blob: efada9f6f8d497d052c5e6b9ff8e48c84599a760 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/inca-ip.h>
/*******************************************************************************
*
* get_cpuclk - returns the frequency of the CPU.
*
* Gets the value directly from the INCA-IP hardware.
*
* RETURNS:
* 150.000.000 for 150 MHz
* 133.333.333 for 133 MHz (= 400MHz/3)
* 100.000.000 for 100 MHz (= 400MHz/4)
* NOTE:
* This functions should be used by the hardware driver to get the correct
* frequency of the CPU. Don't use the macros, which are set to init the CPU
* frequency in the ROM code.
*/
uint incaip_get_cpuclk (void)
{
/*-------------------------------------------------------------------------*/
/* CPU Clock Input Multiplexer (MUX I) */
/* Multiplexer MUX I selects the maximum input clock to the CPU. */
/*-------------------------------------------------------------------------*/
if (*((volatile ulong *) INCA_IP_CGU_CGU_MUXCR) &
INCA_IP_CGU_CGU_MUXCR_MUXI) {
/* MUX I set to 150 MHz clock */
return 150000000;
} else {
/* MUX I set to 100/133 MHz clock */
if (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0x40) {
/* Division value is 1/3, maximum CPU operating */
/* frequency is 133.3 MHz */
return 133333333;
} else {
/* Division value is 1/4, maximum CPU operating */
/* frequency is 100 MHz */
return 100000000;
}
}
}
/*******************************************************************************
*
* get_fpiclk - returns the frequency of the FPI bus.
*
* Gets the value directly from the INCA-IP hardware.
*
* RETURNS: Frquency in Hz
*
* NOTE:
* This functions should be used by the hardware driver to get the correct
* frequency of the CPU. Don't use the macros, which are set to init the CPU
* frequency in the ROM code.
* The calculation for the
*/
uint incaip_get_fpiclk (void)
{
uint clkCPU;
clkCPU = incaip_get_cpuclk ();
switch (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0xC) {
case 0x4:
return clkCPU >> 1; /* devided by 2 */
break;
case 0x8:
return clkCPU >> 2; /* devided by 4 */
break;
default:
return clkCPU;
break;
}
}
int incaip_set_cpuclk (void)
{
extern void ebu_init(long);
extern void cgu_init(long);
extern void sdram_init(long);
char tmp[64];
ulong cpuclk;
if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0) {
cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
cgu_init (cpuclk);
ebu_init (cpuclk);
sdram_init (cpuclk);
}
return 0;
}
|
