1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
|
/*
* Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc83xx.h>
#include <ioports.h>
#include <asm/io.h>
#include <asm/processor.h>
#ifdef CONFIG_USB_EHCI_FSL
#include <usb/ehci-ci.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
int open_drain, int assign);
extern void qe_init(uint qe_base);
extern void qe_reset(void);
static void config_qe_ioports(void)
{
u8 port, pin;
int dir, open_drain, assign;
int i;
for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
port = qe_iop_conf_tab[i].port;
pin = qe_iop_conf_tab[i].pin;
dir = qe_iop_conf_tab[i].dir;
open_drain = qe_iop_conf_tab[i].open_drain;
assign = qe_iop_conf_tab[i].assign;
qe_config_iopin(port, pin, dir, open_drain, assign);
}
}
#endif
/*
* Breathe some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f (volatile immap_t * im)
{
__be32 acr_mask =
#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
ACR_PIPE_DEP |
#endif
#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
ACR_RPTCNT |
#endif
#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
ACR_APARK |
#endif
#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
ACR_PARKM |
#endif
0;
__be32 acr_val =
#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
(CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
#endif
#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
(CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
#endif
#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
(CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) |
#endif
#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
(CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) |
#endif
0;
__be32 spcr_mask =
#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */
SPCR_OPT |
#endif
#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
SPCR_TSECEP |
#endif
#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
SPCR_TSEC1EP |
#endif
#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
SPCR_TSEC2EP |
#endif
0;
__be32 spcr_val =
#ifdef CONFIG_SYS_SPCR_OPT
(CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) |
#endif
#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
(CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
#endif
#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
(CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
#endif
#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
(CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
#endif
0;
__be32 sccr_mask =
#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
SCCR_ENCCM |
#endif
#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
SCCR_PCICM |
#endif
#ifdef CONFIG_SYS_SCCR_PCIEXP1CM /* PCIE1 clock mode */
SCCR_PCIEXP1CM |
#endif
#ifdef CONFIG_SYS_SCCR_PCIEXP2CM /* PCIE2 clock mode */
SCCR_PCIEXP2CM |
#endif
#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
SCCR_TSECCM |
#endif
#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
SCCR_TSEC1CM |
#endif
#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
SCCR_TSEC2CM |
#endif
#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
SCCR_TSEC1ON |
#endif
#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
SCCR_TSEC2ON |
#endif
#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
SCCR_USBMPHCM |
#endif
#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
SCCR_USBDRCM |
#endif
#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
SCCR_SATACM |
#endif
0;
__be32 sccr_val =
#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
(CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
(CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_PCIEXP1CM /* PCIE1 clock mode */
(CONFIG_SYS_SCCR_PCIEXP1CM << SCCR_PCIEXP1CM_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_PCIEXP2CM /* PCIE2 clock mode */
(CONFIG_SYS_SCCR_PCIEXP2CM << SCCR_PCIEXP2CM_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
(CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
(CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
(CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
(CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
(CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
(CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
(CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
#endif
#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
(CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) |
#endif
0;
__be32 lcrr_mask =
#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
LCRR_DBYP |
#endif
#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */
LCRR_EADC |
#endif
#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
LCRR_CLKDIV |
#endif
0;
__be32 lcrr_val =
#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
CONFIG_SYS_LCRR_DBYP |
#endif
#ifdef CONFIG_SYS_LCRR_EADC
CONFIG_SYS_LCRR_EADC |
#endif
#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
CONFIG_SYS_LCRR_CLKDIV |
#endif
0;
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
/* global data region was cleared in start.S */
/* system performance tweaking */
clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val);
clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val);
clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val);
/* RSR - Reset Status Register - clear all status (4.6.1.3) */
gd->arch.reset_status = __raw_readl(&im->reset.rsr);
__raw_writel(~(RSR_RES), &im->reset.rsr);
/* AER - Arbiter Event Register - store status */
gd->arch.arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
gd->arch.arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
/*
* RMR - Reset Mode Register
* contains checkstop reset enable (4.6.1.4)
*/
__raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr);
/* LCRR - Clock Ratio Register (10.3.1.16)
* write, read, and isync per MPC8379ERM rev.1 CLKDEV field description
*/
clrsetbits_be32(&im->im_lbc.lcrr, lcrr_mask, lcrr_val);
__raw_readl(&im->im_lbc.lcrr);
isync();
/* Enable Time Base & Decrementer ( so we will have udelay() )*/
setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
/* System General Purpose Register */
#ifdef CONFIG_SYS_SICRH
#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313)
/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
__raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
&im->sysconf.sicrh);
#else
__raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh);
#endif
