1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
*/
#include <common.h>
#include <asm/io.h>
#include <errno.h>
#include <fdtdec.h>
#include <linux/libfdt.h>
#include <altera.h>
#include <miiphy.h>
#include <netdev.h>
#include <watchdog.h>
#include <asm/arch/misc.h>
#include <asm/arch/reset_manager.h>
#include <asm/arch/scan_manager.h>
#include <asm/arch/system_manager.h>
#include <asm/arch/nic301.h>
#include <asm/arch/scu.h>
#include <asm/pl310.h>
DECLARE_GLOBAL_DATA_PTR;
static const struct pl310_regs *const pl310 =
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
struct bsel bsel_str[] = {
{ "rsvd", "Reserved", },
{ "fpga", "FPGA (HPS2FPGA Bridge)", },
{ "nand", "NAND Flash (1.8V)", },
{ "nand", "NAND Flash (3.0V)", },
{ "sd", "SD/MMC External Transceiver (1.8V)", },
{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
{ "qspi", "QSPI Flash (1.8V)", },
{ "qspi", "QSPI Flash (3.0V)", },
};
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
return 0;
}
void enable_caches(void)
{
#ifndef CONFIG_SYS_ICACHE_OFF
icache_enable();
#endif
#ifndef CONFIG_SYS_DCACHE_OFF
dcache_enable();
#endif
}
void v7_outer_cache_enable(void)
{
/* Disable the L2 cache */
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
/* enable BRESP, instruction and data prefetch, full line of zeroes */
setbits_le32(&pl310->pl310_aux_ctrl,
L310_AUX_CTRL_DATA_PREFETCH_MASK |
L310_AUX_CTRL_INST_PREFETCH_MASK |
L310_SHARED_ATT_OVERRIDE_ENABLE);
/* Enable the L2 cache */
setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
}
void v7_outer_cache_disable(void)
{
/* Disable the L2 cache */
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
}
#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
int overwrite_console(void)
{
return 0;
}
#endif
#ifdef CONFIG_FPGA
/*
* FPGA programming support for SoC FPGA Cyclone V
*/
static Altera_desc altera_fpga[] = {
{
/* Family */
Altera_SoCFPGA,
/* Interface type */
fast_passive_parallel,
/* No limitation as additional data will be ignored */
-1,
/* No device function table */
NULL,
/* Base interface address specified in driver */
NULL,
/* No cookie implementation */
0
},
};
/* add device descriptor to FPGA device table */
void socfpga_fpga_add(void)
{
int i;
fpga_init();
for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
fpga_add(fpga_altera, &altera_fpga[i]);
}
#endif
int arch_cpu_init(void)
{
#ifdef CONFIG_HW_WATCHDOG
/*
* In case the watchdog is enabled, make sure to (re-)configure it
* so that the defined timeout is valid. Otherwise the SPL (Perloader)
* timeout value is still active which might too short for Linux
* booting.
*/
hw_watchdog_init();
#else
/*
* If the HW watchdog is NOT enabled, make sure it is not running,
* for example because it was enabled in the preloader. This might
* trigger a watchdog-triggered reboot of Linux kernel later.
* Toggle watchdog reset, so watchdog in not running state.
*/
socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
#endif
return 0;
}
|
