, 0, "chosen");
if (chosen < 0) {
pr_err("%s: could not find/create '/chosen'\n", __func__);
return;
}
fdt_setprop_string(blob, chosen,
"u-boot,spl-boot-device", boot_ofpath);
}
#endif
|
