1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
// SPDX-License-Identifier: GPL-2.0+
/*
* A83 specific clock code
*
* (C) Copyright 2007-2012
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
* Tom Cubie <tangliang@allwinnertech.com>
*
* (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/prcm.h>
#include <asm/arch/sys_proto.h>
#include <linux/delay.h>
#ifdef CONFIG_SPL_BUILD
void clock_init_safe(void)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
clock_set_pll1(408000000);
/* enable pll_hsic, default is 480M */
writel(PLL8_CFG_DEFAULT, &ccm->pll8_cfg);
writel(readl(&ccm->pll8_cfg) | (0x1 << 31), &ccm->pll8_cfg);
while (!(readl(&ccm->pll_stable_status) & (1 << 8))) {}
/* switch to default 24MHz before changing to hsic */
writel(0x0, &ccm->cci400_cfg);
sdelay(50);
writel(CCM_CCI400_CLK_SEL_HSIC, &ccm->cci400_cfg);
sdelay(100);
/* switch before changing pll6 */
clrsetbits_le32(&ccm->ahb1_apb1_div, AHB1_CLK_SRC_MASK,
AHB1_CLK_SRC_OSC24M);
writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
while (!(readl(&ccm->pll_stable_status) & (1 << 6))) {}
writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
writel(CCM_MBUS_RESET_RESET, &ccm->mbus_reset);
writel(MBUS_CLK_DEFAULT, &ccm->mbus_clk_cfg);
/* timestamp */
writel(1, 0x01720000);
}
#endif
void clock_init_uart(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* uart clock source is apb2 */
writel(APB2_CLK_SRC_OSC24M|
APB2_CLK_RATE_N_1|
APB2_CLK_RATE_M(1),
&ccm->apb2_div);
/* open the clock for uart */
setbits_le32(&ccm->apb2_gate,
CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
CONFIG_CONS_INDEX - 1));
/* deassert uart reset */
setbits_le32(&ccm->apb2_reset_cfg,
1 << (APB2_RESET_UART_SHIFT +
CONFIG_CONS_INDEX - 1));
}
#ifdef CONFIG_SPL_BUILD
void clock_set_pll1(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
const int p = 0;
/* Switch to 24MHz clock while changing PLL1 */
writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
AXI_DIV_2 << AXI1_DIV_SHIFT |
CPU_CLK_SRC_OSC24M << C0_CPUX_CLK_SRC_SHIFT |
CPU_CLK_SRC_OSC24M << C1_CPUX_CLK_SRC_SHIFT,
&ccm->cpu_axi_cfg);
/* clk = 24*n/p, p is ignored if clock is >288MHz */
writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
CCM_PLL1_CTRL_N(clk / 24000000),
&ccm->pll1_c0_cfg);
while (!(readl(&ccm->pll_stable_status) & 0x01)) {}
writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
CCM_PLL1_CTRL_N(clk / (24000000)),
&ccm->pll1_c1_cfg);
while (!(readl(&ccm->pll_stable_status) & 0x02)) {}
/* Switch CPU to PLL1 */
writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
AXI_DIV_2 << AXI1_DIV_SHIFT |
CPU_CLK_SRC_PLL1 << C0_CPUX_CLK_SRC_SHIFT |
CPU_CLK_SRC_PLL1 << C1_CPUX_CLK_SRC_SHIFT,
&ccm->cpu_axi_cfg);
}
#endif
void clock_set_pll5(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
unsigned int div1 = 0, div2 = 0;
/* A83T PLL5 DDR rate = 24000000 * (n+1)/(div1+1)/(div2+1) */
writel(CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD |
CCM_PLL5_CTRL_N(clk / (24000000)) |
div2 << CCM_PLL5_DIV2_SHIFT |
div1 << CCM_PLL5_DIV1_SHIFT, &ccm->pll5_cfg);
udelay(5500);
}
unsigned int clock_get_pll6(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
uint32_t rval = readl(&ccm->pll6_cfg);
int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
return 24000000 * n / div1 / div2;
}
|