#endif
#ifdef CONFIG_SYS_SICRL
__raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
#endif
#ifdef CONFIG_SYS_GPR1
__raw_writel(CONFIG_SYS_GPR1, &im->sysconf.gpr1);
#endif
#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
__raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
#endif
#ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */
__raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir);
#endif
#ifdef CONFIG_QE
/* Config QE ioports */
config_qe_ioports();
#endif
/* Set up preliminary BR/OR regs */
init_early_memctl_regs();
/* Local Access window setup */
#if defined(CONFIG_SYS_LBLAWBAR0_PRELIM) && defined(CONFIG_SYS_LBLAWAR0_PRELIM)
im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM;
im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM;
#else
#error CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
#endif
#if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM)
im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM;
im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM;
#endif
#if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM;
im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM;
#endif
#if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM)
im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM;
im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM;
#endif
#if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM)
im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM;
im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM;
#endif
#if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM)
im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM;
im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM;
#endif
#if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM)
im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM;
im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM;
#endif
#if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM)
im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM;
im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM;
#endif
#ifdef CONFIG_SYS_GPIO1_PRELIM
im->gpio[0].dat = CONFIG_SYS_GPIO1_DAT;
im->gpio[0].dir = CONFIG_SYS_GPIO1_DIR;
#endif
#ifdef CONFIG_SYS_GPIO2_PRELIM
im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT;
im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
#endif
#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_MPC831x)
uint32_t temp;
struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR;
/* Configure interface. */
setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
/* Wait for clock to stabilize */
do {
temp = __raw_readl(&ehci->control);
udelay(1000);
} while (!(temp & PHY_CLK_VALID));
#endif
}
int cpu_init_r (void)
{
#ifdef CONFIG_QE
uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */
qe_init(qe_base);
qe_reset();
#endif
return 0;
}
/*
* Print out the bus arbiter event
*/
#if defined(CONFIG_DISPLAY_AER_FULL)
static int print_83xx_arb_event(int force)
{
static char* event[] = {
"Address Time Out",
"Data Time Out",
"Address Only Transfer Type",
"External Control Word Transfer Type",
"Reserved Transfer Type",
"Transfer Error",
"reserved",
"reserved"
};
static char* master[] = {
"e300 Core Data Transaction",
"reserved",
"e300 Core Instruction Fetch",
"reserved",
"TSEC1",
"TSEC2",
"USB MPH",
"USB DR",
"Encryption Core",
"I2C Boot Sequencer",
"JTAG",
"reserved",
"eSDHC",
"PCI1",
"PCI2",
"DMA",
"QUICC Engine 00",
"QUICC Engine 01",
"QUICC Engine 10",
"QUICC Engine 11",
"reserved",
"reserved",
"reserved",
"reserved",
"SATA1",
"SATA2",
"SATA3",
"SATA4",
"reserved",
"PCI Express 1",
"PCI Express 2",
"TDM-DMAC"
};
static char *transfer[] = {
"Address-only, Clean Block",
"Address-only, lwarx reservation set",
"Single-beat or Burst write",
"reserved",
"Address-only, Flush Block",
"reserved",
"Burst write",
"reserved",
"Address-only, sync",
"Address-only, tlbsync",
"Single-beat or Burst read",
"Single-beat or Burst read",
"Address-only, Kill Block",
"Address-only, icbi",
"Burst read",
"reserved",
"Address-only, eieio",
"reserved",
"Single-beat write",
"reserved",
"ecowx - Illegal single-beat write",
"reserved",
"reserved",
"reserved",
"Address-only, TLB Invalidate",
"reserved",
"Single-beat or Burst read",
"reserved",
"eciwx - Illegal single-beat read",
"reserved",
"Burst read",
"reserved"
};
int etype = (gd->arch.arbiter_event_attributes & AEATR_EVENT)
>> AEATR_EVENT_SHIFT;
int mstr_id = (gd->arch.arbiter_event_attributes & AEATR_MSTR_ID)
>> AEATR_MSTR_ID_SHIFT;
int tbst = (gd->arch.arbiter_event_attributes & AEATR_TBST)
>> AEATR_TBST_SHIFT;
int tsize = (gd->arch.arbiter_event_attributes & AEATR_TSIZE)
>> AEATR_TSIZE_SHIFT;
int ttype = (gd->arch.arbiter_event_attributes & AEATR_TTYPE)
>> AEATR_TTYPE_SHIFT;
if (!force && !gd->arch.arbiter_event_address)
return 0;
puts("Arbiter Event Status:\n");
printf(" Event Address: 0x%08lX\n",
gd->arch.arbiter_event_address);
printf(" Event Type: 0x%1x = %s\n", etype, event[etype]);
printf(" Master ID: 0x%02x = %s\n", mstr_id, master[mstr_id]);
printf(" Transfer Size: 0x%1x = %d bytes\n", (tbst<<3) | tsize,
tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize);
printf(" Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]);
return gd->arch.arbiter_event_address;
}
#elif defined(CONFIG_DISPLAY_AER_BRIEF)
static int print_83xx_arb_event(int force)
{
if (!force && !gd->arch.arbiter_event_address)
return 0;
printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n",
gd->arch.arbiter_event_attributes,
gd->arch.arbiter_event_address);
return gd->arch.arbiter_event_address;
}
#endif /* CONFIG_DISPLAY_AER_xxxx */
/*
* Figure out the cause of the reset
*/
int prt_83xx_rsr(void)
{
static struct {
ulong mask;
char *desc;
} bits[] = {
{
RSR_SWSR, "Software Soft"}, {
RSR_SWHR, "Software Hard"}, {
RSR_JSRS, "JTAG Soft"}, {
RSR_CSHR, "Check Stop"}, {
RSR_SWRS, "Software Watchdog"}, {
RSR_BMRS, "Bus Monitor"}, {
RSR_SRS, "External/Internal Soft"}, {
RSR_HRS, "External/Internal Hard"}
};
static int n = ARRAY_SIZE(bits);
ulong rsr = gd->arch.reset_status;
int i;
char *sep;
puts("Reset Status:");
sep = " ";
for (i = 0; i < n; i++)
if (rsr & bits[i].mask) {
printf("%s%s", sep, bits[i].desc);
sep = ", ";
}
puts("\n");
#if defined(CONFIG_DISPLAY_AER_FULL) || defined(CONFIG_DISPLAY_AER_BRIEF)
print_83xx_arb_event(rsr & RSR_BMRS);
#endif
puts("\n");
return 0;
}
|
