1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
|
/*
* (C) Copyright 2004, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm-offsets.h>
#include <config.h>
#include <version.h>
/* RESTART */
.text
.global _start
_start:
wrctl status, r0 /* Disable interrupts */
/*
* ICACHE INIT -- only the icache line at the reset address
* is invalidated at reset. So the init must stay within
* the cache line size (8 words). If GERMS is used, we'll
* just be invalidating the cache a second time. If cache
* is not implemented initi behaves as nop.
*/
ori r4, r0, %lo(CONFIG_SYS_ICACHELINE_SIZE)
movhi r5, %hi(CONFIG_SYS_ICACHE_SIZE)
ori r5, r5, %lo(CONFIG_SYS_ICACHE_SIZE)
0: initi r5
sub r5, r5, r4
bgt r5, r0, 0b
br _except_end /* Skip the tramp */
/*
* EXCEPTION TRAMPOLINE -- the following gets copied
* to the exception address (below), but is otherwise at the
* default exception vector offset (0x0020).
*/
_except_start:
movhi et, %hi(_exception)
ori et, et, %lo(_exception)
jmp et
_except_end:
/*
* INTERRUPTS -- for now, all interrupts masked and globally
* disabled.
*/
wrctl ienable, r0 /* All disabled */
/*
* DCACHE INIT -- if dcache not implemented, initd behaves as
* nop.
*/
movhi r4, %hi(CONFIG_SYS_DCACHELINE_SIZE)
ori r4, r4, %lo(CONFIG_SYS_DCACHELINE_SIZE)
movhi r5, %hi(CONFIG_SYS_DCACHE_SIZE)
ori r5, r5, %lo(CONFIG_SYS_DCACHE_SIZE)
mov r6, r0
1: initd 0(r6)
add r6, r6, r4
bltu r6, r5, 1b
/*
* RELOCATE CODE, DATA & COMMAND TABLE -- the following code
* assumes code, data and the command table are all
* contiguous. This lets us relocate everything as a single
* block. Make sure the linker script matches this ;-)
*/
nextpc r4
_cur: movhi r5, %hi(_cur - _start)
ori r5, r5, %lo(_cur - _start)
sub r4, r4, r5 /* r4 <- cur _start */
mov r8, r4
movhi r5, %hi(_start)
ori r5, r5, %lo(_start) /* r5 <- linked _start */
beq r4, r5, 3f
movhi r6, %hi(CONFIG_SYS_MONITOR_LEN)
ori r6, r6, %lo(CONFIG_SYS_MONITOR_LEN)
add r6, r6, r5
2: ldwio r7, 0(r4)
addi r4, r4, 4
stwio r7, 0(r5)
addi r5, r5, 4
bne r5, r6, 2b
3:
/* JUMP TO RELOC ADDR */
movhi r4, %hi(_reloc)
ori r4, r4, %lo(_reloc)
jmp r4
_reloc:
/*
* COPY EXCEPTION TRAMPOLINE -- copy the tramp to the
* exception address. Define CONFIG_ROM_STUBS to prevent
* the copy (e.g. exception in flash or in other
* softare/firmware component).
*/
#if !defined(CONFIG_ROM_STUBS)
movhi r4, %hi(_except_start)
ori r4, r4, %lo(_except_start)
movhi r5, %hi(_except_end)
ori r5, r5, %lo(_except_end)
movhi r6, %hi(CONFIG_SYS_EXCEPTION_ADDR)
ori r6, r6, %lo(CONFIG_SYS_EXCEPTION_ADDR)
beq r4, r6, 7f /* Skip if at proper addr */
6: ldwio r7, 0(r4)
stwio r7, 0(r6)
addi r4, r4, 4
addi r6, r6, 4
bne r4, r5, 6b
7:
#endif
/* STACK INIT -- zero top two words for call back chain. */
movhi sp, %hi(CONFIG_SYS_INIT_SP)
ori sp, sp, %lo(CONFIG_SYS_INIT_SP)
addi sp, sp, -8
stw r0, 0(sp)
stw r0, 4(sp)
mov fp, sp
/* Allocate and zero GD, update SP */
mov r4, sp
movhi r2, %hi(board_init_f_mem@h)
ori r2, r2, %lo(board_init_f_mem@h)
callr r2
/* Update stack- and frame-pointers */
mov sp, r2
mov fp, sp
/* Call board_init_f -- never returns */
mov r4, r0
movhi r2, %hi(board_init_f@h)
ori r2, r2, %lo(board_init_f@h)
callr r2
/*
* NEVER RETURNS -- but branch to the _start just
* in case ;-)
*/
br _start
/*
* relocate_code -- Nios2 handles the relocation above. But
* the generic board code monkeys with the heap, stack, etc.
* (it makes some assumptions that may not be appropriate
* for Nios). Nevertheless, we capitulate here.
*
* We'll call the board_init_r from here since this isn't
* supposed to return.
*
* void relocate_code (ulong sp, gd_t *global_data,
* ulong reloc_addr)
* __attribute__ ((noreturn));
*/
.text
.global relocate_code
relocate_code:
mov sp, r4 /* Set the new sp */
mov r4, r5
/*
* ZERO BSS/SBSS -- bss and sbss are assumed to be adjacent
* and between __bss_start and __bss_end.
*/
movhi r5, %hi(__bss_start)
ori r5, r5, %lo(__bss_start)
movhi r6, %hi(__bss_end)
ori r6, r6, %lo(__bss_end)
beq r5, r6, 5f
4: stwio r0, 0(r5)
addi r5, r5, 4
bne r5, r6, 4b
5:
movhi r8, %hi(board_init_r@h)
ori r8, r8, %lo(board_init_r@h)
callr r8
ret
|
