blob: e0e610ade6e445ac93fe4ffd152378414378aa57 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Microsemi Corporation
*/
#include <common.h>
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/reboot.h>
void _machine_restart(void)
{
#if defined(CONFIG_SOC_JR2)
register u32 reg = readl(BASE_CFG + ICPU_GENERAL_CTRL);
/* Set owner */
reg &= ~ICPU_GENERAL_CTRL_IF_SI_OWNER_M;
reg |= ICPU_GENERAL_CTRL_IF_SI_OWNER(1);
/* Set boot mode */
reg |= ICPU_GENERAL_CTRL_BOOT_MODE_ENA;
writel(reg, BASE_CFG + ICPU_GENERAL_CTRL);
/* Read back in order to make BOOT mode setting active */
reg = readl(BASE_CFG + ICPU_GENERAL_CTRL);
/* Reset CPU only - still executing _here_. but from cache */
writel(readl(BASE_CFG + ICPU_RESET) |
ICPU_RESET_CORE_RST_CPU_ONLY |
ICPU_RESET_CORE_RST_FORCE,
BASE_CFG + ICPU_RESET);
#else
register u32 resetbits = PERF_SOFT_RST_SOFT_CHIP_RST;
(void)readl(BASE_DEVCPU_GCB + PERF_SOFT_RST);
/* Make sure VCore is NOT protected from reset */
clrbits_le32(BASE_CFG + ICPU_RESET, ICPU_RESET_CORE_RST_PROTECT);
/* Change to SPI bitbang for SPI reset workaround... */
writel(ICPU_SW_MODE_SW_SPI_CS_OE(1) | ICPU_SW_MODE_SW_SPI_CS(1) |
ICPU_SW_MODE_SW_PIN_CTRL_MODE, BASE_CFG + ICPU_SW_MODE);
/* Do the global reset */
writel(resetbits, BASE_DEVCPU_GCB + PERF_SOFT_RST);
#endif
while (1)
; /* NOP */
}
|
